Site-directed mutations in fungal laccase: effect on redox potential, activity and pH profile.
Ontology highlight
ABSTRACT:
SUBMITTER: Xu F
PROVIDER: S-EPMC1219662 | biostudies-other | 1998 Aug
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Engineering of fungal laccases with optimum catalytic activity at alkaline pH has been a long-lasting challenge. In this study, a mutant library containing 3000 clones was obtained by error-prone PCR to adapt the optimum pH of a fungal laccase Lcc9 from the basidiomycete Coprinopsis cinerea. After three rounds of functional screening, a mutant with three amino acid changes (E116K, N229D, I393T) named PIE5 was selected. PIE5 showed an optimum pH of 8.5 and 8.0 against guaiacol and 2,6-DMP when expressed in Pichia pastoris, representing the first fungal laccase that possesses an optimum pH at an alkaline condition. Site directed mutagenesis disclosed that N229D contributed the most to the optimum pH increment. A single N229D mutation caused an increase in optimum pH by 1.5 units. When used in indigo dye decolorization, PIE5 efficiently decolorized 87.1 ± 1.1% and 90.9 ± 0.3% indigo dye at the optimum conditions of pH 7.0-7.5 and 60 °C, and with either methyl 3,5-dimethoxy-4-hydroxybenzoate or 2,2'-azino-bis(3-ethylbenzothazoline-6-sulfonate) as the mediator. In comparison, the commercially available fungal laccase TvLac from Trametes villosa decolorized 84.3 ± 1.8% of indigo dye under its optimum conditions (opt. pH 5.0 and 60 °C). The properties of an alkaline-dependent activity and the high indigo dye decolorization ability (1.3-fold better than the parental Lcc9) make the new fungal laccase PIE5 an alternative for specific industrial applications.
| S-EPMC6751238 | biostudies-literature
Project description:Fungal high redox potential laccases are proposed as cathodic biocatalysts in implantable enzymatic fuel cells to generate high cell voltages. Their application is limited mainly through their acidic pH optimum and chloride inhibition. This work investigates evolutionary and engineering strategies to increase the pH optimum of a chloride-tolerant, high redox potential laccase from the ascomycete Botrytis aclada. The laccase was subjected to two rounds of directed evolution and the clones screened for increased stability and activity at pH 6.5. Beneficial mutation sites were investigated by semi-rational and combinatorial mutagenesis. Fourteen variants were characterised in detail to evaluate changes of the kinetic constants. Mutations increasing thermostability were distributed over the entire structure. Among them, T383I showed a 2.6-fold increased half-life by preventing the loss of the T2 copper through unfolding of a loop. Mutations affecting the pH-dependence cluster around the T1 copper and categorise in three types of altered pH profiles: pH-type I changes the monotonic decreasing pH profile into a bell-shaped profile, pH-type II describes increased specific activity below pH 6.5, and pH-type III increased specific activity above pH 6.5. Specific activities of the best variants were up to 5-fold higher (13 U mg-1) than BaL WT at pH 7.5.
| S-EPMC5651918 | biostudies-literature
Project description:Relatively high concentrations of micropollutants in municipal wastewater treatment plant (WWTP) effluents underscore the necessity to develop additional treatment steps prior to discharge of treated wastewater. Microorganisms that produce unspecific oxidative enzymes such as laccases are a potential means to improve biodegradation of these compounds. Four strains of the bacterial genus Streptomyces (S. cyaneus, S. ipomoea, S. griseus and S. psammoticus) and the white-rot fungus Trametes versicolor were studied for their ability to produce active extracellular laccase in biologically treated wastewater with different carbon sources. Among the Streptomyces strains evaluated, only S. cyaneus produced extracellular laccase with sufficient activity to envisage its potential use in WWTPs. Laccase activity produced by T. versicolor was more than 20 times greater, the highest activity being observed with ash branches as the sole carbon source. The laccase preparation of S. cyaneus (abbreviated LSc) and commercial laccase from T. versicolor (LTv) were further compared in terms of their activity at different pH and temperatures, their stability, their substrate range, and their micropollutant oxidation efficiency. LSc and LTv showed highest activities under acidic conditions (around pH 3 to 5), but LTv was active over wider pH and temperature ranges than LSc, especially at near-neutral pH and between 10 and 25°C (typical conditions found in WWTPs). LTv was also less affected by pH inactivation. Both laccase preparations oxidized the three micropollutants tested, bisphenol A, diclofenac and mefenamic acid, with faster degradation kinetics observed for LTv. Overall, T. versicolor appeared to be the better candidate to remove micropollutants from wastewater in a dedicated post-treatment step.
| S-EPMC3819643 | biostudies-literature
Project description:Among the broad repertory of protein engineering methods that set out to improve stability, consensus design has proved to be a powerful strategy to stabilize enzymes without compromising their catalytic activity. Here, we have applied an in-house consensus method to stabilize a laboratory evolved high-redox potential laccase. Multiple sequence alignments were carried out and computationally refined by applying relative entropy and mutual information thresholds. Through this approach, an ensemble of 20 consensus mutations were identified, 18 of which were consensus/ancestral mutations. The set of consensus variants was produced in Saccharomyces cerevisiae and analyzed individually, while site directed recombination of the best mutations did not produce positive epistasis. The best single variant carried the consensus-ancestral A240G mutation in the neighborhood of the T2/T3 copper cluster, which dramatically improved thermostability, kinetic parameters and secretion.
