Browse
Submit Data
Databases
API
Help

Dataset Information

9 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Recovery of steroidal glucosiduronic acids from organic solvents containing anionic liquid ion-exchangers.

ABSTRACT: Solutions of anionic liquid ion-exchangers in organic solvents are potentially useful for extracting steroidal glucosiduronic acids from biological fluids and for purifying mixtures of these acids by chromatography. If a glucosiduronic acid is to be isolated in pure form after either of these procedures, it is necessary to separate it from the ion-exchanger. Separation from an organic solution of tetraheptylammonium chloride may be accomplished by extraction with water under the following conditions, which promote transfer of a glucosiduronate to the aqueous phase: (1) an appropriate solvent (diluent) as the organic phase, (2) the presence in the two-phase mixture of an anion such as myristate or dodecyl sulphate to combine with the tetraheptylammonium ion, and (3) an increase of the pH of the aqueous phase in association with the presence of myristate or dodecyl sulphate. The foregoing factors apply also to removal of glucosiduronates from organic solutions of ion exchangers that are hydrochlorides of tertiary, secondary, or primary amines. Since these amines exert progressively less solubilizing effect for glucosiduronates as the pH of the aqueous phase is increased, the conjugates can be released from the organic phase by adjusting the pH to 10 and omitting the myristate or dodecyl sulphate.

SUBMITTER: Mattox VR

PROVIDER: S-EPMC1178410 | biostudies-other | 1972 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Extraction of steroidal glucosideronic acids from aqueous solutions by anionic liquid ion-exchangers.

Project description:A pilot study on the extraction of three steroidal glucosiduronic acids from water into organic solutions of liquid ion-exchangers is reported. A single extraction of a 0.5mm aqueous solution of either 11-deoxycorticosterone 21-glucosiduronic acid or cortisone 21-glucosiduronic acid with 0.1m-tetraheptylammonium chloride in chloroform took more than 99% of the conjugate into the organic phase; under the same conditions, the very polar conjugate, beta-cortol 3-glucosiduronic acid, was extracted to the extent of 43%. The presence of a small amount of chloride, acetate, or sulphate ion in the aqueous phase inhibited extraction, but making the aqueous phase 4.0m with ammonium sulphate promoted extraction strongly. An increase in the concentration of ion-exchanger in the organic phase also promoted extraction. The amount of cortisone 21-glucosiduronic acid extracted by tetraheptylammonium chloride over the pH range of 3.9 to 10.7 was essentially constant. Chloroform solutions of a tertiary, a secondary, or a primary amine hydrochloride also will extract cortisone 21-glucosiduronic acid from water. The various liquid ion exchangers will extract steroidal glucosiduronic acid methyl esters from water into chloroform, although less completely than the corresponding free acids. The extraction of the glucosiduronic acids from water by tetraheptylammonium chloride occurs by an ion-exchange process; extraction of the esters does not involve ion exchange.

| S-EPMC1178409 | biostudies-other

Biodesulfurization in biphasic systems containing organic solvents.

Project description:Biphasic systems can overcome the problem of low productivity in conventional media and have been exploited for biocatalysis. Solvent-tolerant microorganisms are useful in biotransformation with whole cells in biphasic reactions. A solvent-tolerant desulfurizing bacterium, Pseudomonas putida A4, was constructed by introducing the biodesulfurizing gene cluster dszABCD, which was from Rhodococcus erythropolis XP, into the solvent-tolerant strain P. putida Idaho. Biphasic reactions were performed to investigate the desulfurization of various sulfur-containing heterocyclic compounds in the presence of various organic solvents. P. putida A4 had the same substrate range as R. erythropolis XP and could degrade dibenzothiophene at a specific rate of 1.29 mM g (dry weight) of cells(-1) h(-1) for the first 2 h in the presence of 10% (vol/vol) p-xylene. P. putida A4 was also able to degrade dibenzothiophene in the presence of many other organic solvents at a concentration of 10% (vol/vol). This study is a significant step in the exploration of the biotechnological potential of novel biocatalysts for developing an efficient biodesulfurization process in biphasic reaction mixtures containing toxic organic solvents.

| S-EPMC1489339 | biostudies-literature

Mesogenic Polyelectrolyte Gels Absorb Organic Solvents and Liquid Crystalline Molecules.

