Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrotaxis of lung cancer cells in ordered three-dimensional scaffolds.

ABSTRACT: In this paper, we report a new method to incorporate 3D scaffold with electrotaxis measurement in the microfluidic device. The electrotactic response of lung cancer cells in the 3D foam scaffolds which resemble the in vivo pulmonary alveoli may give more insight on cellular behaviors in vivo. The 3D scaffold consists of ordered arrays of uniform spherical pores in gelatin. We found that cell morphology in the 3D scaffold was different from that in 2D substrate. Next, we applied a direct current electric field (EF) of 338 mV/mm through the scaffold for the study of cells' migration within. We measured the migration directedness and speed of different lung cancer cell lines, CL1-0, CL1-5, and A549, and compared with those examined in 2D gelatin-coated and bare substrates. The migration direction is the same for all conditions but there are clear differences in cell morphology, directedness, and migration speed under EF. Our results demonstrate cell migration under EF is different in 2D and 3D environments and possibly due to different cell morphology and/or substrate stiffness.

SUBMITTER: Sun YS

PROVIDER: S-EPMC3267495 | biostudies-other | 2012 Mar

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Differentiation of human embryonic stem cells on three-dimensional polymer scaffolds.

Project description:Human embryonic stem (hES) cells hold promise as an unlimited source of cells for transplantation therapies. However, control of their proliferation and differentiation into complex, viable 3D tissues is challenging. Here we examine the use of biodegradable polymer scaffolds for promoting hES cell growth and differentiation and formation of 3D structures. We show that complex structures with features of various committed embryonic tissues can be generated, in vitro, by using early differentiating hES cells and further inducing their differentiation in a supportive 3D environment such as poly(lactic-co-glycolic acid)/poly(L-lactic acid) polymer scaffolds. We found that hES cell differentiation and organization can be influenced by the scaffold and directed by growth factors such as retinoic acid, transforming growth factor beta, activin-A, or insulin-like growth factor. These growth factors induced differentiation into 3D structures with characteristics of developing neural tissues, cartilage, or liver, respectively. In addition, formation of a 3D vessel-like network was observed. When transplanted into severe combined immunodeficient mice, the constructs continue to express specific human proteins in defined differentiated structures and appear to recruit and anastamose with the host vasculature. This approach provides a unique culture system for addressing questions in cell and developmental biology, and provides a potential mechanism for creating viable human tissue structures for therapeutic applications.

| S-EPMC240688 | biostudies-literature

Engineered Three-Dimensional Scaffolds Modulating Fate of Breast Cancer Cells Using Stiffness and Morphology Related Cell Adhesion.

Project description:Goal: Artificially engineering the tumor microenvironment in vitro as a vital tool for understanding the mechanism of tumor progression. In this study, we developed three-dimensional cell scaffold systems with different topographical features and mechanical properties but similar surface chemistry. The cell behavior was modulated by the topography and mechanical properties of the scaffold. Methods: Adenocarcinoma (MCF7), triple-negative (MDA-MB-231) and premalignant (MCF10AneoT) breast cancer cells were seeded on the scaffold systems. The cell viability, cell-cell interaction and cell-matrix interactions were analyzed. The preferential growth and alignment of specific population of cells were demonstrated. Results: Among the different scaffolds, triple-negative breast cancer cells preferred honeycomb scaffolds while adenocarcinoma cells favored mesh scaffolds and premalignant cells preferred the aligned scaffolds. Conclusions: The 3D model system developed here can be used to support growth of only specific cell populations or for the growth of tumors. This model can be used for understanding the topographical and mechanical features affecting tumorigenesis, cancer cell growth and migration behavior of malignant and metastatic cancer cells.

| S-EPMC8979620 | biostudies-literature

Ordered three-dimensional interconnected nanoarchitectures in anodic porous alumina.

Project description:Three-dimensional (3D) nanostructures combine properties of nanoscale materials with the advantages of being macro-sized pieces when the time comes to manipulate, measure their properties or make a device. However, the amount of compounds with the ability to self-organize in ordered 3D nanostructures is limited. Therefore, template-based fabrication strategies become the key approach towards 3D nanostructures. Here we report the simple fabrication of a template based on anodic aluminium oxide, having a well-defined, ordered, tunable, homogeneous 3D nanotubular network in the sub 100-nm range. The 3D templates are then employed to achieve 3D, ordered nanowire networks in Bi2Te3 and polystyrene. Finally, we demonstrate the photonic crystal behaviour of both the template and the polystyrene 3D nanostructure. Our approach may establish the foundations for future high-throughput, cheap, photonic materials and devices made of simple commodity plastics, metals and semiconductors.

| S-EPMC4770565 | biostudies-literature

Src-mediated morphology transition of lung cancer cells in three-dimensional organotypic culture.

