Biomedical applications of a real-time terahertz color scanner.
Ontology highlight
ABSTRACT:
SUBMITTER: Schirmer M
PROVIDER: S-EPMC3018018 | biostudies-other | 2010
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Terahertz instrumentation has improved significantly in recent years such that THz imaging systems have become more affordable and easier to use. THz systems can now be operated by non-THz experts greatly facilitating research into many potential applications. Due to the non-ionising nature of THz light and its high sensitivity to soft tissues, there is an increasing interest in biomedical applications including both in vivo and ex vivo studies. Additionally, research continues into understanding the origin of contrast and how to interpret terahertz biomedical images. This short review highlights some of the recent work in these areas and suggests some future research directions.
| S-EPMC5537133 | biostudies-other
Project description:We report on the development and characterization of a handheld terahertz (THz) time-domain spectroscopic scanner for broadband imaging between approximately 0.25 and 1.25 THz. We designed and fabricated a 3D-printed fiber-coupled housing which provides an alignment-free strategy for the placement and operation of the THz optics. Image formation is achieved through telecentric beam steering over a planar surface through a custom f-θ scanning lens. This design achieves a consistent resolution over the full 12 × 19 mm field of view. Broadband spectral imaging is demonstrated using a 1951 United States Air Force Resolution Test Target. The consistency of the resolution over the wide field is validated through Boehler Star resolution measurements. Finally, a practical scenario of subsurface imaging on a damaged section of an aircraft wing is demonstrated. The THz PHASR is a field-deployable imaging system with the versatility to be applied to a much broader range of targets and imaging scenarios than previously possible, from industrial non-destructive testing to clinical diagnostic imaging.
| S-EPMC9009755 | biostudies-literature
Project description:Terahertz (THz) imaging has a strong potential for applications because many molecules have fingerprint spectra in this frequency region. Spectroscopic imaging in the THz region is a promising technique to fully exploit this characteristic. However, the performance of conventional techniques is restricted by the requirement of multidimensional scanning, which implies an image data acquisition time of several minutes. In this study, we propose and demonstrate a novel broadband THz spectroscopic imaging method that enables real-time image acquisition using a high-sensitivity THz camera. By exploiting the two-dimensionality of the detector, a broadband multi-channel spectrometer near 1 THz was constructed with a reflection type diffraction grating and a high-power THz source. To demonstrate the advantages of the developed technique, we performed molecule-specific imaging and high-speed acquisition of two-dimensional (2D) images. Two different sugar molecules (lactose and D-fructose) were identified with fingerprint spectra, and their distributions in one-dimensional space were obtained at a fast video rate (15 frames per second). Combined with the one-dimensional (1D) mechanical scanning of the sample, two-dimensional molecule-specific images can be obtained only in a few seconds. Our method can be applied in various important fields such as security and biomedicine.
| S-EPMC5309736 | biostudies-literature
Project description:Terahertz (THz) radiation is poised to have an essential role in many imaging applications, from industrial inspections to medical diagnosis. However, commercialization is prevented by impractical and expensive THz instrumentation. Single-pixel cameras have emerged as alternatives to multi-pixel cameras due to reduced costs and superior durability. Here, by optimizing the modulation geometry and post-processing algorithms, we demonstrate the acquisition of a THz-video (32 × 32 pixels at 6 frames-per-second), shown in real-time, using a single-pixel fiber-coupled photoconductive THz detector. A laser diode with a digital micromirror device shining visible light onto silicon acts as the spatial THz modulator. We mathematically account for the temporal response of the system, reduce noise with a lock-in free carrier-wave modulation and realize quick, noise-robust image undersampling. Since our modifications do not impose intricate manufacturing, require long post-processing, nor sacrifice the time-resolving capabilities of THz-spectrometers, their greatest asset, this work has the potential to serve as a foundation for all future single-pixel THz imaging systems.
| S-EPMC7242476 | biostudies-literature
Project description:Terahertz technologies are attracting strong interest from high-end industrial fields, and particularly for non-destructive-testing purposes. Currently lacking compactness, integrability as well as adaptability for those implementations, the development and commercialisation of more efficient sources and detectors progressively ensure the transition toward applicative implementations, especially for real-time full-field imaging. In this work, a flexible illumination system, based on fast beam steering has been developed and characterized. Its primary goal is to suppress interferences induced by the coherence length of certain terahertz sources, spoiling terahertz images. The second goal is to ensure an enhanced signal-to-noise ratio on the detector side by the full use and optimized distribution of the available power. This system provides a homogeneous and adjustable illumination through a simplified setup to guarantee optimum real-time imaging capabilities, tailored to the sample under inspection. Working toward industrial implementations, different illumination process are conveniently assessed as a result of the versatility of this method.
| S-EPMC7412008 | biostudies-literature
Project description:Real-time terahertz (THz) imaging offers remarkable application possibilities, especially in the security and medical fields. However, most THz detectors work with scanners, and a long image acquisition time is required. Some thermal detectors can achieve real-time imaging by using a focal plane array but have the drawbacks of low sensitivity due to a lack of suitable absorbing materials. In this study, we propose a novel photomechanical meta-molecule array by conveniently assembling THz meta-atom absorbers and bi-material cantilevers together, which can couple THz radiation to a mechanical deflection of the meta-molecules with high efficiency. By optically reading out the mechanical deflections of all of the meta-molecules simultaneously, real-time THz imaging can be achieved. A polyimide sacrificial layer technique was developed to fabricate the device on a glass wafer, which facilitates the transmission of a readout light while the THz wave radiates onto the meta-molecule array directly from the front side. THz images and video of various objects as well as infrared images of the human body were captured successfully with the fabricated meta-molecule array. The proposed photomechanical device holds promise in applications in single and broadband THz as well as infrared imaging.
