Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Absolute backscatter coefficient estimates of tissue-mimicking phantoms in the 5-50 MHz frequency range.

ABSTRACT: Absolute backscatter coefficients in tissue-mimicking phantoms were experimentally determined in the 5-50 MHz frequency range using a broadband technique. A focused broadband transducer from a commercial research system, the VisualSonics Vevo 770, was used with two tissue-mimicking phantoms. The phantoms differed regarding the thin layers covering their surfaces to prevent desiccation and regarding glass bead concentrations and diameter distributions. Ultrasound scanning of these phantoms was performed through the thin layer. To avoid signal saturation, the power spectra obtained from the backscattered radio frequency signals were calibrated by using the signal from a liquid planar reflector, a water-brominated hydrocarbon interface with acoustic impedance close to that of water. Experimental values of absolute backscatter coefficients were compared with those predicted by the Faran scattering model over the frequency range 5-50 MHz. The mean percent difference and standard deviation was 54% ± 45% for the phantom with a mean glass bead diameter of 5.40 μm and was 47% ± 28% for the phantom with 5.16 μm mean diameter beads.

SUBMITTER: McCormick MM

PROVIDER: S-EPMC3190655 | biostudies-other | 2011 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Cross-imaging system comparison of backscatter coefficient estimates from a tissue-mimicking material.

Project description:A key step toward implementing quantitative ultrasound techniques in a clinical setting is demonstrating that parameters such as the ultrasonic backscatter coefficient (BSC) can be accurately estimated independent of the clinical imaging system used. In previous studies, agreement in BSC estimates for well characterized phantoms was demonstrated across different laboratory systems. The goal of this study was to compare the BSC estimates of a tissue mimicking sample measured using four clinical scanners, each providing RF echo data in the 1-15 MHz frequency range. The sample was previously described and characterized with single-element transducer systems. Using a reference phantom for analysis, excellent quantitative agreement was observed across the four array-based imaging systems for BSC estimates. Additionally, the estimates from data acquired with the clinical systems agreed with theoretical predictions and with estimates from laboratory measurements using single-element transducers.

| S-EPMC3460978 | biostudies-other

High-frequency (20-50 MHz) ultrasonography of pseudoxanthoma elasticum skin lesions.

Project description:In most patients pseudoxanthoma elasticum (PXE) manifests with yellowish cutaneous papules and dermal elastorrhexis on skin biopsy. In a small number of cases there are no skin manifestations on clinical examination, and establishing a diagnosis of PXE in such patients is challenging. High-frequency ultrasonography (HFUS) may be of use in predicting skin areas that would yield a biopsy specimen positive for elastorrhexis.To describe characteristics of clinically visible PXE skin using HFUS, and to evaluate its relevance for diagnosis.HFUS was performed in a cohort of patients with PXE and in controls at a referral centre. HFUS images of PXE skin were compared with those of other conditions. Five operators blind-scored multiple HFUS images of photoprotected or photoexposed skin from patients with PXE and controls. The diagnostic indices (sensitivity, specificity, likelihood ratios, interobserver agreement) were calculated.The HFUS changes considered as diagnostic for PXE were primarily oval homogeneous hypoechogenic areas in the mid-dermis. The size of these areas closely matched the extent of the histological changes. The sensitivity and specificity of the diagnostic items and interobserver agreement were high, particularly in photoprotected skin. Dermal hypoechogenicity in PXE could be related to high hydration of connective tissue due to the presence of glycosaminoglycans despite elastic fibre mineralization.HFUS provides suggestive images of PXE skin lesions. HFUS should now be studied to determine whether it is a potentially valuable technique for the noninvasive identification of elastorrhexis in patients with PXE in whom skin involvement is clinically minimal or absent.

| S-EPMC3855177 | biostudies-literature

Ultrasonic backscatter coefficient quantitative estimates from high-concentration Chinese Hamster Ovary cell pellet biophantoms.

Project description:Previous work estimated the ultrasonic backscatter coefficient (BSC) from low-concentration (volume density <3%) Chinese Hamster Ovary (CHO, 6.7-μm cell radius) cell pellets. This study extends the work to higher cell concentrations (volume densities: 9.6% to 63%). At low concentration, BSC magnitude is proportional to the cell concentration and BSC frequency dependency is independent of cell concentration. At high cell concentration, BSC magnitude is not proportional to cell concentration and BSC frequency dependency is dependent on cell concentration. This transition occurs when the volume density reaches between 10% and 30%. Under high cell concentration conditions, the BSC magnitude increases slower than proportionally with the number density at low frequencies (ka<1), as observed by others. However, what is new is that the BSC magnitude can increase either slower or faster than proportionally with number density at high frequencies (ka>1). The concentric sphere model least squares estimates show a decrease in estimated cell radius with number density, suggesting that the concentric spheres model is becoming less applicable as concentration increases because the estimated cell radius becomes smaller than that measured. The critical volume density, starting from when the model becomes less applicable, is estimated to be between 10% and 30% cell volume density.

| S-EPMC3257760 | biostudies-other

Quantitative anatomy mimicking slice phantoms.