| S-EPMC7218104 | biostudies-literature
Project description:Cytochrome-c-peroxidase (CCP) contains a five-coordinate heme active site. The reduction potential for the ferric to ferrous couple in CCP is anomalously low and pH dependent (Eo = ~-180 mV vs. S.H.E. at pH 7). The contribution of the protein environment to the tuning of the redox potential of this couple is evaluated using site directed mutants of several amino acid residues in the environment of the heme. These include proximal pocket mutation to residues Asp-235, Trp-191, Phe-202 and His-175, distal pocket mutation to residues Trp-51, His-52, and Arg-48; and a heme edge mutation to Ala-147. Where unknown, the structural changes resulting from the amino acid substitution have been studied by X-ray crystallography. In most cases, ostensibly polar or charged residues are replaced by large hydrophobic groups or alternatively by Ala or Gly. These latter have been shown to generate large, solvent filled cavities. Reduction potentials are measured as a function of pH by spectroelectrochemistry. Starting with the X-ray derived structures of CCP and the mutants, or with predicted structures generated by Molecular Dynamics (MD), predictions of redox potential changes are modeled using the Protein Dipoles Langevin Dipoles (PDLD) method. These calculations serve to model an electrostatic assessment of the redox potential change with simplified assumptions about heme iron chemistry, with the balance of the experimentally observed shifts in redox potential being thence attributed to changes in the ligand set and heme coordination chemistry, and/or other changes in the structure not directly evident in the X-ray structures (e.g. ionization states, specific roles played by solvent species, or conformationally flexible portions of the protein). Agreement between theory and experiment is good for all mutant proteins with the exception of the mutation Arg 48 to Ala, and His 52 to Ala. In the former case, the influence of phosphate buffer is adduced to account for the discrepancy, and measurements made in a bis-tris propane/2-(N-morpholino)ethanesulfonic acid buffer system agree well with theory. For the latter case, an unknown structural element relevant to His-52, and/or solvent influence in the mutant akin to anion binding in the distal pocket (though lacking proof that it is) manifests in this mutant. The use of exogenous (sixth) ligands in dissecting the contributions to control of redox potential are also explored as a pathway for model building.
| S-EPMC3596509 | biostudies-literature
Project description:Laccases are members of a large family of multicopper oxidases that catalyze the oxidation of a wide range of organic and inorganic substrates accompanied by the reduction of dioxygen to water. These enzymes contain four Cu atoms per molecule organized into three sites: T1, T2 and T3. In all laccases, the T1 copper ion is coordinated by two histidines and one cysteine in the equatorial plane and is covered by the side chains of hydrophobic residues in the axial positions. The redox potential of the T1 copper ion influences the enzymatic reaction and is determined by the nature of the axial ligands and the structure of the second coordination sphere. In this work, the laccase from the ascomycete Botrytis aclada was studied, which contains conserved Ile491 and nonconserved Leu499 residues in the axial positions. The three-dimensional structures of the wild-type enzyme and the L499M mutant were determined by X-ray crystallography at 1.7 Å resolution. Crystals suitable for X-ray analysis could only be grown after deglycosylation. Both structures did not contain the T2 copper ion. The catalytic properties of the enzyme were characterized and the redox potentials of both enzyme forms were determined: E0 = 720 and 580 mV for the wild-type enzyme and the mutant, respectively. Since the structures of the wild-type and mutant forms are very similar, the change in the redox potential can be related to the L499M mutation in the T1 site of the enzyme.
| S-EPMC4220974 | biostudies-literature
Project description:Laccase production by Pycnoporus sanguineus RP15 grown in wheat bran and corncob under solid-state fermentation was optimized by response surface methodology using a Central Composite Rotational Design. A laccase (Lacps1) was purified and characterized and the potential of the pure Lacps1 and the crude culture extract for synthetic dye decolorization was evaluated. At optimal conditions (eight days, 26 °C, 18% (w/w) milled corncob, 0.8% (w/w) NH₄Cl and 50 mmol·L(-1) CuSO₄, initial moisture 4.1 mL·g(-1)), the laccase activity reached 138.6 ± 13.2 U·g(-1). Lacps1 was a monomeric glycoprotein (67 kDa, 24% carbohydrate). Optimum pH and temperature for the oxidation of 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonate) (ABTS) were 4.4 and 74.4 °C, respectively. Lacps1 was stable at pH 3.0-8.0, and after two hours at 55-60 °C, presenting high redox potential (0.747 V vs. NHE). ABTS was oxidized with an apparent affinity constant of 147.0 ± 6.4 μmol·L(-1), maximum velocity of 413.4 ± 21.2 U·mg(-1) and catalytic efficiency of 3140.1 ± 149.6 L·mmol(-1)·s(-1). The maximum decolorization percentages of bromophenol blue (BPB), remazol brilliant blue R and reactive blue 4 (RB4), at 25 or 40 °C without redox mediators, reached 90%, 80% and 60%, respectively, using either pure Lacps1 or the crude extract. This is the first study of the decolorization of BPB and RB4 by a P. sanguineus laccase. The data suggested good potential for treatment of industrial dye-containing effluents.