| S-EPMC6444985 | biostudies-literature
Project description:Coherent imaging in the THz range promises to exploit the peculiar capabilities of these wavelengths to penetrate common materials like plastics, ceramics, paper or clothes with potential breakthroughs in non-destructive inspection and quality control, homeland security and biomedical applications. Up to now, however, THz coherent imaging has been limited by time-consuming raster scanning, point-like detection schemes and by the lack of adequate coherent sources. Here, we demonstrate real-time digital holography (DH) at THz frequencies exploiting the high spectral purity and the mW output power of a quantum cascade laser combined with the high sensitivity and resolution of a microbolometric array. We show that, in a one-shot exposure, phase and amplitude information of whole samples, either in reflection or in transmission, can be recorded. Furthermore, a 200 times reduced sensitivity to mechanical vibrations and a significantly enlarged field of view are observed, as compared to DH in the visible range. These properties of THz DH enable unprecedented holographic recording of real world dynamic scenes.
| S-EPMC4551990 | biostudies-literature
Project description:Terahertz (THz) technologies have become a focus of research in recent years due to their prominent role in envisioned future communication and sensing systems. One of the key challenges facing the field is the need for tools to enable agile engineering of THz wave fronts. Here, we describe a reconfigurable metasurface based on GaN technology with an array-of-subarrays architecture. This subwavelength-spaced array, under the control of a 1-bit digital coding sequence, can switch between an enormous range of possible configurations, providing facile access to nearly arbitrary wave front control for signals near 0.34 THz. We demonstrate wide-angle beam scanning with 1° of angular precision over 70 GHz of bandwidth, as well as the generation of multi-beam and diffuse wave fronts, with a switching speed up to 100 MHz. This device, offering the ability to rapidly reconfigure a propagating wave front for beam-forming or diffusively scattered wide-angle coverage of a scene, will open new realms of possibilities in sensing, imaging, and networking.
| S-EPMC10406829 | biostudies-literature
Project description:Leishmaniasis is a vector-borne disease caused by many Leishmania species, which can infect both humans and other mammals. Leishmaniasis is a complex disease, with heterogeneous clinical manifestations ranging from asymptomatic infections to lesions at cutaneous sites (cutaneous leishmaniasis), mucosal sites (mucocutaneous leishmaniasis) or in visceral organs (visceral leishmaniasis), depending on the species and host characteristics. Often, symptoms are inconclusive and leishmaniasis can be confused with other co-endemic diseases. Moreover, co-infections (mainly with HIV in humans) can produce atypical clinical presentations. A correct diagnosis is crucial to apply the appropriate treatment and the use of molecular techniques in diagnosis of leishmaniasis has become increasingly relevant due to their remarkable sensitivity, specificity and possible application to a variety of clinical samples. Among them, real-time PCR (qPCR)-based approaches have become increasingly popular in the last years not only for detection and quantification of Leishmania species but also for species identification. However, despite qPCR-based methods having proven to be very effective in the diagnosis of leishmaniasis, a standardized method does not exist. This review summarizes the qPCR-based methods in the diagnosis of leishmaniasis focusing on the recent developments and applications in this field.
| S-EPMC5930967 | biostudies-literature
Project description:Background: Digital clinical measures collected via various digital sensing technologies such as smartphones, smartwatches, wearables, and ingestible and implantable sensors are increasingly used by individuals and clinicians to capture the health outcomes or behavioral and physiological characteristics of individuals. Time series classification (TSC) is very commonly used for modeling digital clinical measures. While deep learning models for TSC are very common and powerful, there exist some fundamental challenges. This review presents the non-deep learning models that are commonly used for time series classification in biomedical applications that can achieve high performance. Objective: We performed a systematic review to characterize the techniques that are used in time series classification of digital clinical measures throughout all the stages of data processing and model building. Methods: We conducted a literature search on PubMed, as well as the Institute of Electrical and Electronics Engineers (IEEE), Web of Science, and SCOPUS databases using a range of search terms to retrieve peer-reviewed articles that report on the academic research about digital clinical measures from a five-year period between June 2016 and June 2021. We identified and categorized the research studies based on the types of classification algorithms and sensor input types. Results: We found 452 papers in total from four different databases: PubMed, IEEE, Web of Science Database, and SCOPUS. After removing duplicates and irrelevant papers, 135 articles remained for detailed review and data extraction. Among these, engineered features using time series methods that were subsequently fed into widely used machine learning classifiers were the most commonly used technique, and also most frequently achieved the best performance metrics (77 out of 135 articles). Statistical modeling (24 out of 135 articles) algorithms were the second most common and also the second-best classification technique. Conclusions: In this review paper, summaries of the time series classification models and interpretation methods for biomedical applications are summarized and categorized. While high time series classification performance has been achieved in digital clinical, physiological, or biomedical measures, no standard benchmark datasets, modeling methods, or reporting methodology exist. There is no single widely used method for time series model development or feature interpretation, however many different methods have proven successful.
| S-EPMC9611376 | biostudies-literature