Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

X-ray absorption spectroscopy as a probe of microbial sulfur biochemistry: the nature of bacterial sulfur globules revisited.

ABSTRACT: The chemical nature of the sulfur in bacterial sulfur globules has been the subject of controversy for a number of years. Sulfur K-edge X-ray absorption spectroscopy (XAS) is a powerful technique for probing the chemical forms of sulfur in situ, but two groups have used it with very different conclusions. The root of the controversy lies with the different detection strategies used by the two groups, which result in very different spectra. This paper seeks to resolve the controversy. We experimentally demonstrate that the use of transmittance detection for sulfur K-edge XAS measurements is highly prone to spectroscopic distortions and that much of the published work on sulfur bacteria is very likely based on distorted data. We also demonstrate that all three detection methods used for X-ray absorption experiments yield essentially identical spectra when the measurements are carried out under conditions where no experimental distortions are expected. Finally, we turn to the original question--the chemical nature of bacterial sulfur. We examine isolated sulfur globules of Allochromatium vinosum and intact cells of a strain of magnetotactic coccus and show that XAS indicates the presence of a chemical form of sulfur resembling S(8).

SUBMITTER: George GN

PROVIDER: S-EPMC2566007 | biostudies-other | 2008 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Simulated sulfur K-edge X-ray absorption spectroscopy database of lithium thiophosphate solid electrolytes.

Project description:X-ray absorption spectroscopy (XAS) is a premier technique for materials characterization, providing key information about the local chemical environment of the absorber atom. In this work, we develop a database of sulfur K-edge XAS spectra of crystalline and amorphous lithium thiophosphate materials based on the atomic structures reported in Chem. Mater., 34, 6702 (2022). The XAS database is based on simulations using the excited electron and core-hole pseudopotential approach implemented in the Vienna Ab initio Simulation Package. Our database contains 2681 S K-edge XAS spectra for 66 crystalline and glassy structure models, making it the largest collection of first-principles computational XAS spectra for glass/ceramic lithium thiophosphates to date. This database can be used to correlate S spectral features with distinct S species based on their local coordination and short-range ordering in sulfide-based solid electrolytes. The data is openly distributed via the Materials Cloud, allowing researchers to access it for free and use it for further analysis, such as spectral fingerprinting, matching with experiments, and developing machine learning models.

| S-EPMC10238544 | biostudies-literature

Sulfur K-edge X-ray absorption spectroscopy as a probe of ligand-metal bond covalency: metal vs ligand oxidation in copper and nickel dithiolene complexes.

Project description:A combination of Cu L-edge and S K-edge X-ray absorption data and density functional theory (DFT) calculations has been correlated with 33S electron paramagnetic resonance superhyperfine results to obtain the dipole integral (Is) for the S 1s-->3p transition for the dithiolene ligand maleonitriledithiolate (MNT) in (TBA)2[Cu(MNT)2] (TBA= tetra-n-butylammonium). The results have been combined with the Is of sulfide derived from XPS studies to experimentally obtain a relation between the S 1s-->4p transition energy (which reflects the charge on the S atom, QSmol) and the dipole integral over a large range of QSmol. The results show that, for high charges on S, Is can vary from the previously reported Is values, calculated using data over a limited range of QSmol. A combination of S K-edge and Cu K- and L-edge X-ray absorption data and DFT calculations has been used to investigate the one-electron oxidation of [Cu(MNT)2]2- and [Ni(MNT)2]2-. The conversion of [Cu(MNT)2]2- to [Cu(MNT)2]- results in a large change in the charge on the Cu atom in the molecule (QCumol) and is consistent with a metal-based oxidation. This is accompanied by extensive charge donation from the ligands to compensate the high charge on the Cu in [Cu(MNT)2]- based on the increased S K-edge and decreased Cu L-edge intensity, respectively. In contrast, the oxidation of [Ni(MNT)2]2- to [Ni(MNT)2]- results in a small change in QNimol, indicating a ligand-based oxidation consistent with oxidation of a molecular orbital, psiSOMO (singly occupied molecular orbital), with predominant ligand character.

| S-EPMC2880206 | biostudies-literature

The x-ray absorption spectroscopy model of solvation about sulfur in aqueous L-cysteine.

Project description:The environment of sulfur in dissolved aqueous L-cysteine has been examined using K-edge x-ray absorption spectroscopy (XAS), extended continuum multiple scattering (ECMS) theory, and density functional theory (DFT). For the first time, bound-state and continuum transitions representing the entire XAS spectrum of L-cysteine sulfur are accurately reproduced by theory. Sulfur K-edge absorption features at 2473.3 eV and 2474.2 eV represent transitions to LUMOs that are mixtures of S-C and S-H σ∗ orbitals significantly delocalized over the entire L-cysteine molecule. Continuum features at 2479, 2489, and 2530 eV were successfully reproduced using extended continuum theory. The full L-cysteine sulfur K-edge XAS spectrum could not be reproduced without addition of a water-sulfur hydrogen bond. Density functional theory analysis shows that although the Cys(H)S⋯H-OH hydrogen bond is weak (∼2 kcal) the atomic charge on sulfur is significantly affected by this water. MXAN analysis of hydrogen-bonding structures for L-cysteine and water yielded a best fit model featuring a tandem of two water molecules, 2.9 Å and 5.8 Å from sulfur. The model included a S(cys)⋯H-O(w1)H hydrogen-bond of 2.19 Å and of 2.16 Å for H(2)O(w1)⋯H-O(w2)H. One hydrogen-bonding water-sulfur interaction alone was insufficient to fully describe the continuum XAS spectrum. However, density functional theoretical results are convincing that the water-sulfur interaction is weak and should be only transient in water solution. The durable water-sulfur hydrogen bond in aqueous L-cysteine reported here therefore represents a break with theoretical studies indicating its absence. Reconciling the apparent disparity between theory and result remains the continuing challenge.

| S-EPMC3526153 | biostudies-other

X-ray absorption spectroscopy.

Project description:This review gives a brief description of the theory and application of X-ray absorption spectroscopy, both X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), especially, pertaining to photosynthesis. The advantages and limitations of the methods are discussed. Recent advances in extended EXAFS and polarized EXAFS using oriented membranes and single crystals are explained. Developments in theory in understanding the XANES spectra are described. The application of X-ray absorption spectroscopy to the study of the Mn(4)Ca cluster in Photosystem II is presented.

| S-EPMC2777224 | biostudies-other

X-ray Absorption Spectroscopy as a Probe of Ligand Noninnocence in Metallocorroles: The Case of Copper Corroles.

Project description:The question of ligand noninnocence in Cu corroles has long been a topic of discussion. Presented herein is a Cu K-edge X-ray absorption spectroscopy (XAS) study, which provides a direct probe of the metal oxidation state, of three Cu corroles, Cu[TPC], Cu[Br8TPC], and Cu[(CF3)8TPC] (TPC = meso-triphenylcorrole), and the analogous Cu(II) porphyrins, Cu[TPP], Cu[Br8TPP], and Cu[(CF3)8TPP] (TPP = meso-tetraphenylporphyrin). The Cu K rising-edges of the Cu corroles were found to be about 0-1 eV upshifted relative to the analogous porphyrins, which is substantially lower than the 1-2 eV shifts typically exhibited by authentic Cu(II)/Cu(III) model complex pairs. In an unusual twist, the Cu K pre-edge regions of both the Cu corroles and the Cu porphyrins exhibit two peaks split by 0.8-1.3 eV. Based on time-dependent density functional theory calculations, the lower- and higher-energy peaks were assigned to a Cu 1s ? 3d x2- y2 transition and a Cu 1s ? corrole/porphyrin ?* transition, respectively. From the Cu(II) porphyrins to the corresponding Cu corroles, the energy of the Cu 1s ? 3d x2- y2 transition peak was found to upshift by 0.6-0.8 eV. This shift is approximately half that observed between Cu(II) to Cu(III) states for well-defined complexes. The Cu K-edge XAS spectra thus show that although the metal sites in the Cu corroles are more oxidized relative to those in their Cu(II) porphyrin analogues, they are not oxidized to the Cu(III) level, consistent with the notion of a noninnocent corrole. The relative importance of ?-donation versus corrole ?-radical character is discussed.

| S-EPMC6644708 | biostudies-literature

Pump-Flow-Probe X-Ray Absorption Spectroscopy as a Tool for Studying Intermediate States of Photocatalytic Systems.

Project description:A new setup for pump-flow-probe X-ray absorption spectroscopy has been implemented at the SuperXAS beamline of the Swiss Light Source. It allows recording X-ray absorption spectra with a time resolution of tens of microseconds and high detection efficiency for samples with sub-mM concentrations. A continuous wave laser is used for the photoexcitation, with the distance between laser and X-ray beams and velocity of liquid flow determining the time delay, while the focusing of both beams and the flow speed define the time resolution. This method is compared with the alternative measurement technique that utilizes a 1 kHz repetition rate laser and multiple X-ray probe pulses. Such an experiment was performed at beamline 11ID-D of the Advanced Photon Source. Advantages, limitations and potential for improvement of the pump-flow-probe setup are discussed by analyzing the photon statistics. Both methods, with Co K-edge probing were applied to the investigation of a cobaloxime-based photo-catalytic reaction. The interplay between optimizing for efficient photoexcitation and time resolution as well as the effect of sample degradation for these two setups are discussed.

| S-EPMC3892145 | biostudies-literature

High-throughput computational X-ray absorption spectroscopy.

Project description:X-ray absorption spectroscopy (XAS) is a widely-used materials characterization technique. In this work we present a database of computed XAS spectra, using the Green's formulation of the multiple scattering theory implemented in the FEFF code. With more than 500,000 K-edge X-ray absorption near edge (XANES) spectra for more than 40,000 unique materials, this database constitutes the largest existing collection of computed XAS spectra to date. The data is openly distributed via the Materials Project, enabling researchers across the world to access it for free and use it for comparisons with experiments and further analysis.

| S-EPMC6067047 | biostudies-literature

X-ray absorption spectroscopy of dinuclear metallohydrolases.

Project description:In this mini-review, we briefly discuss the physical origin of x-ray absorption spectroscopy (XAS) before illustrating its application using dinuclear metallohydrolases as exemplary systems. The systems we have selected for illustrative purposes present a challenging problem for XAS, one that is ideal to demonstrate the potential of this methodology for structure/function studies of metalloenzymes in general. When the metal ion is redox active, XAS provides a sensitive measure of oxidation-state-dependent differences. When the metal ion is zinc, XAS is the only spectroscopic method that will provide easily accessible structural information in solution. In the case of heterodimetallic sites, XAS has the unique ability to interrogate each metal site independently in the same sample. One of the strongest advantages of XAS is its ability to examine metal ion site structures with crystallographic precision, without the need for a crystal. This is key for studying flexible metal ion sites, such as those described in the selected examples, because it allows one to monitor structural changes that occur during substrate turnover.

| S-EPMC4167288 | biostudies-literature

Operando time-resolved X-ray absorption spectroscopy reveals the chemical nature enabling highly selective CO<sub>2</sub> reduction.

Project description:Copper electrocatalysts have been shown to selectively reduce carbon dioxide to hydrocarbons. Nevertheless, the absence of a systematic study based on time-resolved spectroscopy renders the functional agent-either metallic or oxidative Copper-for the selectivity still undecidable. Herein, we develop an operando seconds-resolved X-ray absorption spectroscopy to uncover the chemical state evolution of working catalysts. An oxide-derived Copper electrocatalyst is employed as a model catalyst to offer scientific insights into the roles metal states serve in carbon dioxide reduction reaction (CO2RR). Using a potential switching approach, the model catalyst can achieve a steady chemical state of half-Cu(0)-and-half-Cu(I) and selectively produce asymmetric C2 products - C2H5OH. Furthermore, a theoretical analysis reveals that a surface composed of Cu-Cu(I) ensembles can have dual carbon monoxide molecules coupled asymmetrically, which potentially enhances the catalyst's CO2RR product selectivity toward C2 products. Our results offer understandings of the fundamental chemical states and insights to the establishment of selective CO2RR.

| S-EPMC7360608 | biostudies-literature

Ancient wood of the Acqualadrone rostrum: materials history through gas chromatography/mass spectrometry and sulfur X-ray absorption spectroscopy.

Project description:In 2008 the rostrum from an ancient warship was recovered from the Mediterranean near Acqualadrone, Sicily. To establish its provenance and condition, samples of black and brown rostrum wood were examined using sulfur K-edge X-ray absorption spectroscopy (XAS) and gas chromatography/mass spectrometry (GC/MS). GC/MS of pyrolytic volatiles yielded only guaiacyl derivatives, indicating construction from pinewood. A derivatized extract of black wood yielded forms of abietic acid and sandaracopimaric acid consistent with pine pitch waterproofing. Numerical fits to the sulfur K-edge XAS spectra showed that about 65% of the endogenous sulfur consisted of thiols and disulfides. Elemental sulfur was about 2% and 7% in black and brown wood, respectively, while pyritic sulfur was about 12% and 6%. About 2% of the sulfur in both wood types was modeled as trimethylsulfonium, possibly reflecting biogenic (dimethylsulfonio)propionate. High-valent sulfur was exclusively represented by sulfate esters, consistent with bacterial sulfotransferase activity. Traces of chloride were detected, but no free sulfate ion. In summary, the rostrum was manufactured of pine wood and subsequently waterproofed with pine pitch. The subsequent 2300 years included battle, foundering, and marine burial followed by anoxia, bacterial colonization, sulfate reduction, and mobilization of transition metals, which produced pyrite and copious appended sulfur functionality.

| S-EPMC3353731 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data