Project description:In this paper, mesogenic polyelectrolyte gels (MPEgels) tethering mesogenic groups on the side chains were synthesized from a mesogenic monomer and ionic monomer via a conventional radical polymerization process. The obtained MPEgels absorbed various organic solvents in a wide range of dielectric constants from chloroform (ε = 7.6) to DMSO (ε = 46.5). The electrostatic repulsion among the polymer chains and the osmotic pressure between the interior and exterior of the MPEgel is responsible for the high swelling ability, revealed by the common ion effect using tetra(n-hexyl)ammonium tetra(3,5-bis(trifluoromethyl)phenylborate (THATFPB). The obtained MPEgels could also absorb liquid crystalline molecules such as 4-cyano-4'-pentylbiphenyl (5CB), analogously caused by the above-mentioned polyelectrolyte characteristic. The MPEgels exhibited liquid crystal transition temperature (TNI) on differential scanning calorimetry (DSC) measurement, and the increase of the ionic group content lowered TNI. The MPEgels absorbing liquid crystalline molecules exhibited differing TNI, dependent on the compatibility of the mesogenic group on the side chain to the liquid crystalline molecule.

| S-EPMC6432411 | biostudies-other

High-efficient liquid exfoliation of 2D metal-organic framework using deep-eutectic solvents.

Project description:The exfoliation of bulk two-dimensional metal-organic framework (MOF) into few-layered nanosheets has attracted much attention recently. In this work, an environmental-friendly route has been developed for layered-MOF (MAMS-1) delamination using deep eutectic solvent (DES), which is more sustainable and efficient alternative than conventional organic solvents for MOF nanosheet preparation. Under sonication condition, DES as solvents, the highest exfoliation rate of MAMS-1 is up to 70% with two host layers via poly(vinylpyrrolidone) (PVP) surfactant-assisted method. The presence of tert-butyl exteriors and the atomically thickness endow the MOF nanosheets stable suspension for at least one month. Due to the 2D structure and excellent stability, MAMS-1 nanosheet (MAMS-1-NS) was chosen as a good candidate to encapsulate Eu3+ cations. The obtained Eu3+@MAMS-1-NS acts as a multi-responsive luminescent sensor through fluorescence quenching, and can specifically recognize Fe3+ (LOD = 0.40 μM, KSV = 1.05 × 105 M-l), Hg2+ (LOD = 0.038 μM, KSV = 5.78 × 106 M-l), Cr2O72- (LOD = 0.33 μM, KSV = 1.55 × 105 M-l) and MnO4- (LOD = 0.088 μM, KSV = 4.49 × 105 M-l). Compared with bulk Eu3+@MAMS-1, the sensitivity of Eu3+@MAMS-1-NS is greatly improved owing to its ultrathin nanosheet morphology and highly accessible active sites on the surface.

| S-EPMC7838717 | biostudies-literature

Exposure of zebrafish embryos to organic solvents, dimethylformamide and dimethyl sulfoxide

Project description:Current aquatic chemical testing guidelines recognise that solvents can potentially interfere with the organism or environmental conditions of aquatic ecotoxicity tests and therefore recommend concentration limits for their use. These recommendations are based on evidence of adverse solvent effects in apical level tests. The growing importance of sub-apical and chronic endpoints in future test strategies, however, suggests the limits may need re-assessment. To address this concern, microarrays were used to determine the effects of organic solvents, dimethylformamide (DMF) and dimethyl sulfoxide (DMSO), upon the transcriptome of zebrafish (Danio rerio) embryos. Embryos were exposed for 48 h to 0.025 and 0.1 ml/L DMF or DMSO. Effects on survival and development after 24 and 48 h were assessed microscopically with no effects on mortality or morphology. However, analysis of 48-h embryonic RNA revealed large numbers of differentially expressed genes for both solvent at both concentrations. The enrichment of differentially expressed genes was found for metabolic, development and other key biological processes, some of which could be linked to observed morphological effects at higher solvent concentrations. These findings emphasise the need to remove or lower as far as possible, the concentrations of solvent carriers in ecotoxicology tests.

