Statistical interpretation of "femtomolar" detection.
Ontology highlight
ABSTRACT:
SUBMITTER: Go J
PROVIDER: S-EPMC2728341 | biostudies-other | 2009 Jul
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Cation exchange (CX) in the nonfluorescent ZnS nanocrystal clusters (NCCs) was employed to detect trace biomolecules with immunoassays. The NCCs were porous and allowed fast cation exchange reaction to release an ultralarge number of Zn(2+) from each cluster that turned on the Zn-responsive dyes for fluorescence detection. The ZnS NCCs were highly stable in biological buffers and more biocompatible than quantum dots. Zn(2+) release efficiency and target binding by NCCs with average diameters of 44 nm, 86 nm, and 144 nm were investigated. The smallest NCCs exhibited the highest CX efficiency because of its larger surface area and bigger pores inside the cluster structure, and 71.0% of the enclosed Zn(2+) were freed by CX with 2-min microwave irradiation. They also experienced the least space hindrance and the fastest rate when binding to target molecules immobilized on surface. When the 44-nm NCCs were used to detect IgE in a sandwich assay, the limit of detection (LOD) was 5 pg/mL (33 fM), 1,000 times better than that of ELISA. Our results well demonstrate that CX in the ZnS NCCs is superior to the conventional signaling strategies in its high amplification efficiency, robustness, and biocompatibility.
| S-EPMC3277649 | biostudies-literature
Project description:Chlorpyrifos is one of the most widely used pesticides that acts on the nervous system by inhibiting acetylcholinesterase. Prolonged use of chlorpyrifos causes severe neurological, autoimmune, and persistent developmental disorders in humans. Therefore, in this study, a highly sensitive and robust biosensor platform was devised by fabricating graphene field effect transistors (graFET) on Si/SiO2 substrate for the detection of chlorpyrifos in real samples. Anti-chlorpyrifos antibodies were immobilized successfully on the graphene surface. Under optimal conditions, graFET sensor showed an excellent response for chlorpyrifos detection in the linear range of 1 fM to 1 µM with a limit of detection up to 1.8 fM in spiked samples. The developed graFET biosensor is highly stable, sensitive, and specific for chlorpyrifos as confirmed by its significant ability to detect changes in electrostatic potential. These findings signify useful efficacy of immunobiosensors for the detection of chlorpyrifos and other organophosphates in fruits and vegetables.
| S-EPMC6343030 | biostudies-literature
Project description:Here, we present a graphene-based analyte-induced disruption of luminescence quenching (AIDLuQ) assay for specific detection of biomarkers with femtomolar sensitivity. In the AIDLuQ assay, antibody (Ab)-conjugated quantum dots (QDs) are initially deposited on graphene-coated paper. However, the emission from QDs is quenched due to resonance energy transfer to graphene. Upon the addition of an analyte (An) corresponding to Ab, the QDs-Ab-An complex is lifted above the surface resulting in the disruption of the quenching from graphene and the recovery of the luminescence of the QDs. The percentage of recovery depends upon the concentration of the analyte, allowing one to create standard curves for effective quantification. Despite its rapidity in assay time (15-20 min), the graphene platform has limited sensitivities. To further enhance this sensitivity, we embedded gold nanoparticles (Au NPs) into graphene paper. The graphene-Au paper exhibited excellent sensitivity in our model assay and was able to detect ∼10 fM biotin and IgG, unlike graphene that showed only ∼1 nM and ∼10 pM sensitivities.
| S-EPMC7085113 | biostudies-literature
Project description:The detection and quantification of low-abundance molecular biomarkers in biological samples is challenging. Here, we show that a plasmonic nanoscale construct serving as an 'add-on' label for a broad range of bioassays improves their signal-to-noise ratio and dynamic range without altering their workflow and readout devices. The plasmonic construct consists of a bovine serum albumin scaffold with approximately 210 IRDye 800CW fluorophores (with a fluorescence intensity approximately 6,700-fold that of a single 800CW fluorophore), a polymer-coated gold nanorod acting as a plasmonic antenna and biotin as a high-affinity biorecognition element. Its emission wavelength can be tuned over the visible and near-infrared spectral regions by modifying its size, shape and composition. It improves the limit of detection in fluorescence-linked immunosorbent assays by up to 4,750-fold and is compatible with multiplexed bead-based immunoassays, immunomicroarrays, flow cytometry and immunocytochemistry methods, and it shortens overall assay times (to 20 min) and lowers sample volumes, as shown for the detection of a pro-inflammatory cytokine in mouse interstitial fluid and of urinary biomarkers in patient samples.
