Musculoskeletal imaging update: current applications of advanced imaging techniques to evaluate the early and long-term complications of patients with orthopedic implants.
Ontology highlight
ABSTRACT:
SUBMITTER: Sofka CM
PROVIDER: S-EPMC2504118 | biostudies-other | 2006 Feb
REPOSITORIES: biostudies-other
Similar Datasets
Project description:OBJECTIVE. For many years, MRI of the musculoskeletal system has relied mostly on conventional sequences with qualitative analysis. More recently, using quantitative MRI applications to complement qualitative imaging has gained increasing interest in the MRI community, providing more detailed physiologic or anatomic information. CONCLUSION. In this article, we review the current state of quantitative MRI, technical and software advances, and the most relevant clinical and research musculoskeletal applications of quantitative MRI.
| S-EPMC6706325 | biostudies-literature
Project description:ObjectiveWith improvements in PET/CT and PET/MRI over the last decade, as well as increased understanding of the pathophysiology of musculoskeletal diseases, there is an emerging potential for PET as a primary or complementary modality in the management of rheumatologic and orthopedic conditions.ConclusionWe discuss the role of PET/CT and PET/MRI in nononcologic musculoskeletal disorders, including inflammatory and infectious conditions and postoperative complications. There is great potential for an increased role for PET to serve as a primary or complementary modality in the management of orthopedic and rheumatologic disorders.
| S-EPMC7469956 | biostudies-literature
Project description:BACKGROUND:High failure rates of metal-on-metal (MoM) hip implants prompted regulatory authorities to issue worldwide safety alerts. Circulating cobalt from these implants causes rare but fatal autopsy-diagnosed cardiotoxicity. There is concern that milder cardiotoxicity may be common and underrecognized. Although blood metal ion levels are easily measured and can be used to track local toxicity, there are no noninvasive tests for organ deposition. We sought to detect correlation between blood metal ions and a comprehensive panel of established markers of early cardiotoxicity. METHODS:Ninety patients were recruited into this prospective single-center blinded study. Patients were divided into 3 age and sex-matched groups according to implant type and whole-blood metal ion levels. Group-A patients had a ceramic-on-ceramic [CoC] bearing; Group B, an MoM bearing and low blood metal ion levels; and Group C, an MoM bearing and high blood metal-ion levels. All patients underwent detailed cardiovascular phenotyping using cardiac magnetic resonance imaging (CMR) with T2*, T1, and extracellular volume mapping; echocardiography; and cardiac blood biomarker sampling. T2* is a novel CMR biomarker of tissue metal loading. RESULTS:Blood cobalt levels differed significantly among groups A, B, and C (mean and standard deviation [SD], 0.17 ± 0.08, 2.47 ± 1.81, and 30.0 ± 29.1 ppb, respectively) and between group A and groups B and C combined. No significant between-group differences were found in the left atrial or ventricle size, ejection fraction (on CMR or echocardiography), T1 or T2* values, extracellular volume, B-type natriuretic peptide level, or troponin level, and all values were within normal ranges. There was no relationship between cobalt levels and ejection fraction (R = 0.022, 95% confidence interval [CI] = -0.185 to 0.229) or T2* values (R = 0.108, 95% CI = -0.105 to 0.312). CONCLUSIONS:Using the best available technologies, we did not find that high (but not extreme) blood cobalt and chromium levels had any significant cardiotoxic effect on patients with an MoM hip implant. There were negligible-to-weak correlations between elevated blood metal ion levels and ejection fraction even at the extremes of the 95% CI, which excludes any clinically important association. LEVEL OF EVIDENCE:Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.
| S-EPMC6948834 | biostudies-literature
Project description:Ultrasound has become a useful tool in the workup of pediatric patients because of the highly convenient, cost-effective, and safe nature of the examination. With rapid advancements in anatomic and functional ultrasound techniques over the recent years, the diagnostic and interventional utility of ultrasound has risen tremendously. Advanced ultrasound techniques constitute a suite of new technologies that employ microbubbles to provide contrast and enhance flow visualization, elastography to measure tissue stiffness, ultrafast Doppler to deliver high spatiotemporal resolution of flow, three- and four-dimensional technique to generate accurate spatiotemporal representation of anatomy, and high-frequency imaging to delineate anatomic structures at a resolution down to 30 ?m. Application of these techniques can enhance the diagnosis of organ injury, viable tumor, and vascular pathologies at bedside. This has significant clinical implications in pediatric patients who are not easy candidates for lengthy MRI or radiation-requiring examination, and are also in need of a highly sensitive bedside technique for therapeutic guidance. To best use the currently available, advanced ultrasound techniques for pediatric patients, it is necessary to understand the diagnostic utility of each technique. In this review, we will educate the readers of emerging ultrasound techniques and their respective clinical applications.
