Dataset Information

Identification of flame retardants in polyurethane foam collected from baby products.

ABSTRACT: With the phase-out of PentaBDE in 2004, alternative flame retardants are being used in polyurethane foam to meet flammability standards. However, insufficient information is available on the identity of the flame retardants currently in use. Baby products containing polyurethane foam must meet California state furniture flammability standards, which likely affects the use of flame retardants in baby products throughout the U.S. However, it is unclear which products contain flame retardants and at what concentrations. In this study we surveyed baby products containing polyurethane foam to investigate how often flame retardants were used in these products. Information on when the products were purchased and whether they contained a label indicating that the product meets requirements for a California flammability standard were recorded. When possible, we identified the flame retardants being used and their concentrations in the foam. Foam samples collected from 101 commonly used baby products were analyzed. Eighty samples contained an identifiable flame retardant additive, and all but one of these was either chlorinated or brominated. The most common flame retardant detected was tris(1,3-dichloroisopropyl) phosphate (TDCPP; detection frequency 36%), followed by components typically found in the Firemaster550 commercial mixture (detection frequency 17%). Five samples contained PBDE congeners commonly associated with PentaBDE, suggesting products with PentaBDE are still in-use. Two chlorinated organophosphate flame retardants (OPFRs) not previously documented in the environment were also identified, one of which is commercially sold as V6 (detection frequency 15%) and contains tris(2-chloroethyl) phosphate (TCEP) as an impurity. As an addition to this study, we used a portable X-ray fluorescence (XRF) analyzer to estimate the bromine and chlorine content of the foam and investigate whether XRF is a useful method for predicting the presence of halogenated flame retardant additives in these products. A significant correlation was observed for bromine; however, there was no significant relationship observed for chlorine. To the authors knowledge, this is the first study to report on flame retardants in baby products. In addition, we have identified two chlorinated OPFRs not previously documented in the environment or in consumer products. Based on exposure estimates conducted by the Consumer Product Safety Commission (CPSC), we predict that infants may receive greater exposure to TDCPP from these products compared to the average child or adult from upholstered furniture, all of which are higher than acceptable daily intake levels of TDCPP set by the CPSC. Future studies are therefore warranted to specifically measure infants exposure to these flame retardants from intimate contact with these products and to determine if there are any associated health concerns.

SUBMITTER: Stapleton HM

PROVIDER: S-EPMC3113369 | biostudies-other | 2011 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

Identification of flame retardants in polyurethane foam collected from baby products.

Stapleton Heather M HM Klosterhaus Susan S Keller Alex A Ferguson P Lee PL van Bergen Saskia S Cooper Ellen E Webster Thomas F TF Blum Arlene A

Environmental science & technology 20110518 12

With the phase-out of PentaBDE in 2004, alternative flame retardants are being used in polyurethane foam to meet flammability standards. However, insufficient information is available on the identity of the flame retardants currently in use. Baby products containing polyurethane foam must meet California state furniture flammability standards, which likely affects the use of flame retardants in baby products throughout the U.S. However, it is unclear which products contain flame retardants and a ...[more]

PMID: 21591615

Similar Datasets

Project description:Tris(1-chloro-2-propyl) phosphate (TCPP, also referenced as TCIPP), a flame retardant used in spray polyurethane foam insulation, increases cell toxicity and affects fetal development. Spray polyurethane foam workers have the potential to be exposed to TCPP during application. In this study, we determined exposure to TCPP and concentrations of the urinary biomarker bis(1-chloro-2-propyl) phosphate (BCPP) among 29 spray polyurethane foam workers over 2 work days. Work was conducted at residential or commercial facilities using both open-cell (low density) and closed-cell (high density) foam. Study participants provided two personal air samples (Day 1 and Day 2), two hand wipe samples (Pre-shift Day 2 and Post-shift Day 2), and two spot urine samples (Pre-shift Day 1 and Post-shift Day 2). Bulk samples of cured spray foam were also analyzed. Sprayers were found to have significantly higher TCPP geometric mean (GM) concentration in personal air samples (87.1 μg/m3), compared to helpers (30.2 μg/m3; p = 0.025). A statistically significant difference was observed between TCPP pre- and post-shift hand wipe GM concentrations (p = 0.004). Specifically, TCPP GM concentration in post-shift hand wipe samples of helpers (106,000 ng/sample) was significantly greater than pre-shift (27,300 ng/sample; p < 0.001). The GM concentration of the urinary biomarker BCPP (23.8 μg/g creatinine) was notably higher than the adult male general population (0.159 μg/g creatinine, p < 0.001). Urinary BCPP GM concentration increased significantly from Pre-shift Day 1 to Post-shift Day 2 for sprayers (p = 0.013) and helpers (p = 0.009). Among bulk samples, cured open-cell foam had a TCPP GM concentration of 9.23% by weight while closed-cell foam was 1.68%. Overall, post-shift BCPP urine concentrations were observed to be associated with TCPP air and hand wipe concentrations, as well as job position (sprayer vs. helper). Spray polyurethane foam workers should wear personal protective equipment including air-supplied respirators, coveralls, and gloves during application.

Project description:Restrictions on the use of polybrominated diphenyl ethers (PBDEs) have resulted in the increased use of alternate flame retardant chemicals to meet flammability standards. However, it has been difficult to determine which chemical formulations are currently being used in high volumes to meet flammability standards since the use of flame retardant formulations in consumer products is not transparent (i.e., not provided to customers). To investigate chemicals being used as replacements for PentaBDE in polyurethane foam, we analyzed foam samples from 26 different pieces of furniture purchased in the United States primarily between 2003 and 2009. Samples included foam from couches, chairs, mattress pads, pillows, and, in one case, foam from a sound-proofing system of a laboratory-grade dust sieve, and were analyzed using gas chromatography mass spectrometry. Fifteen of the foam samples contained the flame retardanttris(1,3-dichloro-2-propyl) phosphate (TDCPP; 1-5% by weight), four samples contained tris(1-chloro-2-propyl) phosphate (TCPP; 0.5 -22% by weight), one sample contained brominated chemicals found in a new flame retardant mixture called Firemaster 550 (4.2% by weight), and one foam sample collected from a futon likely purchased prior to 2004 contained PentaBDE (0.5% by weight). Due to the high frequency of detection of the chlorinated phosphate compounds in furniture foam,we analyzed extracts from 50 house dust samples collected between 2002 and 2007 in the Boston, MA area for TDCPP, TCPP, and another high volume use organophosphate-based flame retardant used in foam, triphenylphosphate (TPP). Detection frequencies for TDCPP and TPP in the dust samples were > 96% and were log normally distributed, similar to observations for PBDEs. TCPP was positively detected in dust in only 24% of the samples, but detection was significantly limited by a coelution problem. The geometric mean concentrations for TCPP, TDCPP, and TPP in house dust were 570, 1890, and 7360 ng/g, respectively, and maximum values detected in dust were 5490, 56,080 and 1,798,000 ng/g, respectively. These data suggest that levels of these organophosphate flame retardants are comparable, or in some cases greater than, levels of PBDEs in house dust. The high prevalence of these chemicals in foam and the high concentrations measured in dust (as high as 1.8 mg/g) warrant further studies to evaluate potential health effects from dust exposure, particularly for children.

Project description:Brominated flame retardants (BFRs) are now ubiquitous contaminants with large reservoirs and high concentrations in buildings. Most of the information documenting BFR levels has been obtained in residences, and other environments that can lead to exposure have received relatively little attention, including offices that contain numerous BFR sources and where individuals spend considerable time. The aim of this study is to characterize BFR concentrations, potential emission sources, and migration pathways in office environments. We measure BFR levels in floor dust, indoor air, ventilation filter dust, and carpets in ten commercial and institutional buildings in Michigan, U.S.A. The median concentration of total BDEs in settled dust was 8754 ng g(-1), at the upper range of levels previously reported. Especially elevated levels were found in offices in buildings that contained known or likely BFR sources, e.g., computer servers. A trends analysis in a newly constructed building showed remarkable increases in concentrations of BFRs in settled dust and indoor air, and apparent steady-state levels were reached 5 to 8 months after building completion, a particularly striking finding given that the building was constructed and furnished several years after the voluntary phase-out of the penta- and octa-mixtures. Airborne particulate matter collected in a building's HVAC system filters contained PBDEs, including BDE-209, at levels exceeding the concentration of floor dust. In conjunction with estimates of building air flow rates, filter efficiency and other parameters, mass balance calculations for this building were used to estimate the emission rates and reservoirs of PBDEs. The widespread distribution of BFRs found in offices in both new and old buildings suggests the significance of workplace exposures, the need for controls to minimize human exposure, intra-building migration, and environmental releases of these chemicals, and the need for monitoring in new buildings to confirm the effectiveness of the PBDE phase-out.

Project description:With the phase-out of polybrominated diphenyl ether (PBDE) flame retardants, the use of new and alternate flame retardants has been increasing. 2,2-bis(chloromethyl)propane-1,3-diyltetrakis(2-chloroethyl) bisphosphate, known as V6, is a flame retardant applied to polyurethane foam commonly found in furniture and automobile foam. However, to the authors' knowledge, no research has been conducted on V6 levels in the environment. The intention of this study was to measure the concentration of V6 in foam collected from baby products where it was recently detected and measure levels in dust samples collected from homes and automobiles in the Boston, MA area. To accomplish this, a pure V6 commercial standard was purchased from a Chinese manufacturer and purified (>98%). An analytical method to measure V6 in dust samples using liquid chromatography tandem mass spectrometry (LC/MS-MS) was developed. Extraction was conducted using accelerated solvent extraction (ASE) and extracts were purified using an ENVI-Florisil SPE column (500 mg, 3 mL). V6 was measured in foam samples collected from baby products with a concentration ranging from 24,500,000 to 59,500,000 ng/g of foam (n = 12, average ± sd: 46,500,000 ± 12,000,000 ng/g; i.e., on average, 4.6% of the foam mass was V6). V6 was also detected in 19 of 20 car dust samples and 14 of 20 house dust samples analyzed. The concentration of V6 in the house dust ranged from <5 ng/g to 1110 ng/g with a median of 12.5 ng/g, and <5 ng/g to 6160 ng/g in the car dust with a median of 103.0 ng/g. Concentrations in car dust were significantly higher than in the house dust potentially indicating higher use of V6 in automobiles compared to products found in the home. Furthermore, tris (2-chloroethyl) phosphate (TCEP), a known carcinogen, was found in the V6 commercial mixture (14% by weight) as an impurity and was consistently detected with V6 in the foam samples analyzed. A significant correlation was also observed between V6 and TCEP in the dust samples suggesting that the use of V6 is a significant source of TCEP in the indoor environment.

Dataset Information

Identification of flame retardants in polyurethane foam collected from baby products.

Publications

Identification of flame retardants in polyurethane foam collected from baby products.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets