Dataset Information

A variable echo-number method for estimating R2 in MRI-based polymer gel dosimetry.

ABSTRACT: Spin-spin relaxation rate R2 is commonly used to quantify absorbed dose for magnetic resonance imaging (MRI)-based polymer gel dosimetry. R2 is estimated by applying a parameter fitting algorithm to a train of spin-echo signals. However, a careless application of a large number of echoes can result in anomalous R2 values because the echo signal intensity decreases to the background signal offset level for a long echo time. In this article, the authors proposed and evaluated a variable echo-number (VAREC) method to remedy the problem.The VAREC algorithm uses only echo signals, whose intensities are greater than a preset threshold. Here, the threshold is defined as the standard deviation of Gaussian noise times a multiplier alpha. The authors implemented three R2 estimation methods in an in-house program: The nonlinear least-squares algorithm (NLLS), the VAREC method, and the maximum likelihood estimator with the Rician signal intensity distribution (MLE_R). Those methods were used to estimate the R2 values of test phantoms with known R2 values and BANG3-type polymer gels, which were irradiated to 12 different doses ranging from 0 to 50 Gy. The R2 values were measured by using a 32-echo CPMG pulse sequence on 3 T MRI scanners. The R2 values of the VAREC method were compared with those of NLLS and MLE_R.The R2 values of the NLLS method incorrectly decreased to the zero-dose level for doses greater than 10 Gy. The R2 values of the VAREC method with alpha=2 agreed with those of MLE_R within the measurement uncertainty. The uncertainties of the R2 values were the smallest for alpha=2 or 3 among various alpha values.The VAREC algorithm is simple, fast, and robust for the R2 estimation. The authors recommend this method with alpha=2 or 3 for R2 estimation using multispin echo MRI protocols.

SUBMITTER: Watanabe Y

PROVIDER: S-EPMC3041809 | biostudies-other | 2011 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:PurposeThe purpose of this work was to examine the suitability of VIPARnd polymer gel-9.4 T magnetic resonance microimaging system for high spatial resolution dose distribution measurements.MethodsThe VIPARnd samples (3 cm in outside diameter and 12 cm in height) were exposed to ionizing radiation by using a linear accelerator (Varian TrueBeam, USA; 6 MV x-ray beam). In the calibration stage, nine gel dosimeter vials were irradiated in a water phantom homogenously to the doses from 1.5 to 30 Gy in order to obtain R2-dose relation. In the verification stage, two gel dosimeter vials were irradiated in the half beam penumbra area of 10 × 10 cm radiation field using the amount of monitor units appropriate to deliver 20 Gy at the field center. The gels were imaged on a vertical 9.4 T magnetic resonance (MR) microimaging scanner using single slice and multislice (9 slices) multiecho (90 × 7 ms) sequences at the spatial resolutions of 0.2-0.4 × 0.2-0.4 × 3 mm3 and 0.2-0.4 × 0.2-0.4 × 1 mm3 respectively. The gels were subjected to microimaging during the period of two weeks after irradiation. The reference data consisted of the dose profiles measured using the diode dosimetry, radiochromic film, ionization chamber, and the water phantom system.ResultsThe VIPARnd -9.4 T MR microimaging system was characterized by the dose sensitivity of 0.067 ± 0.002 Gy-1 s-1 at day 3 after irradiation. The dose resolution at 10 Gy (at P = 95%) was equal to 0.42 Gy at day 3 after irradiation using a single slice sequence (0.2 × 0.2 × 3 mm3 ) and 2.0 Gy at day 4 after irradiation using a multislice sequence (0.2 × 0.2 × 1 mm3 ) for one signal acquisition (measurement time: 15 min). These values were improved by ~1.4-fold when using four signal acquisitions in the single slice sequence, and by ~2.78-fold for 12 signal acquisitions in the multislice sequence. Furthermore, decreasing the in-plane resolution from 0.2 × 0.2 mm2 to 0.4 × 0.4 mm2 resulted in a dose resolution of 0.3 Gy and 1 Gy at 10 Gy (at P = 95%) for one signal acquisition in the single slice and multislice sequences respectively (measurement time: 7.5 min). As reveals from the gamma index analysis the dose distributions measured at days 3-4 postirradiation using both VIPARnd verification phantoms agree with the data obtained using a silicon diode, assuming 1 mm/5% criterion. A good interphantom reproducibility of the polymer gel dosimetry was proved by monitoring of two phantoms up to 10 days after irradiation. However, the agreement between the dose distributions measured using the diode and polymer gel started to get worse from day 5 after irradiation.ConclusionThe VIPARnd -9.4T MR microimaging system allows to obtain dose resolution of 0.42 Gy at 10 Gy (at P = 95%) for a spatial resolution of 0.2 × 0.2 × 3 mm3 (acquisition time: 15 min). Further studies are required to improve a temporal stability of the gel-derived dose distribution.