| S-EPMC6398363 | biostudies-literature
Project description:3D imaging is a technique which develops or creates the impression of depth within an image by deploying 2D data into 3-dimensional format. To aid in quality regulating processes for industrial purposes, 3D imaging has become an extremely valuable factor. Owing to their various drawbacks, a wide range of investigative methods formulated for demonstration of facial structures and the dentition were dilapidated. Currently in medicine, the most prevalent method is perhaps 3D imaging technique renders thorough and problem specific information regarding hard and the soft tissues, such as Computerized Tomography (CT), Cone Beam Computerized Tomography (CBCT), Micro Computerized Tomography (MCT), 3D laser scanning, structured light technique, stereophotogrammetry or 3D surface imaging systems (3dMD), 3D facial morphometry (3DFM), Tuned Aperture Computed Tomography (TACT), and Magnetic Resonance Imaging (MRI). 3D imaging techniques in orthodontics plays an important role by facilitating more elaborated diagnostic information on the precise cases like patients having craniofacial anomalies. Hence, the aim of this study was to review advances in 3D imaging with in the field of orthodontics.
| S-EPMC7491840 | biostudies-literature
Project description:The accuracy of target delineation in radiation treatment (RT) planning of cerebral gliomas is crucial to achieve high tumor control, while minimizing treatment-related toxicity. Conventional magnetic resonance imaging (MRI), including contrast-enhanced T1-weighted and fluid-attenuated inversion recovery (FLAIR) sequences, represents the current standard imaging modality for target volume delineation of gliomas. However, conventional sequences have limited capability to discriminate treatment-related changes from viable tumors, owing to the low specificity of increased blood-brain barrier permeability and peritumoral edema. Advanced physiology-based MRI techniques, such as MR spectroscopy, diffusion MRI and perfusion MRI, have been developed for the biological characterization of gliomas and may circumvent these limitations, providing additional metabolic, structural, and hemodynamic information for treatment planning and monitoring. Radionuclide imaging techniques, such as positron emission tomography (PET) with amino acid radiopharmaceuticals, are also increasingly used in the workup of primary brain tumors, and their integration in RT planning is being evaluated in specialized centers. This review focuses on the basic principles and clinical results of advanced MRI and PET imaging techniques that have promise as a complement to RT planning of gliomas.
| S-EPMC7959155 | biostudies-literature
Project description:Bacterial infection and infection-induced immune response have been a life-threatening risk for patients having orthopedic implant surgeries. Conventional biomaterials are vulnerable to biocontamination, which causes bacterial invasion in wounded areas, leading to postoperative infection. Therefore, development of anti-infection and immune-evasive coating for orthopedic implants is urgently needed. Here, we developed an advanced surface modification technique for orthopedic implants termed lubricated orthopedic implant surface (LOIS), which was inspired by slippery surface of Nepenthes pitcher plant. LOIS presents a long-lasting, extreme liquid repellency against diverse liquids and biosubstances including cells, proteins, calcium, and bacteria. In addition, we confirmed mechanical durability against scratches and fixation force by simulating inevitable damages during surgical procedure ex vivo. The antibiofouling and anti-infection capability of LOIS were thoroughly investigated using an osteomyelitis femoral fracture model of rabbits. We envision that the LOIS with antibiofouling properties and mechanical durability is a step forward in infection-free orthopedic surgeries.
| S-EPMC7608784 | biostudies-literature
Project description:Orthopedic implant failure due to aseptic loosening and mechanical instability remains a major problem in total joint replacement. Improving osseointegration at the bone-implant interface may reduce micromotion and loosening. Bone sialoprotein (BSP) has been shown to enhance bone formation when coated onto titanium femoral implants and in rat calvarial defect models. However, the most appropriate method of BSP coating, the necessary level of BSP coating, and the effect of BSP coating on cell behavior remain largely unknown. In this study, BSP was covalently coupled to titanium surfaces via an aminosilane linker (APTES), and its properties were compared to BSP applied to titanium via physisorption and untreated titanium. Cell functions were examined using primary human osteoblasts (hOBs) and L929 mouse fibroblasts. Gene expression of specific bone turnover markers at the RNA level was detected at different intervals. Cell adhesion to titanium surfaces treated with BSP via physisorption was not significantly different from that of untreated titanium at any time point, whereas BSP application via covalent coupling caused reduced cell adhesion during the first few hours in culture. Cell migration was increased on titanium disks that were treated with higher concentrations of BSP solution, independent of the coating method. During the early phases of hOB proliferation, a suppressive effect of BSP was observed independent of its concentration, particularly when BSP was applied to the titanium surface via physisorption. Although alkaline phosphatase activity was reduced in the BSP-coated titanium groups after 4 days in culture, increased calcium deposition was observed after 21 days. In particular, the gene expression level of RUNX2 was upregulated by BSP. The increase in calcium deposition and the stimulation of cell differentiation induced by BSP highlight its potential as a surface modifier that could enhance the osseointegration of orthopedic implants. Both physisorption and covalent coupling of BSP are similarly effective, feasible methods, although a higher BSP concentration is recommended.
| S-EPMC4844107 | biostudies-literature
Project description:ObjectivesTemporal and global changes in research utilising imaging to assess foot osteoarthritis is currently unknown. This study aimed to undertake a bibliometric analysis of published research to: (1) identify the imaging modalities that have been used to evaluate foot osteoarthritis; (2) explore the temporal changes and global differences in the use of these imaging modalities; and (3) to evaluate performance related to publication- and citation-based metrics.MethodsA literature search was conducted using Scopus to identify studies which had used imaging to assess foot osteoarthritis. Extracted data included publication year, imaging modality, citations, affiliations, and author collaboration networks. Temporal trends in the use of each imaging modality were analysed. Performance analysis and science mapping were used to analyse citations and collaboration networks.Results158 studies were identified between 1980 and 2021. Plain radiography was the most widely used modality, followed by computed tomography, magnetic resonance imaging (MRI) and ultrasound imaging (USI), respectively. The number of published studies increased over time for each imaging modality (all P ≥ 0.018). The most productive country was the United States of America (USA), followed by the United Kingdom and Australia. International authorship collaboration was evident in 57 (36.1%) studies. The average citation rate was 23.4 per study, with an average annual citation rate of 2.1.ConclusionsPublished research employing imaging to assess foot osteoarthritis has increased substantially over the past four decades. Although plain radiography remains the gold standard modality, the emergence of MRI and USI in the past two decades continues to advance knowledge and progress research in this field.
| S-EPMC9121542 | biostudies-literature
Project description:Coronavirus disease 2019 (COVID-19), which started out as an outbreak of pneumonia, has now turned into a pandemic due to its rapid transmission. Besides developing a vaccine, rapid, accurate, and cost-effective diagnosis is essential for monitoring and combating the spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its related variants on time with precision and accuracy. Currently, the gold standard for detection of SARS-CoV-2 is Reverse Transcription Polymerase Chain Reaction (RT-PCR), but it lacks accuracy, is time-consuming and cumbersome, and fails to detect multi-variant forms of the virus. Herein, we have summarized conventional diagnostic methods such as Chest-CT (Computed Tomography), RT-PCR, Loop Mediated Isothermal Amplification (LAMP), Reverse Transcription-LAMP (RT-LAMP), as well new modern diagnostics such as CRISPR-Cas-based assays, Surface Enhanced Raman Spectroscopy (SERS), Lateral Flow Assays (LFA), Graphene-Field Effect Transistor (GraFET), electrochemical sensors, immunosensors, antisense oligonucleotides (ASOs)-based assays, and microarrays for SARS-CoV-2 detection. This review will also provide an insight into an ongoing research and the possibility of developing more economical tools to tackle the COVID-19 pandemic.
| S-EPMC8712736 | biostudies-literature