The horizontal and stepped osteotomy technique for mandibular reconstruction using fibular free flap.
Ontology highlight
ABSTRACT:
SUBMITTER: Aleid W
PROVIDER: S-EPMC3193305 | biostudies-other | 2011 Sep
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Osteoradionecrosis is a delayed complication from radiation therapy which causes chronic pain, infection and constant deformity after necrosis. Most of the osteoradionecrosis occurs spontaneously or after the primary oncologic surgery, dental extraction or by trauma of prosthesis. The treatment of osteoradionecrosis relies on both conservative measures and surgical measures. The fibular osteocutaneous free flap has become more popular choice for reconstruction of maxillofacial defects as a treatment of osteoradionecrosis.We presented our experiences from 7 patients with osteoradionecrosis who have had reconstruction surgery with fibular osteocutaneous free flap at National Cancer Center during the recent 5 years. We performed segmental mandibular resection with fibular osteocutaneous free flap for all 7 patients of advanced osteoradionecrosis who were not controlled by conservative treatment such as wound irrigation, debridement, and antibiotics.A wide range of techniques were available for the reconstruction of composite defects resulted from the treatment of advanced mandibular osteoradionecrosis. Significant improvement was noted in relieving pain and treating trismus after the surgery however difficulty in swallowing and xerostomia showed less improvement.We concluded that fibular osteocutaneous free flap can be performed safely in patients with osteoradionecrosis and yields positive outcomes with significantly increased success rate. The fibular osteocutaneous free flap was our preferred choice for the mandibular reconstruction due to its versatility and predictability.
| S-EPMC4322236 | biostudies-literature
Project description:BackgroundReconstruction of mandibular defects following ablative surgery remains a challenge even for experienced surgeons. Virtual planning and guided surgery, including computer-aided design/computer-aided manufacturing (CAD/CAM), afford optimized ways by which to plan complex surgery. This study aimed to evaluate and compare aesthetic outcome and surgical efficiency of free fibular flap (FFF) with and without CAD/CAM customized osteotomy guide (COG) for reconstruction of onco-surgical mandibular defects.MethodsTwenty-two patients indicated for segmental mandibulectomy were randomly assigned to either CAD/CAM with COG group or that without COG- Model based reconstruction (MB group) at a 1:1 ratio. Aesthetic outcomes were evaluated by means of morphometric assessment and comparison for each differential area (DAr) and angle (DAn) in the affected side to the contralateral side of the mandible using computerized digital imaging analysis (CDIA) based on the post-operative 3D CT-scan. Subjective evaluation was performed using the Visual Analogue Scale (VAS) and Patient's Satisfaction Score (PSS). Surgical efficiency was a secondary outcome and evaluated as total operative time and ischemia time.ResultsThe mean sagittal DAr was significantly lower in the COG group (277.28 ± 127.05 vs. 398.67 ± 139.10 mm2, P = 0.045). Although there was an improvement in the axial DAr (147.61 ± 55.42 vs. 183.68 ± 72.85 mm2), the difference was not statistically significant (P = 0.206). The mean differences (Δ) in both sagittal and coronal DAn were significantly lower in the COG group than in the MB group (6.11 ± 3.46 and 1.77 ± 1.12° vs. 9.53 ± 4.17 and 3.44 ± 2.34°), respectively. There were no statistically significant differences in the axial DAn between the two groups (P = 0.386). The PSS was significantly higher in the COG group, reflecting better aesthetic satisfaction than in the MB group (P = 0.041). The total operation and ischemia time were significantly shorter in favor of the COG group with a mean of (562.91 ± 51.22, 97.55 ± 16.80 min vs. 663.55 ± 53.43, 172.45 ± 21.87 min), respectively.ConclusionThe CAD/CAM with COG is more reliable and highly valuable in enhancing aesthetic outcomes and surgical efficiency of mandibular reconstruction by FFF compared to that without COG (MB reconstruction).Trial registrationThis trial was registered at ClinicalTrials.gov .Registration numberNCT03757273. Registration date: 28/11/2018.
| S-EPMC9717507 | biostudies-literature
Project description:In reconstructions of mandibles and condyles, free fibular flaps and metallic condylar heads (CH) are often used after resection. However, in conventional reconstructions, it is difficult to fix the metallic CH on the same preoperative position because the position is determined visually. Therefore, we have made an original computer-aided design and manufacture (CAD/CAM) guide for mandibular condyle reconstruction, combining a metallic CH with a free fibular flap. A 71-year-old woman with gingival carcinoma underwent hemimandibulectomy. We reconstructed the mandible and condyle with a metallic CH and a free fibular flap. We placed a mark on the CAD/CAM guide showing the correct position for fixing the CH to the fibular blocks. We also designed a surface for attaching to the healthy edge of the mandible. The fibular blocks and metallic CH were fixed as 1 unit before separating the flap from the leg and replacing the diseased tissue. Reconstruction was completed by fixing the attachment surface to the healthy side of the mandible. The guide marks solved the difficulty of conventional reconstruction; during surgery, we fixed the metallic CH to the same position as the original bone using these marks. The postoperative deviation of the condyle from the virtual plan was 4.3 mm, whereas the reported deviation of such prostheses was 3.8 mm (range 1.3-6.7); so our guide was acceptably accurate. Furthermore, it appears that the CAD/CAM guide is more useful for reconstruction after hemimandibulectomy including the condyle than after segmental resection without including condyle.
| S-EPMC7544273 | biostudies-literature
Project description:PurposeTo assess the availability, success rate and complications of microvascular iliac crest free flap for reconstruction of mandibular segmental defects.MethodsIn this retrospective-descriptive study, we report patients who had undergone segmental mandibular resection for pathologic lesions and received reconstruction with iliac crest microvascular free flap between 2016 and 2019. Clinical and demographic data of all the cases were collected. Success was regarded as complete consolidation of the bone graft in panoramic radiograph. Postoperative complications were defined as major or minor based on the need for intervention. T-test, Kolomogorov_Smirnov, and multivariate analysis were used and the p-value<0.05 was considered to be statistically significant.ResultsOf all 30 patients, 16 were women and 14 were men with an average age of 27.2 years (range 14-40). Patients were followed for 12-60 month (mean: 38.4). One flap was lost due to unsalvageable venous thrombosis. Six other cases had post-op complications while smoking and diabetes were associated with more complications (P = 0.036). Twenty-three patients received primary reconstruction which was more successful than secondary ones (P = 0.003). Osteogenic sarcoma was associated with greater risk of complications (P < 0.01).ConclusionsThe results of this study suggest that iliac crest microvascular free flap serves as a promising option for the reconstruction of mandibular defects, providing excellent contour and acceptable success rate with low donor site morbidity. Future studies will focus on the role of systemic diseases in post-op complications and flap failures.
| S-EPMC8121997 | biostudies-literature
Project description:In the present study, the reproducibility and postoperative stability of a 3D printed surgical guide were evaluated in mandibular reconstruction with an osteocutaneous free flap (OCFF), including a fibular free flap (FFF) and deep circumflex iliac artery free flap (DCIA). Fifteen patients were enrolled, and a 3D surgical guide was fabricated by simulation surgery using preoperative (T0) Computed tomography (CT) images. Mandibular reconstruction was performed with OCFF using the 3D surgical guide. Postoperative CTs were taken immediately, 1 week (T1), and 6 months (T2) after surgery, to evaluate the reproducibility of the 3D surgical guide and condyle stability. Error of the 3D surgical guide ranged from 0.85 to 2.56 mm. There were no differences in reproducibility according to flap type. Condylar error and error at mandible midpoint were significantly different in FFF. However, there was no difference in DCIA error between the condyle and mandible midpoint. Regarding condyle stability 6 months after surgery, condyles moved more than 2 mm (up to 2.85 mm) in FFF, whereas there were no significant movement in DCIA. Careful intraoperative flap fixation and closed postoperative observation should be considered for stable clinical outcome, especially in the case of FFF.
| S-EPMC7287575 | biostudies-literature
Project description:BackgroundFree osteocutaneous fibula flap (FFF) is currently considered the best option for segmental mandibular reconstruction; however, there are only a few reports comparing secondary with primary reconstructions using FFF. This study aimed to evaluate the safety and efficacy of secondary mandibular reconstruction using FFF when compared with primary mandibular reconstruction.MethodsFrom October 2018 to February 2020, patients who underwent mandibular reconstruction using FFF after segmental mandibulectomy were retrospectively reviewed. The size and location of the mandibular defect, the segment length and number of osteotomies in the fibula, types of the mandibular plating system, kinds and laterality of the recipient vessels were recorded from the surgical notes. Flap survival, duration of nasogastric tube use, and implant installation after reconstruction were recorded as postoperative evaluation indices.ResultsTwelve patients underwent mandibular reconstruction using FFF during the study period. There were no significant differences in demographic characteristics other than body mass index between the primary (n = 8) and secondary (n = 4) reconstruction groups. No significant differences were observed in the size and location of defects, the segment length and number of osteotomies in the fibula, and the types of mandibular plating system. There was no significant difference in the kinds of recipient vessels; however, the laterality of recipient vessels was ipsilateral in all cases of primary reconstructions and contralateral in all cases of secondary reconstructions. Three out of eight patients with primary FFF reconstruction developed partial flap necrosis. Four patients in the secondary FFF reconstruction group achieved complete flap survival. The duration of use of the nasogastric tube and implant installation after reconstruction was comparable between the two groups.ConclusionSafe and effective secondary mandibular reconstruction can be performed in this clinical case study using FFF.
| S-EPMC8035737 | biostudies-literature
Project description:This study was performed to quantitatively analyze medical knowledge of, and experience with, decision-making in preoperative virtual planning of mandibular reconstruction. Three shape descriptors were designed to evaluate local differences between reconstructed mandibles and patients' original mandibles. We targeted an asymmetrical, wide range of cutting areas including the mandibular sidepiece, and defined a unique three-dimensional coordinate system for each mandibular image. The generalized algorithms for computing the shape descriptors were integrated into interactive planning software, where the user can refine the preoperative plan using the spatial map of the local shape distance as a visual guide. A retrospective study was conducted with two oral surgeons and two dental technicians using the developed software. The obtained 120 reconstruction plans show that the participants preferred a moderate shape distance rather than optimization to the smallest. We observed that a visually plausible shape could be obtained when considering specific anatomical features (e.g., mental foramen. mandibular midline). The proposed descriptors can be used to multilaterally evaluate reconstruction plans and systematically learn surgical procedures.
| S-EPMC5008776 | biostudies-literature
Project description:Osteoradionecrosis is the most dreadful complication after head and neck irradiation. Orocutaneous fistula makes patients difficult to eat food. Fibular free flap is the choice of the flap for mandibular reconstruction. Osteocutaneous flap can reconstruct both hard and soft tissues simultaneously. This study was to investigate the success rate and results of the free fibular flap for osteoradionecrosis of the mandible and which side of the flap should be harvested for better reconstruction.A total of eight consecutive patients who underwent fibula reconstruction due to jaw necrosis from March 2008 to December 2015 were included in this study. Patients were classified according to stages, primary sites, radiation dose, survival, and quality of life.Five male and three female patients underwent operation. The mean age of the patients was 60.1 years old. Two male patients died of recurred disease of oral squamous cell carcinoma. The mean dose of radiation was 70.5 Gy. All fibular free flaps were survived. Five patients could eat normal diet after operation; however, three patients could eat only soft diet due to loss of teeth. Five patients reported no change of speech after operation, two reported worse speech ability, and one patient reported improved speech after operation. The ipsilateral side of the fibular flap was used when intraoral soft tissue defect with proximal side of the vascular pedicle is required. The contralateral side of the fibular flap was used when extraoral skin defect with proximal side of the vascular pedicle is required.Osteonecrosis of the jaw is hard to treat because of poor healing process and lack of vascularity. Free fibular flap is the choice of the surgery for jaw bone reconstruction and soft tissue fistula repair. The design and selection of the right or left fibular is dependent on the available vascular pedicle and soft tissue defect sites.
| S-EPMC5122601 | biostudies-literature
Project description:Breast flap remodeling is a common procedure after breast reconstruction. We present a unique approach to breast reduction using a superomedial pedicle inverted "T" technique in patients with previous free deep inferior epigastric perforator (DIEP) flap breast reconstruction, not previously reported. Breast reduction can be a valid option for reshaping breasts after free DIEP flap reconstruction. Breast reduction using the superomedial pedicle inverted T technique is performed in patients who have undergone free DIEP flap breast reconstruction. The superomedial pedicle inverted T breast reduction technique in breast reconstruction with free DIEP flaps seems promising, as the reduced DIEP flaps survived. The superomedial pedicle inverted T breast reduction technique in breast reconstruction with free DIEP flaps offers a good option for secondary breast reshaping. Preservation of the pedicle and blood supply are potential advantages. However, the limited evidence and surgical expertise needed are important considerations. This technique shows promise for breast reductions after free DIEP flap breast reconstruction.
| S-EPMC11357691 | biostudies-literature
Project description:Infection of the sternoclavicular joint (SCJ) is rare and often missed at early stage. In extensive disease with bony and soft tissue destruction, radical excision is indicated. The loss of SCJ results in exposure of vital structures of the anterior mediastinum and instability of the shoulder girdle. SCJ reconstruction using locoregional muscle flaps like the pectoralis major or latissimus dorsi flap has been well described. While these options can provide soft tissue coverage, they do not restore the structural framework of the SCJ which is important for shoulder excursion and chest wall movement. We describe a case of SCJ reconstruction using a free vascularized fibular flap following the resection of sternoclavicular tubercular osteomyelitis. The fibula bone was used to restore the clavicular strut by anchoring it to the remaining manubrium with a steel wire and by plating the lateral end to the remnant clavicle. The steel wire served as a "defunctioning" cerclage that allowed motion of the joint to induce fibrous union. A strict post-operative rehabilitation protocol keeping the shoulder adducted at the initial phase was prescribed. At one year follow up, the patient achieved good shoulder function with 140 degrees of shoulder abduction and 110 degrees flexion.
| S-EPMC7061573 | biostudies-literature