2011-10-06 | GSE32593 | GEO

Synthesis of organic liquid crystals containing selectively fluorinated cyclopropanes.

Project description:This paper describes the synthesis of a series of organic liquid crystals (LCs) containing selectively fluorinated cyclopropanes at their termini. The syntheses used difluorocarbene additions to olefin precursors, an approach which proved straightforward such that these liquid crystal candidates could be efficiently prepared. Their physical and thermodynamic properties were evaluated and depending on individual structures, they either displayed positive or negative dielectric anisotropy. The study gives some guidance into effective structure-property relationships for the design of LCs containing selectively fluorinated cyclopropane motifs.

| S-EPMC7176930 | biostudies-literature

Quantifying the Stability of the Hydronium Ion in Organic Solvents With Molecular Dynamics Simulations.

Project description:The solution-phase stability of the hydronium ion catalyst significantly affects the rates of acid-catalyzed reactions, which are ubiquitously utilized to convert biomass to valuable chemicals. In this work, classical molecular dynamics simulations were performed to quantify the stability of hydronium and chloride ions by measuring their solvation free energies in water, 1,4-dioxane (DIOX), tetrahydrofuran (THF), γ-valerolactone (GVL), N-methyl-2-pyrrolidone (NMP), acetone (ACE), and dimethyl sulfoxide (DMSO). By measuring the free energy for transferring a hydronium ion from pure water to pure organic solvent, we found that the hydronium ion is destabilized in DIOX, THF, and GVL and stabilized in NMP, ACE, and DMSO relative to water. The distinction between these organic solvents can be used to predict the preference of the hydronium ion for specific regions in aqueous mixtures of organic solvents. We then incorporated the stability of the hydronium ion into a correlative model for the acid-catalyzed conversion of 1,2-propanediol to propanal. The revised model is able to predict experimental reaction rates across solvent systems with different organic solvents. These results demonstrate the ability of classical molecular dynamics simulations to screen solvent systems for improved acid-catalyzed reaction performance.

| S-EPMC6594219 | biostudies-literature

Enhancing the Liquid-Phase Exfoliation of Graphene in Organic Solvents upon Addition of n-Octylbenzene.

Project description:Due to a unique combination of electrical and thermal conductivity, mechanical stiffness, strength and elasticity, graphene became a rising star on the horizon of materials science. This two-dimensional material has found applications in many areas of science ranging from electronics to composites. Making use of different approaches, unfunctionalized and non-oxidized graphene sheets can be produced; among them an inexpensive and scalable method based on liquid-phase exfoliation of graphite (LPE) holds potential for applications in opto-electronics and nanocomposites. Here we have used n-octylbenzene molecules as graphene dispersion-stabilizing agents during the graphite LPE process. We have demonstrated that by tuning the ratio between organic solvents such as N-methyl-2-pyrrolidinone or ortho-dichlorobenzene, and n-octylbenzene molecules, the concentration of exfoliated graphene can be enhanced by 230% as a result of the high affinity of the latter molecules for the basal plane of graphene. The LPE processed graphene dispersions were further deposited onto solid substrates by exploiting a new deposition technique called spin-controlled drop casting, which was shown to produce uniform highly conductive and transparent graphene films.

| S-EPMC4648096 | biostudies-literature

Surface Tension of Liquid Organic Acids: An Artificial Neural Network Model.

Project description:An artificial neural network model is proposed for the surface tension of liquid organic fatty acids covering a wide temperature range. A set of 2051 data collected for 98 acids (including carboxylic, aliphatic, and polyfunctional) was considered for the training, testing, and prediction of the resulting network model. Different architectures were explored, with the final choice giving the best results, in which the input layer has the reduced temperature (temperature divided by the critical point temperature), boiling temperature, and acentric factor as an independent variable, a 41-neuron hidden layer, and an output layer consisting of one neuron. The overall absolute percentage deviation is 1.33%, and the maximum percentage deviation is 14.53%. These results constitute a major improvement over the accuracy obtained using corresponding-states correlations from the literature.

| S-EPMC7998689 | biostudies-literature

Exposure of zebrafish embryos to organic solvents, dimethylformamide and dimethyl sulfoxide

2011-10-05 | E-GEOD-32593 | biostudies-arrayexpress

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data