| S-EPMC4881498 | biostudies-literature
Project description:Laccase production by a temperature and pH tolerant fungal strain (GBPI-CDF-03) isolated from a glacial site in Indian Himalayan Region (IHR) has been investigated. The fungus developed white cottony mass on potato dextrose agar and revealed thread-like mycelium under microscope. ITS region analysis of fungus showed its 100% similarity with Trametes hirsuta. The fungus tolerated temperature from 4 to 48°C ± 2 (25°C opt.) and pH 3-13 (5-7 opt.). Molecular weight of laccase was determined approximately 45 kDa by native PAGE. Amplification of laccase gene fragment (corresponding to the copper-binding conserved domain) contained 200 bp. The optimum pH for laccase production, at optimum growth temperature, was determined between 5.5 and 7.5. In optimization experiments, fructose and ammonium sulfate were found to be the best carbon and nitrogen sources, respectively, for enhancing the laccase production. Production of laccase was favored by high carbon/nitrogen ratio. Addition of CuSO4 (up to 1.0 mM) induced laccase production up to 2-fold, in case of 0.4 mM concentration. Addition of organic solvents also induced the production of laccase; acetone showed the highest (2-fold) induction. The study has implications in bioprospecting of ecologically resilient microbial strains.
| S-EPMC3655567 | biostudies-literature
Project description:Although copper is quantitatively removed from fungal laccase (Polyporus versicolor) by extended dialysis against high concentrations of cyanide, we have been unable to reconstitute the protein by addition of Cu(I) ions. However, two new methods for reversibly removing the type 2 Cu centre have been developed. The visible absorption at 610 nm, which is attributable to type 1 Cu, is unaffected by the procedure, but the absorbance of the type 3 Cu at 330 nm is decreased by 60 +/- 10%. The decrease is due, at least in part, to partial reduction of the binuclear type 3 centre, although there may be some change in the molar absorptivity of the oxidized chromophore as well. The change in the c.d. spectrum that occurs at approx. 350 nm may be explained in the same way, but it may also reflect the loss of a signal due to the type 2 Cu. Upon removal of the type 2 Cu an absorbance increase appears at approx. 435 nm, and it is assigned to the semi-reduced form of the type 3 pair. In the e.p.r. spectrum of the type 2-depleted enzyme the type 1 Cu signal exhibits well-resolved ligand hyperfine splitting, which can be simulated on the basis of contributions from two N and two H nuclei (AH congruent to AN congruent to 25 MHz). The H atoms are assumed to be attached to the beta-carbon of the covalently bonded cysteine ligand. A signal from a semi-reduced form(s) of the type 3 site can also be resolved in the spectrum of the type 2-depleted enzyme, and on the basis of the second integral of the e.p.r. spectrum 40% of the type 3 pairs are believed to be in a partially reduced state. The semi-reduced type 3 site is remarkably stable and is not readily oxidized by H2O2 or IrCl6(2-) or reduced by Fe(CN)6(4-). Intramolecular electron transfer is apparently quite slow in at least some forms of the type 2-depleted enzyme, and this may explain why the activity is at best 5% of that of the native enzyme. Full activity returns when type 2 copper is restored.
| S-EPMC1149334 | biostudies-other
Project description:BackgroundLaccases have huge potential for biotechnological applications due to their broad substrate spectrum and wide range of reactions they are able to catalyze. These include, for example, the formation and degradation of dimers, oligomers, polymers, and ring cleavage as well as oxidation of aromatic compounds. Potential applications of laccases include detoxification of industrial effluents, decolorization of textile dyes and the synthesis of natural products by, for instance, dimerization of phenolic acids. We have recently published a report on the cloning and characterization of a CotA Bacillus licheniformis laccase, an enzyme that catalyzes dimerization of phenolic acids. However, the broad application of this laccase is limited by its low expression level of 26 mg l-1 that was achieved in Escherichia coli. To counteract this shortcoming, random and site-directed mutagenesis have been combined in order to improve functional expression and activity of CotA.ResultsA CotA double mutant, K316N/D500G, was constructed by combining random and site-directed mutagenesis. It can be functionally expressed at an 11.4-fold higher level than the wild-type enzyme. In addition, it is able to convert ferulic acid much faster than the wild-type enzyme (21% vs. 14%) and is far more efficient in decolorizing a range of industrial dyes. The investigation of the effects of the mutations K316N and D500G showed that amino acid at position 316 had a major influence on enzyme activity and position 500 had a major influence on the expression of the laccase.ConclusionThe constructed double mutant K316N/D500G of the Bacillus licheniformis CotA laccase is an appropriate candidate for biotechnological applications due to its high expression level and high activity in dimerization of phenolic acids and decolorization of industrial dyes.
| S-EPMC2653023 | biostudies-literature