Project description:Purpose To develop a deep learning reconstruction approach to improve the reconstruction speed and quality of highly undersampled variable-density single-shot fast spin-echo imaging by using a variational network (VN), and to clinically evaluate the feasibility of this approach. Materials and Methods Imaging was performed with a 3.0-T imager with a coronal variable-density single-shot fast spin-echo sequence at 3.25 times acceleration in 157 patients referred for abdominal imaging (mean age, 11 years; range, 1-34 years; 72 males [mean age, 10 years; range, 1-26 years] and 85 females [mean age, 12 years; range, 1-34 years]) between March 2016 and April 2017. A VN was trained based on the parallel imaging and compressed sensing (PICS) reconstruction of 130 patients. The remaining 27 patients were used for evaluation. Image quality was evaluated in an independent blinded fashion by three radiologists in terms of overall image quality, perceived signal-to-noise ratio, image contrast, sharpness, and residual artifacts with scores ranging from 1 (nondiagnostic) to 5 (excellent). Wilcoxon tests were performed to test the hypothesis that there was no significant difference between VN and PICS. Results VN achieved improved perceived signal-to-noise ratio (P = .01) and improved sharpness (P < .001), with no difference in image contrast (P = .24) and residual artifacts (P = .07). In terms of overall image quality, VN performed better than did PICS (P = .02). Average reconstruction time ± standard deviation was 5.60 seconds ± 1.30 per section for PICS and 0.19 second ± 0.04 per section for VN. Conclusion Compared with the conventional parallel imaging and compressed sensing reconstruction (PICS), the variational network (VN) approach accelerates the reconstruction of variable-density single-shot fast spin-echo sequences and achieves improved overall image quality with higher perceived signal-to-noise ratio and sharpness. © RSNA, 2018 Online supplemental material is available for this article.

Project description:We developed a multiplex PCR method based on multiple-locus variable-number tandem-repeat (VNTR) analysis (MLVA) that was designed for the rapid typing of Escherichia coli and Shigella isolates. The method amplifies seven VNTRs and does not require a sequencing capillary or fluorescent dyes. The amplification products are simply loaded on a standard agarose gel for electrophoresis, and the banding patterns are analyzed visually. We evaluated the method on 220 strains belonging to different collections: the E. coli reference (ECOR) collection (n?=?72), O1:K1 isolates causing neonatal meningitis (n?=?38), extended-spectrum beta-lactamase-producing fecal isolates belonging to the worldwide sequence type 131 (ST131) clone (n?=?38), Shiga toxin-producing E. coli (STEC) isolates of serogroups O157:H7 (n?=?21) and O26 (n?=?16, 8 of which belonged to an outbreak), 27 Shigella isolates (22 Shigella sonnei isolates, including 5 epidemic strains), and 8 reference strains. The performances were compared to those of multilocus sequence typing (MLST), the DiversiLab automated repetitive element palindromic PCR (REP-PCR), pulsed-field gel electrophoresis (PFGE), and whole-genome sequencing (WGS). We found 66 different profiles among the isolates in the ECOR collection. Among the clonal group O1:K1 isolates, 14 different profiles were identified. For the 37 STEC isolates, we found 23 profiles, with 1 corresponding to the 8 epidemic strains. We found 19 profiles among the 27 Shigella isolates, with 1 corresponding to the epidemic strain. The method was able to recognize strains of the ST131 clone and to distinguish the O16 and O25b serogroups and identified 15 different MLVA types among them. This method allows the simple, fast, and inexpensive typing of E. coli/Shigella isolates that can be carried out in any laboratory equipped for molecular biology and has a discriminatory power superior to that of MLST and DiversiLab REP-PCR but slightly lower than that of PFGE.IMPORTANCE Fast typing methods that can easily and accurately distinguish clonal groups and unrelated isolates are of particular interest for microbiologists confronted with outbreaks or performing epidemiological studies. Highly discriminatory universal methods, like PFGE, optical mapping, or WGS, are expensive and/or time-consuming. MLST is useful for phylogeny but is less discriminatory and requires sequencing facilities. PCR methods, which are fast and easy to perform, also have drawbacks. Random PCRs and REP-PCR are universal but lack reproducibility. Other PCR methods may lack the discriminatory power to differentiate isolates during outbreaks. MLVA combines the advantages of PCR methods with a high discriminatory power but in its standard form requires sequencing capillary electrophoresis. The method that we have developed combines the advantages of standard PCR (simple, fast, and inexpensive) with the high discriminatory power of MLVA and permits the typing of all E. coli isolates (either intestinal or extraintestinal pathogenic isolates as well as commensal isolates).

Dataset Information

A variable echo-number method for estimating R2 in MRI-based polymer gel dosimetry.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets