On-chip CMOS-compatible all-optical integrator.
Ontology highlight
ABSTRACT:
SUBMITTER: Ferrera M
PROVIDER: S-EPMC2982162 | biostudies-other | 2010
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Memory devices with high speed and high density are highly desired to address the 'memory wall' issue. Here we demonstrated a highly scalable, three-dimensional stackable ferroelectric diode, with its rectifying polarity modulated by the polarization reversal of Hf0.5Zr0.5O2 films. By visualizing the hafnium/zirconium lattice order and oxygen lattice order with atomic-resolution spherical aberration-corrected STEM, we revealed the correlation between the spontaneous polarization of Hf0.5Zr0.5O2 film and the displacement of oxygen atom, thus unambiguously identified the non-centrosymmetric Pca21 orthorhombic phase in Hf0.5Zr0.5O2 film. We further implemented this ferroelectric diode in an 8 layers 3D array. Operation speed as high as 20?ns and robust endurance of more than 109 were demonstrated. The built-in nonlinearity of more than 100 guarantees its self-selective property that eliminates the need for external selectors to suppress the leakage current in large array. This work opens up new opportunities for future memory hierarchy evolution.
| S-EPMC7070068 | biostudies-literature
Project description:All-optical analog-to-digital converters based on the third-order nonlinear effects in silicon waveguide are a promising candidate to overcome the limitation of electronic devices and are suitable for photonic integration. In this paper, a 2-bit optical spectral quantization scheme for on-chip all-optical analog-to-digital conversion is proposed. The proposed scheme is realized by filtering the broadened and split spectrum induced by the self-phase modulation effect in a silicon horizontal slot waveguide filled with silicon-nanocrystal. Nonlinear coefficient as high as 8708 W(-1)/m is obtained because of the tight mode confinement of the horizontal slot waveguide and the high nonlinear refractive index of the silicon-nanocrystal, which provides the enhanced nonlinear interaction and accordingly low power threshold. The results show that a required input peak power level less than 0.4 W can be achieved, along with the 1.98-bit effective-number-of-bit and Gray code output. The proposed scheme can find important applications in on-chip all-optical digital signal processing systems.
| S-EPMC4241521 | biostudies-other
Project description:Optical pulses are fundamentally defined by their temporal and spectral properties. The ability to control pulse properties allows practitioners to efficiently leverage them for advanced metrology, high speed optical communications and attosecond science. Here, we report 11× temporal compression of 5.8 ps pulses to 0.55 ps using a low power of 13.3 W. The result is accompanied by a significant increase in the pulse peak power by 9.4×. These results represent the strongest temporal compression demonstrated to date on a complementary metal-oxide-semiconductor (CMOS) chip. In addition, we report the first demonstration of on-chip spectral compression, 3.0× spectral compression of 480 fs pulses, importantly while preserving the pulse energy. The strong compression achieved at low powers harnesses advanced on-chip device design, and the strong nonlinear properties of backend-CMOS compatible ultra-silicon-rich nitride, which possesses absence of two-photon absorption and 500× larger nonlinear parameter than in stoichiometric silicon nitride waveguides. The demonstrated work introduces an important new paradigm for spectro-temporal compression of optical pulses toward turn-key, on-chip integrated systems for all-optical pulse control.
| S-EPMC8211677 | biostudies-literature
Project description:Photonic metasurfaces compatible with large-scale production such as CMOS are of importance because they promise cointegration of electronics with photonics for detection, communication and sensing. The main challenges on the way of designing such metasurfaces are: (1) large variety of possible geometrical shapes of metasurface elements that makes finding the most appropriate shape difficult; (2) poor compatibility of available electronic layer stacks with photonics. In this paper we show how to address both of these challenges utilizing extended equivalent-circuit analysis. In a first step we classify the behavior of different metasurfaces using the equivalent circuit. We discover that metasurfaces that use inverted-dipole resonator type exhibit higher tolerance to dielectric spacer thickness, higher angular stability and have similar resonance quality-factor as other types. In the second step we utilize the equivalent-circuit scheme to efficiently optimize the parameters of inverted-dipole based metasurfaces for a layer stack such as given in a CMOS process. Finally, as an example we demonstrate how an inverted-cross structure can be adapted to a commercial 110 nm CMOS process with Al metal layers. We measured peak absorption above 90% at center wavelength around 4 µm with quality factor of approximately 5 and angular stability larger than 60°.
| S-EPMC7578050 | biostudies-literature
Project description:Carbon nanotubes (CNTs) are ultimately small structures, attractive for future nanoelectronics. CNT-bundles on Si nanostructures can offer an alternative pathway to build hybrid CMOS-compatible devices. To develop a simple method of using such CNT-bundles as transistor channels, we fabricated semiconductor single-walled CNT field-effect transistors using inkjet printing on a CMOS-compatible platform. We investigated a method of producing stable CNT solutions without surfactants, allowing for CNT debundling and dispersion. An inkjet-printing system disperses CNT-networks with ultimately low density (down to discrete CNT-bundles) in Al source-drain gaps of transistors. Despite the small number of networks and random positions, such CNT-bundles provide paths to the flow current. For enhanced controllability, we also demonstrate the manipulation of CNT-networks using an AFM technique.
| S-EPMC9323799 | biostudies-literature
Project description:The enhanced infrared absorbance (IRA) of the complementary metal-oxide-semiconductor (CMOS) compatible thermopile with the subwavelength rectangular-hole arrays in active area is investigated. The finite-difference time-domain (FDTD) method considered and analyzed the matrix arrangement (MA) and staggered arrangement (SA) of subwavelength rectangular-hole arrays (SRHA). For the better cases of MA-SRHA and SA-SRHA, the geometric parameters are the same and the infrared absorption efficiency (IAE) of the SA type is better than that of the MA type by about 19.4% at target temperature of 60˚C. Three proposed thermopiles with SA-SRHA are manufactured based on the 0.35 μm 2P4M CMOS-MEMS process. The measurement results are similar to the simulation results. The IAE of the best simulation case of SA-SRHA is up to 3.3 times higher than that without structure at the target temperature of 60˚C. Obviously, the staggered rectangular-hole arrays with more appropriate geometric conditions obtained from FDTD simulation can excellently enhance the IRA of the CMOS compatible thermopile.
| S-EPMC7309018 | biostudies-literature
Project description:Heterostructures (HS) have always been in attraction due to their inherited properties and different important applications. Integration of a phase-change material (PCM) with HS can tremendously extend the operating and application range using the "phase-tuning" of PCM for any optoelectronic devices. In the present study, we report a detailed study of electrical and optoelectronic characteristics of a p-p and p-n HS combining Ge2Sb2Te5 (GST) and Si. Reasonable 2 order of resistance switching is achieved by thermal annealing. The changes in optical properties are analysed using Ellipsometry, UV-Vis-NIR and Raman spectroscopy to speculate the optoelectronic behaviour of GST/Si samples. The optical and electrical characterization were analysed with aluminium (Al), platinum (Pt) and Ti/Au contacts. Appreciable rectifications varying from 500 to 1,000 at lower voltages are achieved with different contacts for both phases of GST. The change in rectification amount and current polarity are obtained with different kinds of contacts and at different incident wavelengths indicating different mechanisms of charge separation and collection. Responsivity of more than 9 A/W with?<?1,000 photo-current to dark-current ratio is demonstrated in wavelength range of 0.8-2 ?m under moderate range of biasing under?~??W source power illumination. The characteristics obtained were justified with the prediction of band alignment with the help of work-function difference measurement by Kelvin-probe force microscopy and carrier density measurement by Hall experiment. Our results provide understanding to the opto-electrical behaviour of a heterojunction made of stacking PCM (GST) on Si highlighting their future use in photonic/optoelectronic-integrated circuits.
| S-EPMC7341851 | biostudies-literature
Project description:A low-loss and low-crosstalk surface-wave transmission line (T-line) is demonstrated at sub-THz in CMOS. By introducing periodical sub-wavelength structures onto the metal transmission line, surface plasmon polaritons (SPP) are excited and propagate signals via a strongly localized surface wave. Two coupled SPP T-lines and two quasi-TEM T-lines are both fabricated on-chip, each with a separation distance of 2.4 μm using standard 65 nm CMOS technology. Measurement results show that the SPP T-lines achieve wideband reflection coefficient lower than -14 dB and crosstalk ratio better than -24 dB, which is 19 dB lower on average than the traditional T-lines from 220 GHz to 325 GHz. The demonstrated compact and wideband SPP T-lines have shown great potential for future realization of highly dense on-chip sub-THz communications in CMOS.
| S-EPMC4597218 | biostudies-other
Project description:Particles manipulation with optical forces is known as optical tweezing. While tweezing in free space with laser beams was established in the 1980s, integrating the optical tweezers on a chip is a challenging task. Recent experiments with plasmonic nanoantennas, microring resonators, and photonic crystal nanocavities have demonstrated optical trapping. However, the optical field of a tweezer made of a single microscopic resonator cannot be shaped. So far, this prevents from optically driven micromanipulations. Here we propose an alternative approach where the shape of the optical trap can be tuned by the wavelength in coupled nanobeam cavities. Using these shapeable tweezers, we present micromanipulation of polystyrene microspheres trapped on a silicon chip. These results show that coupled nanobeam cavities are versatile building blocks for optical near-field engineering. They open the way to much complex integrated tweezers using networks of coupled nanobeam cavities for particles or bio-objects manipulation at a larger scale.
| S-EPMC3724184 | biostudies-literature
Project description:Airflow sensors are an essential component in a wide range of industrial, biomedical, and environmental applications. The development of compact devices with a fast response and wide measurement range capable of in situ airflow monitoring is highly desirable. Herein, we report a miniaturized optical airflow sensor based on a GaN chip with a flexible PDMS membrane. The compact GaN chip is responsible for light emission and photodetection. The PDMS membrane fabricated using a droplet-based molding process can effectively transform the airflow stimuli into optical reflectance changes that can be monitored by an on-chip photodetector. Without the use of external components for light coupling, the proposed sensor adopting the novel integration scheme is capable of detecting airflow rates of up to 53.5 ms-1 and exhibits a fast response time of 12 ms, holding great promise for diverse practical applications. The potential use in monitoring human breathing is also demonstrated.
| S-EPMC8724291 | biostudies-literature