| S-EPMC7231648 | biostudies-literature
Project description:Effective and efficient management of human betacoronavirus severe acute respiratory syndrome (SARS)-CoV-2 virus infection i.e., COVID-19 pandemic, required sensitive and selective sensors with short sample-to-result durations for performing desired diagnostics. In this direction, one appropriate alternative approach to detect SARS-CoV-2 virus protein at low level i.e., femtomolar (fM) is exploring plasmonic metasensor technology for COVID-19 diagnostics, which offers exquisite opportunities in advanced healthcare programs, and modern clinical diagnostics. The intrinsic merits of plasmonic metasensors stem from their capability to squeeze electromagnetic fields, simultaneously in frequency, time, and space. However, the detection of low-molecular weight biomolecules at low densities is a typical drawback of conventional metasensors that has recently been addressed using toroidal metasurface technology. This research is focused on the fabrication of a miniaturized plasmonic immunosensor based on toroidal electrodynamics concept that can sustain robustly confined plasmonic modes with ultranarrow lineshapes in the terahertz (THz) frequencies. By exciting toroidal dipole mode using our quasi-infinite metasurface and a judiciously optimized protocol based on functionalized gold nanoparticles (AuNPs) conjugated with the specific monoclonal antibody specific to spike protein (S1) of SARS-CoV-2 virus onto the metasurface, the resonance shifts for diverse concentrations of the spike protein are monitored. Possessing molecular weight around ~76 kDa allowed to detect the presence of SARS-CoV-2 virus protein with significantly low as limit of detection (LoD) was achieved as ~4.2 fM. We envisage that outcomes of this research will pave the way toward the use of toroidal metasensors as practical technologies for rapid and precise screening of SARS-CoV-2 virus carriers, symptomatic or asymptomatic, and spike proteins in hospitals, clinics, laboratories, and site of infection.
| S-EPMC7787065 | biostudies-literature
Project description:The development of a proficient and ultra-high sensitive functionalized electrode for accurate analysis of drugs is a long-standing challenge. Herein, we report an electrochemical nanocomposite scaffold, comprising of silver nanoparticles integrated with functionalized carbon nanotubes (COOH-CNTs/Ag/NH2-CNTs) for the simultaneous quantification of two widely used amlodipine (AM) and atorvastatin (AT) drugs. The sandwiched nanocomposite materials were thoroughly characterized morphologically and structurally. The nanocomposite COOH-CNTs/Ag/NH2-CNTs immobilized over glassy carbon electrode catalyzed electron transfer reactions at the electrode-electrolyte interface and facilitated detection of targeted drugs, as revealed by the significant decrease in oxidation potentials at 879 mV and 1040 mV and improved current signals. Electrochemical characterization and testing show that the functionalized porous architecture with a large effective surface area is a promising scaffold for the sensing of a binary mixture of AM and AT with limits of detection in the femtomolar range (77.6 fM, and 83.2 fM, respectively). Besides, the specificity, stability, and reliability of the electrochemical sensing platform in simple and complex biological and pharmaceutical samples with high percentage recoveries highlight its scope for practical applications. Computational studies supported the experimental outcomes and offered insights about the role of modifier in facilitating electron transfer between transducer and analytes.