Project description:A fribotic tumor microenvironment promotes progression of cancer. In this study, we utilize a reconstituted basement membrane mimics Matrigel based three-dimensional organotypic culture (rBM 3-D) to investigate the mechanisms that mediate the tumor promoting effects of the fibrogenic mediators TGF-?1 and type I collagen (Col-1) on lung adenocarcinoma cells. Similar to normal alveolar epithelial cells, the well-differentiated lung adenocarcinoma cells in rBM 3-D culture undergo acinar morphogeneis that features polarized epithelial cell spheres with a single central lumen. Either TGF-?1 or Col-1 modestly distorts acinar morphogenesis. On the other hand, TGF-?1 and Col-1 synergistically induce a transition from acinar morphology into stellate morphology that is characteristic of invasive and metastatic cancer cells. Inhibition of the Src kinase activity abrogates induction of stellate morphology, activation of Akt and mTOR, and the expression of tumor promoting genes by TGF-?1 and Col-1. To a similar extent, pharmacological inhibition of mTOR abrogates the cellular responses to TGF-?1 and Col-1. In summary, we demonstrate that TGF-?1 and Col-1 promote stellate morphogenesis of lung cancer cells. Our findings further suggest that the Src-Akt-mTOR axis mediates stellate morphogenesis. These findings also indicate that rBM 3-D culture can serve as an ideal platform for swift and cost-effective screening of therapeutic candidates at the interface of the tumor and its microenvironment.

| S-EPMC3626791 | biostudies-literature

Three-dimensional growth of iPS cell-derived smooth muscle cells on nanofibrous scaffolds.

Project description:Induced pluripotent stem cells (iPSCs) have been considered as the major component for personalized regenerative medicine. However, the potential of iPSCs in constructing tissue-engineered (TE) blood vessels has not been exploited. In the present study, we generated mouse iPSCs with the combination of over-expression of 4 iPS factors and knock-down of p53 gene. The established iPSCs were then directed to differentiate into smooth muscle cells (SMCs) with the treatment of 10(-5) (M) all-trans retinoid acid (RA). The vehicle dimethyl sulfoxide (DMSO) treatment served as a spontaneous differentiation control. The differentiated cells were then cultured on three-dimensional (3D) macro-porous nanofibrous (NF) poly(L-lactide) (PLLA) scaffolds in vitro. Our data showed that the expression of SMC specific marker genes, including myocardin, smoothelin, SM22? and SMMHC, were higher for the group induced by RA than for the group treated by DMSO, while pluripotent marker gene expression was repressed by the RA-treatment. Upon subcutaneous implantation, the implanted cells maintained the SMC phenotype. In conclusion, the data suggest that iPSCs-derived SMCs can be an important cell source for personalized vascular tissue engineering applications.

| S-EPMC3085599 | biostudies-literature

Two dimensional and extracellular matrix based three-dimensional cultures of lung and breast cancer cells

Project description:This SuperSeries is composed of the SubSeries listed below.

2019-05-02 | GSE130591 | GEO

Resilient three-dimensional ordered architectures assembled from nanoparticles by DNA.

Project description:Rapid developments of DNA-based assembly methods provide versatile capabilities in organizing nanoparticles (NPs) in three-dimensional (3D) organized nanomaterials, which is important for optics, catalysis, mechanics, and beyond. However, the use of these nanomaterials is often limited by the narrow range of conditions in which DNA lattices are stable. We demonstrate here an approach to creating an inorganic, silica-based replica of 3D periodic DNA-NP structures with different lattice symmetries. The created ordered nanomaterials, through the precise 3D mineralization, maintain the spatial topology of connections between NPs by DNA struts and exhibit a controllable degree of the porosity. The formed silicated DNA-NP lattices exhibit excellent resiliency. They are stable when exposed to extreme temperatures (>1000°C), pressures (8 GPa), and harsh radiation conditions and can be processed by the conventional nanolithography methods. The presented approach allows the use of a DNA assembly strategy to create organized nanomaterials for a broad range of operational conditions.

