Onyx (Ethylene-vinyl Alcohol Copolymer) in Peripheral Applications.
Ontology highlight
ABSTRACT:
SUBMITTER: Guimaraes M
PROVIDER: S-EPMC3312165 | biostudies-other | 2011 Sep
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Ethylene vinyl alcohol copolymer (EVAL) membrane has great potential for applications in protein separation and purification, but the uncontrollable distribution of grafting location when membranes are modified by the grafting method limits the membrane performance. Herein, an effective strategy for controlling the distribution of grafting location was designed to fabricate a high-performance EVAL membrane via photografting. The UV intensity through the membranes was weakened when the local concentration of the photoinitiator benzophenone (BP) on the topside of the membrane increased; thus, the grafting location inside the EVAL membrane changed from homogenous to asymmetric distribution based on the UV absorbability of BP. The grafting inside the membrane pores can be promoted when the loose and porous surface of the EVAL membrane was used as the UV-facing side. More importantly, the varied distribution of grafting location played different roles on improving the membrane performance. For protein binding, the limited convection in the membrane bed was avoided, and the desorption efficiency could be improved when the grafting location enriched inside the membrane pores. For protein filtration, the antifouling properties of the EVAL membrane were enhanced when the grafting location enriched on the topside. This research offers a novel approach to achieve controllable grafting location distribution of membranes and provides a perspective to design the high-performance EVAL membranes for protein separation.
| S-EPMC6648286 | biostudies-literature
Project description:N-butyl 2-cyanoacrylate (NBCA) remains the standard embolic agent for spinal dural arteriovenous fistula (SDAVF) treatment. Treatment of SDAVF with ethylene-vinyl alcohol copolymer (Onyx, ev3-Covidien, Irvine CA, USA) is currently not well established. Although several cases have reported the use of Onyx to embolize an intracranial dural arteriovenous fistula using a dual-lumen microballoon catheter, Onyx embolization of an SDAVF using a dual-lumen microballoon catheter has not been reported.We treated a 57-year-old man with an SDAVF using a dual-lumen microballoon catheter and buddy wire technique to perform transarterial Onyx embolization via the left sixth intercostal artery.Onyx embolization using a dual-lumen microballoon catheter was effective. Furthermore, the buddy wire technique was useful for providing rigid support of the microcatheter in a narrow and tortuous intercostal artery.
| S-EPMC5551288 | biostudies-other
Project description:An organic triazine charring agent hybrid with zinc oxide (OTCA@ZnO) was prepared and well characterized through Fourier transform infrared spectrometry (FTIR), solid-state nuclear magnetic resonance (SSNMR), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). The flame retardancy and thermal behaviour of intumescent flame retardant ethylene-vinyl acetate (EVA) composites combining OTCA@ZnO and ammonium polyphosphate (APP) were investigated using limited oxygen index (LOI), UL-94 vertical burning, cone calorimetry and TGA. The structure and morphology of chars were investigated by scanning electron microscopy (SEM), FTIR, laser Raman spectroscopy analysis (LRS) and X-ray photoelectron spectroscopy (XPS). Results revealed that OTCA@ZnO exhibited excellent thermal stability and dispersity after hybridization. The flame retardancy and smoke suppression properties of EVA were significantly improved by introducing APP/OTCA@ZnO. TGA results indicated that APP/OTCA@ZnO presented an excellent synergistic effect and promoted the char formation of EVA composites. Residue analysis results showed more char with high quality connected by richer P-O-C, P-N and P-O-Si structures was formed in APP/OTCA@ZnO system than APP/HOTCA/ZnO system, which consequently suppressed more efficiently the combustion and smoke production due to the in situ catalytic carbonization effect of hybrid.
| S-EPMC6458352 | biostudies-literature
Project description:In recent years, all-inorganic cesium lead halide perovskite quantum dots have emerged as promising candidates for various optoelectronic applications, including sensors, light-emitting diodes, and solar cells, owing to their exceptional photoelectric properties. However, their commercial utilization has been limited by stability issues. In this study, we addressed this challenge by passivating the surface defects of CsPbBr3 quantum dots using indium acetate, a metal-organic compound. The resulting CsPbBr3 quantum dots exhibited not only high photoluminescence intensity, but also a remarkably narrow half-peak width of 19 nm. Furthermore, by embedding the CsPbBr3 quantum dots in ethylene-vinyl acetate, we achieved stretchability and significantly enhanced stability while preserving the original luminous intensity. The resulting composite film demonstrated the potential to improve the power conversion efficiency of crystalline silicon solar cells and enabled the creation of excellent white light-emitting diodes with coordinates of (0.33, 0.31). This co-passivation strategy, involving surface passivation and polymer packaging, provides a new idea for the practical application of CsPbBr3 quantum dots.
| S-EPMC10575095 | biostudies-literature
Project description:A pH-sensitive amphiphilic polymer based on poly(vinyl alcohol) (PVA), modified with poly(ethylene glycol) (PEG) and adamantane (Ad) pendant groups, has been synthesized and the self-assembly properties of this PEG-PVA-Ad construct investigated. PEG-PVA-Ad polymer forms micelles via self-assembly at concentrations as low as 26 mg L-1. These polymer micelles can be destroyed by low pH or the addition of ?-CD.
