Effect of binding on escape from cavity through narrow tunnel.
Ontology highlight
ABSTRACT:
SUBMITTER: Berezhkovskii AM
PROVIDER: S-EPMC3327272 | biostudies-other | 2012 Mar
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The mean lifetime of a particle diffusing in a cylindrical cavity with a circular absorbing spot on the cavity wall is studied analytically as a function of the spot radius, its location on the wall, the particle initial position, and the cavity shape determined by its length and radius. When the spot radius tends to zero our formulas for the mean lifetime reduce to the result given by the solution of the narrow escape problem, according to which the mean lifetime is proportional to the ratio of the cavity volume to the spot radius and is independent of the cavity shape, the spot location on the cavity wall, and the particle starting point, assuming that this point is not too close to the spot. When the spot radius is not small enough, the asymptotic narrow escape formula for the mean lifetime fails, and one should use more general formulas derived in the present study. To check the accuracy and to establish the range of applicability of the formulas, we compare our theoretical predictions with the results of Brownian dynamics simulations.
| S-EPMC3537821 | biostudies-other
Project description:The study of the diffusive motion of ions or molecules in confined biological microdomains requires the derivation of the explicit dependence of quantities, such as the decay rate of the population or the forward chemical reaction rate constant on the geometry of the domain. Here, we obtain this explicit dependence for a model of a Brownian particle (ion, molecule, or protein) confined to a bounded domain (a compartment or a cell) by a reflecting boundary, except for a small window through which it can escape. We call the calculation of the mean escape time the narrow escape problem. This time diverges as the window shrinks, thus rendering the calculation a singular perturbation problem. Here, we present asymptotic formulas for the mean escape time in several cases, including regular domains in two and three dimensions and in some singular domains in two dimensions. The mean escape time comes up in many applications, because it represents the mean time it takes for a molecule to hit a target binding site. We present several applications in cellular biology: calcium decay in dendritic spines, a Markov model of multicomponent chemical reactions in microdomains, dynamics of receptor diffusion on the surface of neurons, and vesicle trafficking inside a cell.
| S-EPMC1994903 | biostudies-other
Project description:The mouse anterior-posterior (A-P) axis polarization is preceded by formation of the distal visceral endoderm (DVE). However, the mechanism of the emergence of DVE cells is not well understood. Here, we show by in vitro culturing of embryos immediately after implantation in micro-fabricated cavities (narrow; 90 micro-meter, wide; 180 miro-meter in diameter) that the external mechanical cues exerted on the embryo, i.e. cultured in the narrow cavity, are crucial for DVE formation as well as elongated egg cylinder shape. This implies that these developmental events immediately after implantation are not simply embryo-autonomous processes but require extrinsic mechanical factors. Further whole genome-wide gene expression profiles with DNA microarray revealed that no significant difference of transcripts were evident with or without mechanical cues except DVE-related markers. Thus, we propose that external mechanical cues rather than not specific molecular pathways can trigger the establishment of the A-P axis polarization, which is one of the fundamental proccesses of mammalian embryogenesis.
2013-09-27 | GSE51198 | GEO
Project description:The mouse anterior-posterior (A-P) axis polarization is preceded by formation of the distal visceral endoderm (DVE). However, the mechanism of the emergence of DVE cells is not well understood. Here, we show by in vitro culturing of embryos immediately after implantation in micro-fabricated cavities (narrow; 90 micro-meter, wide; 180 miro-meter in diameter) that the external mechanical cues exerted on the embryo, i.e. cultured in the narrow cavity, are crucial for DVE formation as well as elongated egg cylinder shape. This implies that these developmental events immediately after implantation are not simply embryo-autonomous processes but require extrinsic mechanical factors. Further whole genome-wide gene expression profiles with DNA microarray revealed that no significant difference of transcripts were evident with or without mechanical cues except DVE-related markers. Thus, we propose that external mechanical cues rather than not specific molecular pathways can trigger the establishment of the A-P axis polarization, which is one of the fundamental proccesses of mammalian embryogenesis. To identify the differences between the embryos cultured with or without external mechanical cues, we collected mouse embryos at E5.0 and cultured in the narrow (90 micro-meter in diameter) or the wide (180 micro-meter in diameter) cavities for 8 hours for RNA extraction and hybridization on Affymetrix microarrays. Arrays were performed using Affymetrix mouse Gene 1.0 ST arrays. Analysis was performed on three biological replicates of the mouse embryos cultured in the narrow and wide cavities for 8 hours.