| S-EPMC7978426 | biostudies-literature

Transcriptomic analysis of naïve human embryonic stem cells cultured in three-dimensional PEG scaffolds

Project description:Naïve human embryonic stem cells (ESCs) are characterized by improved viability, proliferation, and differentiation capacity in comparison to traditionally derived primed human ESCs. However, currently used two-dimensional (2-D) cell culture techniques fail to mimic the three-dimensional (3-D) in vivo microenvironment, altering morphological and molecular characteristics of ESCs. Here, we describe the use of 3-D self-assembling scaffolds that support growth and maintenance of the naïve state characteristics of ESC line, Elf1. Scaffolds were formed via a Michael addition reaction upon combination of two 8-arm polyethylene glycol (PEG) polymers functionalized with thiol (PEG-8-SH) and acrylate (PEG-8-Acr) end groups. 3-D scaffold environment maintained the naïve state and supported long-term growth of ESCs. RNA-sequencing demonstrated significant changes in gene expression profiles between 2-D and 3-D grown cells. Gene Ontology analysis revealed upregulation of biological processes involved in the regulation of transcription and translation, extracellular matrix organization, and chromatin remodeling in 3-D grown cells. 3-D culture conditions also induced upregulation of genes associated with Wnt and focal adhesion signaling, while p53 signaling pathway associated genes were downregulated. Our findings for the first time provide insight into the possible mechanisms of self-renewal of naïve ESCs stimulated by the transduction of mechanical signals from the 3-D microenvironment.

2021-02-01 | GSE161306 | GEO

Transcriptomic Analysis of Naive Human Embryonic Stem Cells Cultured in Three-Dimensional PEG Scaffolds.

Project description:Naïve human embryonic stem cells (ESCs) are characterized by improved viability, proliferation, and differentiation capacity in comparison to traditionally derived primed human ESCs. However, currently used two-dimensional (2-D) cell culture techniques fail to mimic the three-dimensional (3-D) in vivo microenvironment, altering morphological and molecular characteristics of ESCs. Here, we describe the use of 3-D self-assembling scaffolds that support growth and maintenance of the naïve state characteristics of ESC line, Elf1. Scaffolds were formed via a Michael addition reaction upon the combination of two 8-arm polyethylene glycol (PEG) polymers functionalized with thiol (PEG-8-SH) and acrylate (PEG-8-Acr) end groups. 3-D scaffold environment maintained the naïve state and supported the long-term growth of ESCs. RNA-sequencing demonstrated significant changes in gene expression profiles between 2-D and 3-D grown cells. Gene ontology analysis revealed upregulation of biological processes involved in the regulation of transcription and translation, extracellular matrix organization, and chromatin remodeling in 3-D grown cells. 3-D culture conditions also induced upregulation of genes associated with Wnt and focal adhesion signaling, while p53 signaling pathway associated genes were downregulated. Our findings, for the first time, provide insight into the possible mechanisms of self-renewal of naïve ESCs stimulated by the transduction of mechanical signals from the 3-D microenvironment.

| S-EPMC7824559 | biostudies-literature

Engineered Fibrillar Fibronectin Networks as Three-Dimensional Tissue Scaffolds.

Project description:Extracellular matrix (ECM) proteins, and most prominently, fibronectin (Fn), are routinely used in the form of adsorbed pre-coatings in an attempt to create a cell-supporting environment in both two- and three-dimensional cell culture systems. However, these protein coatings are typically deposited in a form which is structurally and functionally distinct from the ECM-constituting fibrillar protein networks naturally deposited by cells. Here, the cell-free and scalable synthesis of freely suspended and mechanically robust three-dimensional (3D) networks of fibrillar fibronectin (fFn) supported by tessellated polymer scaffolds is reported. Hydrodynamically induced Fn fibrillogenesis at the three-phase contact line between air, an Fn solution, and a tessellated scaffold microstructure yields extended protein networks. Importantly, engineered fFn networks promote cell invasion and proliferation, enable in vitro expansion of primary cancer cells, and induce an epithelial-to-mesenchymal transition in cancer cells. Engineered fFn networks support the formation of multicellular cancer structures cells from plural effusions of cancer patients. With further work, engineered fFn networks can have a transformative impact on fundamental cell studies, precision medicine, pharmaceutical testing, and pre-clinical diagnostics.

| S-EPMC6851443 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data