| S-EPMC6906925 | biostudies-literature
Project description:This paper discusses the structure morphology and the thermal and swelling behavior of physically crosslinked hydrogels, obtained from applying four successive freezing-thawing cycles to poly (vinyl alcohol) blended with various amounts of ?-carrageenan. The addition of carrageenan in a weight ratio of 0.5 determines a twofold increase in the swelling degree and the early diffusion coefficients of the hydrogels when immersed in distilled water, due to a decrease in the crystallinity of the polymer matrix. The diffusion of water into the polymer matrix could be considered as a relaxation-controlled transport (anomalous diffusion). The presence of the sulfate groups determines an increased affinity of the hydrogels towards crystal violet cationic dye. A maximum physisorption capacity of up to 121.4 mg/g for this dye was attained at equilibrium.
| S-EPMC7182908 | biostudies-literature
Project description:Highly filled biocomposites may be used as biodegradable masterbatches that manufacturers add to traditional polymers for making plastic goods more biodegradable. Biocomposites based on various trademarks of ethylene-vinyl acetate copolymer (EVA) and natural vegetable fillers (wood flour and microcrystalline cellulose) were studied. The EVA trademarks differed both in terms of the melt flow index and in the content of vinyl acetate groups. The composites were created as superconcentrates (or masterbatches) for the production of biodegradable materials based on vegetable fillers with polyolefin matrices. The filler content in biocomposites was 50, 60, 70 wt.%. The influence of the content of vinyl acetate in the copolymer and its melt flow index on the physico-mechanical and rheological properties of highly filled biocomposites was evaluated. As a result, one EVA trademark with high molecular weight that has a high content of VA was chosen because of its optimal parameters for creating highly filled composites with natural fillers.
| S-EPMC10304730 | biostudies-literature
Project description:Ethylene-vinyl acetate copolymer (EVA), a crucial elastomeric resin, finds extensive application in the footwear industry. Conventional chemical foaming agents, including azodicarbonamide and 4,4'-oxybis(benzenesulfonyl hydrazide), have been identified as environmentally problematic. Hence, this study explores the potential of physical foaming of EVA using supercritical nitrogen as a sustainable alternative, garnering considerable interest in both academia and industry. The EVA formulations and processing parameters were optimized and EVA foams with densities between 0.15 and 0.25 g/cm3 were produced. Key findings demonstrate that physical foaming not only reduces environmental impact but also enhances product quality by a uniform cell structure with small cell size (50-100 μm), a wide foaming temperature window (120-180 °C), and lower energy consumption. The research further elucidates the mechanisms of cell nucleation and growth within the crosslinked EVA network, highlighting the critical role of blowing agent dispersion and localized crosslinking around nucleated cells in defining the foam's cellular morphology. These findings offer valuable insights for producing EVA foams with a more controllable cellular structure, utilizing physical foaming techniques.
| S-EPMC11313140 | biostudies-literature
Project description:A facile functionalization method of poly(ethylene-co-vinyl alcohol) (EVOH) nanofiber meshes was demonstrated by utilizing the benzoxaborole-diol interaction between EVOH and benzoxaborole-based copolymers (BOP). EVOH and BOP were firstly mixed to prepare the quasi-gel-state solution with enough viscosity for electro-spinning. The fiber morphology was controlled via changing the mixing ratio of EVOH and BOP. The prepared EVOH/BOP nanofiber mesh showed good stability in aqueous solution. Over 97% of the nanofibers remained after the immersion test for 24 h in acid or alkali aqueous solutions without changing their morphology. Temperature and pH-responsive moieties were copolymerized with BOP, and cationic dye was easily immobilized into the nanofiber mesh via an electrostatic interaction. Therefore, the proposed functionalization technique is possible to perform on multi-functionalized molecule-incorporated nanofibers that enable the fibers to show the environmental stimuli-responsive property for the further applications of the EVOH materials.
| S-EPMC6432579 | biostudies-literature
Project description:Two natural polymers, i.e., cellulose and water soluble pullulan, have been selectively oxidized employing the TEMPO-mediated protocol, to allow the introduction of C6-OOH groups. Thereafter, the composite hydrogels of poly(vinyl alcohol) (PVA) and different content of the oxidized polysaccharides were prepared by the freezing/thawing method. The Fourier transform infrared spectroscopy (FTIR) has been used to discuss the degree of interaction between the hydrogels constituents into the physical network. The homogeneity of the prepared hydrogels as revealed by the SEM show an excellent distribution of the oxidized polysaccharides inside the PVA matrix. The samples exhibit self-healing features, since they quickly recover the initial structure after being subjected to a large deformation. The cell viability was performed for the selected hydrogels, all of them showing promising results. The samples are able to load L-arginine both by physical phenomena, such as diffusion, and also by chemical phenomena, when imine-type bonds are likely to be formed. The synergism between the two constituents, PVA and oxidized polysaccharides, into the physical network, propose these hydrogels for many other biomedical applications.
| S-EPMC6539012 | biostudies-literature