| S-EPMC9037620 | biostudies-literature
Project description:Fluorescence tends to produce the lowest detection limits for most forms of capillary electrophoresis. Two issues have discouraged its use in capillary isoelectric focusing. The first issue is fluorescent labeling of proteins. Most labeling reagents react with lysine residues and convert the cationic residue to a neutral or anionic product. At best, these reagents perturb the isoelectric point of the protein. At worse, they convert each protein into hundreds of different fluorescent products that confound analysis. The second issue is the large background signal generated by impurities within commercial ampholytes. This background signal is particularly strong when excited in the blue portion of the spectrum, which is required by many common fluorescent labeling reagents. This paper addresses these issues. For labeling, we employ Chromeo P540, which is a fluorogenic reagent that converts cationic lysine residues to cationic fluorescent products. The reaction products are excited in the green, which reduces the background signal generated by impurities present within the ampholytes. To further reduce the background signal, we photobleach ampholytes with high-power photodiodes. Photobleaching reduced the noise in the ampholyte blank by an order of magnitude. Isoelectric focusing performed with photobleached pH 3-10 ampholytes produced concentration detection limits of 270 +/- 25 fM and mass detection limits of 150 +/- 15 zmol for Chromeo P540 labeled beta-lactoglobulin. Concentration detection limits were 520 +/- 40 fM and mass detection limits were 310 +/- 30 zmol with pH 4-8 ampholytes. A homogenate was prepared from a Barrett's esophagus cell line and separated by capillary isoelectric focusing, reproducibly generating dozens of peaks. The sample taken for the separation was equal to the labeled protein homogenate from three cells.
| S-EPMC2765481 | biostudies-literature
Project description:Over the last decade, oxytocin (OT) has received focus in numerous studies associating intranasal administration of this peptide with various aspects of human social behavior. These studies in humans are inspired by animal research, especially in rodents, showing that central manipulations of the OT system affect behavioral phenotypes related to social cognition, including parental behavior, social bonding, and individual recognition. Taken together, these studies in humans appear to provide compelling, but sometimes bewildering, evidence for the role of OT in influencing a vast array of complex social cognitive processes in humans. In this article, we investigate to what extent the human intranasal OT literature lends support to the hypothesis that intranasal OT consistently influences a wide spectrum of social behavior in humans. We do this by considering statistical features of studies within this field, including factors like statistical power, prestudy odds, and bias. Our conclusion is that intranasal OT studies are generally underpowered and that there is a high probability that most of the published intranasal OT findings do not represent true effects. Thus, the remarkable reports that intranasal OT influences a large number of human social behaviors should be viewed with healthy skepticism, and we make recommendations to improve the reliability of human OT studies in the future.
| S-EPMC4690817 | biostudies-literature
Project description:Conventional statistical methods for interpreting microarray data require large numbers of replicates in order to provide sufficient levels of sensitivity. We recently described a method for identifying differentially-expressed genes in one-channel microarray data 1. Based on the idea that the variance structure of microarray data can itself be a reliable measure of noise, this method allows statistically sound interpretation of as few as two replicates per treatment condition. Unlike the one-channel array, the two-channel platform simultaneously compares gene expression in two RNA samples. This leads to covariation of the measured signals. Hence, by accounting for covariation in the variance model, we can significantly increase the power of the statistical test. We believe that this approach has the potential to overcome limitations of existing methods. We present here a novel approach for the analysis of microarray data that involves modeling the variance structure of paired expression data in the context of a Bayesian framework. We also describe a novel statistical test that can be used to identify differentially-expressed genes. This method, bivariate microarray analysis (BMA), demonstrates dramatically improved sensitivity over existing approaches. We show that with only two array replicates, it is possible to detect gene expression changes that are at best detected with six array replicates by other methods. Further, we show that combining results from BMA with Gene Ontology annotation yields biologically significant results in a ligand-treated macrophage cell system.
| S-EPMC2735646 | biostudies-literature
Project description:We report the femtomolar detection of silver (Ag) nanoparticles by direct-impact voltammetry. This is achieved through the use of a random array of microelectrodes (RAM) integrated into a purpose-built flow cell, allowing combined diffusion and convection to the electrode surface. A coupled RAM-flow cell system is implemented and is shown to give reproducible wall-jet type flow characteristics, using potassium ferrocyanide as a molecular redox species. The calibrated flow system is then used to detect and quantitatively size Ag nanoparticles at femtomolar concentrations. Under flow conditions, it is found the nanoparticle impact frequency increases linearly with the volumetric flow rate. The resulting limit of detection is more than 2 orders of magnitude smaller than the previous detection limit for direct-impact voltammetry (900 fM) [J. Ellison et al. Sens. Actuators, B 2014, 200, 47], and is more than 30 times smaller than the previous detection limit for mediated-impact voltammetry (83 fM) [T. M. Alligrant et al. Langmuir 2014, 30, 13462].
| S-EPMC5015217 | biostudies-literature