2013-09-27 | E-GEOD-51198 | biostudies-arrayexpress
Project description:We demonstrate the first electrically injected AlGaN-based ultraviolet-B resonant-cavity light-emitting diode (RCLED). The devices feature dielectric SiO2/HfO2 distributed Bragg reflectors enabled by tunnel junctions (TJs) for lateral current spreading. A highly doped n++-AlGaN/n++-GaN/p++-AlGaN TJ and a top n-AlGaN current spreading layer are used as transparent contacts, resulting in a good current spreading up to an active region mesa diameter of 120 μm. To access the N-face side of the device, the substrate is removed by electrochemically etching a sacrificial n-AlGaN layer, leading to a smooth underetched surface without evident parasitic etching in the n- and n++-doped layers of the device. The RCLEDs show a narrow emission spectrum with a full width at half-maximum (FWHM) of 4.3 nm compared to 9.4 nm for an ordinary LED and a more directional emission pattern with an angular FWHM of 52° for the resonance at 310 nm in comparison to ∼126° for an LED. Additionally, the RCLEDs show a much more stable emission spectrum with temperature with a red-shift of the electroluminescence peak of about ∼18 pm/K and a negligible change of the FWHM compared to LEDs, which shift ∼30 pm/K and show spectrum broadening with temperature. The demonstration of those devices, where a highly reflective mirror is spatially separated from an ohmic metal contact, opens up a new design space to potentially increase the poor light extraction efficiency in UV LEDs and is an important step toward electrically injected UV vertical-cavity surface-emitting lasers.
| S-EPMC11342380 | biostudies-literature
Project description:Organic electronics is emerging for large-area applications such as photovoltaic cells, rollable displays or electronic paper. Its future development and integration will require a simple, low-power organic memory, that can be written, erased and readout electrically. Here we demonstrate a non-volatile memory in which the ferroelectric polarisation state of an organic tunnel barrier encodes the stored information and sets the readout tunnel current. We use high-sensitivity piezoresponse force microscopy to show that films as thin as one or two layers of ferroelectric poly(vinylidene fluoride) remain switchable with low voltages. Submicron junctions based on these films display tunnel electroresistance reaching 1,000% at room temperature that is driven by ferroelectric switching and explained by electrostatic effects in a direct tunnelling regime. Our findings provide a path to develop low-cost, large-scale arrays of organic ferroelectric tunnel junctions on silicon or flexible substrates.
| S-EPMC4857482 | biostudies-literature
Project description:To achieve high sensitivity and multi-mode sensing characteristics based on the plasmon effect, we explored a high-sensitivity refractive index sensor structure with narrow linewidth and high absorption characteristics based on theoretical analysis. The sensor structure is composed of periodic asymmetric ring cavity array, spacer layer and metal thin-film layer. The reflection spectrum of this structure shows six resonance modes in the wavelength range from visible to near-infrared. The sensor performance was optimized based on the change of the sensor structure parameters combining the simulation data, and the results shown that this kind of asymmetric laminated structure sensor has good sensing performance. In theory, it can be combined with microfluidic technology to achieve sensing detection of diverse test samples, multi-mode and multi-component, which has great potential in the field of biosensing.
| S-EPMC7865613 | biostudies-literature
Project description:Influenza virus can escape most antibodies with single mutations. However, rare antibodies broadly neutralize many viral strains. It is unclear how easily influenza virus might escape such antibodies if there was strong pressure to do so. Here, we map all single amino-acid mutations that increase resistance to broad antibodies to H1 hemagglutinin. Our approach not only identifies antigenic mutations but also quantifies their effect sizes. All antibodies select mutations, but the effect sizes vary widely. The virus can escape a broad antibody to hemagglutinin's receptor-binding site the same way it escapes narrow strain-specific antibodies: via single mutations with huge effects. In contrast, broad antibodies to hemagglutinin's stalk only select mutations with small effects. Therefore, among the antibodies we examine, breadth is an imperfect indicator of the potential for viral escape via single mutations. Antibodies targeting the H1 hemagglutinin stalk are quantifiably harder to escape than the other antibodies tested here.
| S-EPMC5895760 | biostudies-literature
Project description:The influence of the magnetization configuration on Kondo effect in magnetic tunnel junction is investigated. In the parallel configuration, an additional resistance contribution (R*) below 40 K exhibits a logarithmic temperature dependence, indicating the presence of Kondo effect. However, in the anti-parallel configuration, the Kondo-effect-associated spin-flip scattering has a nontrivial contribution to the tunneling current, which compensates the reduction of the current directly caused by Kondo scattering, making R* disappear. These results indicate that suppression and restoration of Kondo effect can be experimentally achieved by altering the magnetization configuration, enhancing our understanding of the role of Kondo effect in spin-dependent transport.
| S-EPMC5497476 | biostudies-other
Project description:The rectification of electromagnetic waves to direct currents is a crucial process for energy harvesting, beyond-5G wireless communications, ultra-fast science, and observational astronomy. As the radiation frequency is raised to the sub-terahertz (THz) domain, ac-to-dc conversion by conventional electronics becomes challenging and requires alternative rectification protocols. Here, we address this challenge by tunnel field-effect transistors made of bilayer graphene (BLG). Taking advantage of BLG's electrically tunable band structure, we create a lateral tunnel junction and couple it to an antenna exposed to THz radiation. The incoming radiation is then down-converted by the tunnel junction nonlinearity, resulting in high responsivity (>4 kV/W) and low-noise (0.2 pW/[Formula: see text]) detection. We demonstrate how switching from intraband Ohmic to interband tunneling regime can raise detectors' responsivity by few orders of magnitude, in agreement with the developed theory. Our work demonstrates a potential application of tunnel transistors for THz detection and reveals BLG as a promising platform therefor.
| S-EPMC7822863 | biostudies-literature