Project description:PurposeTo present a reproducible methodology for building an anatomy mimicking phantom with targeted T1 and T2 contrast for use in quantitative magnetic resonance imaging.MethodsWe propose a reproducible method for creating high-resolution, quantitative slice phantoms. The phantoms are created using gels with different concentrations of NiCl2 and MnCl2 to achieve targeted T1 and T2 values. We describe a calibration method for accurately targeting anatomically realistic relaxation pairs. In addition, we developed a method of fabricating slice phantoms by extruding 3D printed walls on acrylic sheets. These procedures are combined to create a physical analog of the Brainweb digital phantom.ResultsWith our method, we are able to target specific T1 /T2 values with less than 10% error. Additionally, our slice phantoms look realistic since their geometries are derived from anatomical data.ConclusionStandardized and accurate tools for validating new techniques across sequences, platforms, and different imaging sites are important. Anatomy mimicking, multi-contrast phantoms designed with our procedures could be used for evaluating, testing, and verifying model-based methods.

| S-EPMC8240669 | biostudies-literature

Nanometrology: Absolute Seebeck coefficient of individual silver nanowires.

Project description:Thermoelectric phenomena can be strongly modified in nanomaterials. The determination of the absolute Seebeck coefficient is a major challenge for metrology with respect to micro- and nanostructures due to the fact that the transport properties of the bulk material are no more valid. Here, we demonstrate a method to determine the absolute Seebeck coefficient S of individual metallic nanowires. For highly pure and single crystalline silver nanowires, we show the influence of nanopatterning on S in the temperature range between 16?K and 300?K. At room temperature, a nanowire diameter below 200?nm suppresses S by 50% compared to the bulk material to less than S?=?1??VK-1, which is attributed to the reduced electron mean free path. The temperature dependence of the absolute Seebeck coefficient depends on size effects. Thermodiffusion and phonon drag are reduced with respect to the bulk material and the ratio of electron-phonon to phonon-phonon interaction is significantly increased.

| S-EPMC6937240 | biostudies-literature

3D-Printed Tissue-Mimicking Phantoms for Medical Imaging and Computational Validation Applications.

Project description:Abdominal aortic aneurysm (AAA) is a permanent, irreversible dilation of the distal region of the aorta. Recent efforts have focused on improved AAA screening and biomechanics-based failure prediction. Idealized and patient-specific AAA phantoms are often employed to validate numerical models and imaging modalities. To produce such phantoms, the investment casting process is frequently used, reconstructing the 3D vessel geometry from computed tomography patient scans. In this study the alternative use of 3D printing to produce phantoms is investigated. The mechanical properties of flexible 3D-printed materials are benchmarked against proven elastomers. We demonstrate the utility of this process with particular application to the emerging imaging modality of ultrasound-based pulse wave imaging, a noninvasive diagnostic methodology being developed to obtain regional vascular wall stiffness properties, differentiating normal and pathologic tissue in vivo. Phantom wall displacements under pulsatile loading conditions were observed, showing good correlation to fluid-structure interaction simulations and regions of peak wall stress predicted by finite element analysis. 3D-printed phantoms show a strong potential to improve medical imaging and computational analysis, potentially helping bridge the gap between experimental and clinical diagnostic tools.

| S-EPMC4981152 | biostudies-literature

Enhanced photoacoustic imaging in tissue-mimicking phantoms using polydopamine-shelled perfluorocarbon emulsion droplets.

Project description:The current work features process parameters for the ultrasound (25 kHz)-assisted fabrication of polydopamine-shelled perfluorocarbon (PDA/PFC) emulsion droplets with bimodal (modes at 100-600 nm and 1-6 µm) and unimodal (200-600 nm) size distributions. Initial screening of these materials revealed that only PDA/PFC emulsion droplets with bimodal distributions showed photoacoustic signal enhancement due to large size of their optically absorbing PDA shells. Performance of this particular type of emulsion droplets as photoacoustic agents were evaluated in Intralipid®-India ink media, mimicking the optical scattering and absorbanceof various tissuetypes. From these measurements, it was observed that PDA/PFC droplets with bimodal size distributions can enhance the photoacoustic signal of blood-mimicking phantom by up to five folds in various tissue-mimicking phantoms with absorption coefficients from 0.1 to 1.0 cm-1. Furthermore, using the information from enhanced photoacoustic images at 750 nm, the ultimate imaging depth was explored for polydopamine-shelled, perfluorohexane (PDA/PFH) emulsion droplets by photon trajectory simulations in 3D using a Monte Carlo approach. Based on these simulations, maximal tissue imaging depths for PDA/PFH emulsion droplets range from 10 to 40 mm, depending on the tissue type. These results demonstrate for the first time that ultrasonically fabricated PDA/PFC emulsion droplets have great potential as photoacoustic imaging agents that can be complemented with other reported characteristics of PDA/PFC emulsion droplets for extended applications in theranostics and other imaging modalities.

| S-EPMC9136156 | biostudies-literature

Evaluating satellite estimates of particulate backscatter in the global open ocean using autonomous profiling floats.

Project description:Satellite retrievals of particulate backscattering (bbp) are widely used in studies of ocean ecology and biogeochemistry, but have been historically difficult to validate due to the paucity of available ship-based comparative field measurements. Here we present a comparison of satellite and in situ bbp using observations from autonomous floats (n?=?2,486 total matchups across three satellites), which provide bbp at 700 nm. With these data, we quantify how well the three inversion products currently distributed by NASA ocean color retrieve bbp. We find that the median ratio of satellite derived bbp to float bbp ranges from 0.77 to 1.60 and Spearman's rank correlations vary from r?=?0.06 to r?=?0.79, depending on which algorithm and sensor is used. Model skill degrades with increased spatial variability in remote sensing reflectance, which suggests that more rigorous matchup criteria and factors contributing to sensor noisiness may be useful to address in future work, and/or that we have built in biases in the current widely distributed inversion algorithms.

| S-EPMC6839783 | biostudies-literature

Reconfigurable Tri-Mode Metasurface for Broadband Low Observation, Wide-Range Tracing, and Backscatter Communication.

Project description:In the current prevalent complex electromagnetic (EM) environment, intelligent methods for versatile and integrated control of EM waves using compact devices are both essential and challenging. These varied wave control objectives can at times conflict with one another, such as the need for broad absorption to remain inconspicuous, while also requiring enhanced backward scattering for highly reliable tracing and secure communication. To address these sophisticated challenges, a microwave-frequency reconfigurable tri-mode metasurface (RTMM) is introduced. The proposed innovation enables three distinct operational modes: broadband low observation, enhanced EM wave tracing, and backscatter communication over a wide-angle range by simple control of the PIN diodes embedded in each meta-atom. The proof-of-concept demonstration of the fabricated prototype verified the switchable tri-mode performance of the RTMM. This proposed RTMM can be adapted to various applications, including EM shielding, target detection, and secure communication in complex and threatening EM environments, paving the way for environmentally-adaptive EM wave manipulation.

| S-EPMC11022728 | biostudies-literature

Benchtop Low-Frequency 60 MHz NMR Analysis of Urine: A Comparative Metabolomics Investigation.

Project description:Metabolomics techniques are now applied in numerous fields, with the ability to provide information concerning a large number of metabolites from a single sample in a short timeframe. Although high-frequency (HF) nuclear magnetic resonance (NMR) analysis represents a common method of choice to perform such studies, few investigations employing low-frequency (LF) NMR spectrometers have yet been published. Herein, we apply and contrast LF and HF 1H-NMR metabolomics approaches to the study of urine samples collected from type 2 diabetic patients (T2D), and apply a comparative investigation with healthy controls. Additionally, we explore the capabilities of LF 1H-1H 2D correlation spectroscopy (COSY) experiments regarding the determination of metabolites, their resolution and associated analyses in human urine samples. T2D samples were readily distinguishable from controls, with several metabolites, particularly glucose, being associated with this distinction. Comparable results were obtained with HF and LF spectrometers. Linear correlation analyses were performed to derive relationships between the intensities of 1D and 2D resonances of several metabolites, and R2 values obtained were able to confirm these, an observation attesting to the validity of employing 2D LF experiments for future applications in metabolomics studies. Our data suggest that LF spectrometers may prove to be easy-to-use, compact and inexpensive tools to perform routine metabolomics analyses in laboratories and 'point-of-care' sites. Furthermore, the quality of 2D spectra obtained from these instruments in half an hour would broaden the horizon of their potential applications.

| S-EPMC7240954 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data