CO(2) dissolution in water using long serpentine microchannels.
Ontology highlight
ABSTRACT:
SUBMITTER: Cubaud T
PROVIDER: S-EPMC3360710 | biostudies-other | 2012 Jun
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Electrochemical reduction of carbon dioxide (CO2R) poses substantial promise to convert abundant feedstocks (water and CO2) to value-added chemicals and fuels using solely renewable energy. However, recent membrane-electrode assembly (MEA) devices that have been demonstrated to achieve high rates of CO2R are limited by water management within the cell, due to both consumption of water by the CO2R reaction and electro-osmotic fluxes that transport water from the cathode to the anode. Additionally, crossover of potassium (K+) ions poses concern at high current densities where saturation and precipitation of the salt ions can degrade cell performance. Herein, a device architecture incorporating an anion-exchange membrane (AEM) with internal water channels to mitigate MEA dehydration is proposed and demonstrated. A macroscale, two-dimensional continuum model is used to assess water fluxes and local water content within the modified MEA, as well as to determine the optimal channel geometry and composition. The modified AEMs are then fabricated and tested experimentally, demonstrating that the internal channels can both reduce K+ cation crossover as well as improve AEM conductivity and therefore overall cell performance. This work demonstrates the promise of these materials, and operando water-management strategies in general, in handling some of the major hurdles in the development of MEA devices for CO2R.
| S-EPMC9642111 | biostudies-literature
Project description:This work focuses on the simulation and experimental study of directional wicking of water on a surface structured by open microchannels. Stainless steel was chosen as the material for the structure motivated by industrial applications as fuel cells. Inspired by nature and literature, we designed a fin type structure. Using Selective Laser Melting (SLM) the fin type structure was manufactured additively with a resolution down to about 30 μm. The geometry was manufactured with three different scalings and both the experiments and the simulation show that the efficiency of the water transport depends on dimensionless numbers such as Reynolds and Capillary numbers. Full 3D numerical simulations of the multiphase Navier-Stokes equations using Volume of Fluid (VOF) and Lattice-Boltzmann (LBM) methods reproduce qualitatively the experimental results and provide new insight into the details of dynamics at small space and time scales. The influence of the static contact angle on the directional wicking was also studied. The simulation enabled estimation of the contact angle threshold beyond which transport vanishes in addition to the optimal contact angle for transport.
| S-EPMC7864331 | biostudies-literature
Project description:The pull of water from the soil to the leaves causes water in the transpiration stream to be under negative pressure decreasing the water potential below zero. The osmotic concentration also contributes to the decrease in leaf water potential but with much lesser extent. Thus, the surface tension force is approximately balanced by a force induced by negative water potential resulting in concavely curved water-air interfaces in leaves. The lowered water potential causes a reduction in the equilibrium water vapor pressure in internal (sub-stomatal/intercellular) cavities in relation to that over water with the potential of zero, i.e., over the flat surface. The curved surface causes a reduction also in the equilibrium vapor pressure of dissolved CO2, thus enhancing its physical solubility to water. Although the water vapor reduction is acknowledged by plant physiologists its consequences for water vapor exchange at low water potential values have received very little attention. Consequences of the enhanced CO2 solubility to a leaf water-carbon budget have not been considered at all before this study. We use theoretical calculations and modeling to show how the reduction in the vapor pressures affects transpiration and carbon assimilation rates. Our results indicate that the reduction in vapor pressures of water and CO2 could enhance plant water use efficiency up to about 10% at a leaf water potential of -2 MPa, and much more when water potential decreases further. The low water potential allows for a direct stomatal water vapor uptake from the ambient air even at sub-100% relative humidity values. This alone could explain the observed rates of foliar water uptake by e.g., the coastal redwood in the fog belt region of coastal California provided the stomata are sufficiently open. The omission of the reduction in the water vapor pressure causes a bias in the estimates of the stomatal conductance and leaf internal CO2 concentration based on leaf gas exchange measurements. Manufactures of leaf gas exchange measurement systems should incorporate leaf water potentials in measurement set-ups.
| S-EPMC5292819 | biostudies-literature
Project description:In our recent study, we fabricated a pump/tube-connection-free microchip comprising top and bottom polydimethylsiloxane (PDMS) slabs to produce monodispersed water-in-oil droplets in a fully automated, fluid-manipulation fashion. All microstructures required for droplet production were directly patterned on the surfaces of the two PDMS slabs through CO2-laser micromachining, facilitating the fast fabrication of the droplet-production microchips. In the current extension study, we replaced the bottom PDMS slab, which served as a microfluidic layer in the microchip, with a poly(methyl methacrylate) (PMMA) slab. This modification was based on our idea that the bottom PDMS slab does not contribute to the automatic fluid manipulation and that replacing the bottom PDMS slab with a more affordable and accessible, ready-to-use polymer slab, such as a PMMA, would further facilitate the rapid and low-cost fabrication of the connection-free microchips. Using a new PMMA/PDMS microchip, we produced water-in-oil droplets with high degree of size-uniformity (a coefficient of variation for droplet diameters of <5%) without a decrease in the droplet production rate (~270 droplets/s) as compared with that achieved via the previous PDMS/PDMS microchip (~220 droplets/s).
| S-EPMC9502940 | biostudies-literature
Project description:Water purification technologies such as microfiltration/ultrafiltration and reverse osmosis utilize porous membranes to remove suspended particles and solutes. These membranes, however, cause many drawbacks such as a high pumping cost and a need for periodic replacement due to fouling. Here we show an alternative membraneless method for separating suspended particles by exposing the colloidal suspension to CO2. Dissolution of CO2 into the suspension creates solute gradients that drive phoretic motion of particles. Due to the large diffusion potential generated by the dissociation of carbonic acid, colloidal particles move either away from or towards the gas-liquid interface depending on their surface charge. Using the directed motion of particles induced by exposure to CO2, we demonstrate a scalable, continuous flow, membraneless particle filtration process that exhibits low energy consumption, three orders of magnitude lower than conventional microfiltration/ultrafiltration processes, and is essentially free from fouling.
| S-EPMC5418569 | biostudies-literature
Project description:Water-in-salt electrolytes based on highly concentrated bis(trifluoromethyl)sulfonimide (TFSI) promise aqueous electrolytes with stabilities nearing 3 V. However, especially with an electrode approaching the cathodic (reductive) stability, cycling stability is insufficient. While stability critically relies on a solid electrolyte interphase (SEI), the mechanism behind the cathodic stability limit remains unclear. Now, two distinct reduction potentials are revealed for the chemical environments of free and bound water and that both contribute to SEI formation. Free water is reduced about 1 V above bound water in a hydrogen evolution reaction (HER) and is responsible for SEI formation via reactive intermediates of the HER; concurrent LiTFSI precipitation/dissolution establishes a dynamic interface. The free-water population emerges, therefore, as the handle to extend the cathodic limit of aqueous electrolytes and the battery cycling stability.
| S-EPMC7540070 | biostudies-literature
Project description:In the present study, the screening of Mirabegron (MBR) co-amorphous was performed to produce water-soluble and thermodynamically stable MBR co-amorphous with the purpose of overcoming the water solubility problem of MBR. MBR is Biopharmaceutics Classification System (BCS) class II drug used for the treatment of an overreactive bladder. The co-amorphous screening was carried out by means of the vacuum evaporation crystallization technique in methanol solvent using three water-soluble carboxylic acids, characterized by a pKa difference greater than 3 with MBR such as fumaric acid (FA), l-pyroglutamic acid (PG), and citric acid (CA). Powder X-ray diffraction (PXRD) results suggested that all solid materials produced at MBR-FA (1 equivalent (eq.)/1 equivalent (eq.)), MBR-PG (1 eq./1 eq.), and MBR-CA (1 eq./1 eq.) conditions were amorphous state solid materials. Furthermore, by means of solution-state nuclear magnetic resonance (NMR) (¹H, 13C, and 2D) and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, we could assess that MBR and carboxylic acid molecules were linked via ionic interactions to produce MBR co-amorphous. Besides, solid-state cross polarization (CP)/magic angle spinning (MAS) 13C-NMR analysis was conducted for additional assessment of MBR co-amorphous. Afterwards, dissolution tests of MBR co-amorphouses, MBR crystalline solid, and MBR amorphous were carried out for 12 h to evaluate and to compare their solubilities, dissolution rates, and phase transformation phenomenon. Here, the results suggested that MBR co-amorphouses displayed more than 57-fold higher aqueous solubility compared to MBR crystalline solid, and PXRD monitoring result suggested that MBR co-amorphouses were able to maintain their amorphous state for more than 12 h. The same results revealed that MBR amorphous exhibited increased solubility of approximatively 6.7-fold higher compared to MBR crystalline solid. However, the PXRD monitoring result suggested that MBR amorphous undergo rapid phase transformation to crystalline form in just 35 min and that within an hour all MBR amorphous are completely converted to crystalline solid. Accordingly, the increase in MBR co-amorphous' solubility was attributed to the presence of ionic interactions in MBR co-amorphous molecules. Moreover, from the differential scanning calorimetry (DSC) monitoring results, we predicted that the high glass transition temperature (Tg) of MBR co-amorphous compared to MBR amorphous was the main factor influencing the phase stability of MBR co-amorphous.
| S-EPMC6161252 | biostudies-literature
Project description:As the most well-known electrocatalyst for cathodic hydrogen evolution in water splitting electrolyzers, platinum is unfortunately inefficient for anodic oxygen evolution due to its over-binding with oxygen species and excessive dissolution in oxidative environment. Herein we show that single Pt atoms dispersed in cobalt hydrogen phosphate with an unique Pt(OH)(O3)/Co(P) coordination can achieve remarkable catalytic activity and stability for oxygen evolution. The catalyst yields a high turnover frequency (35.1 ± 5.2 s-1) and mass activity (69.5 ± 10.3 A mg-1) at an overpotential of 300 mV and excellent stability. Mechanistic studies elucidate that the superior catalytic performance of isolated Pt atoms herein stems from optimal binding energies of oxygen intermediate and also their strong electronic coupling with neighboring Co atoms that suppresses the formation of soluble Ptx>4 species. Alkaline water electrolyzers assembled with an ultralow Pt loading realizes an industrial-level current density of 1 A cm-2 at 1.8 volts with a high durability.
| S-EPMC9250493 | biostudies-literature
Project description:High throughput particle/cell concentration is crucial for a wide variety of biomedical, clinical, and environmental applications. In this work, we have proposed a passive spiral microfluidic concentrator with a complex cross-sectional shape, i.e., a combination of rectangle and trapezoid, for high separation efficiency and a confinement ratio less than 0.07. Particle focusing in our microfluidic system was observed in a single, tight focusing line, in which higher particle concentration is possible, as compared with simple rectangular or trapezoidal cross-sections with similar flow area. The sharper focusing stems from the confinement of Dean vortices in the trapezoidal region of the complex cross-section. To quantify this effect, we introduce a new parameter, complex focusing number or CFN, which is indicative of the enhancement of inertial focusing of particles in these channels. Three spiral microchannels with various widths of 400 µm, 500 µm, and 600 µm, with the corresponding CFNs of 4.3, 4.5, and 6, respectively, were used. The device with the total width of 600 µm was shown to have a separation efficiency of ~98%, and by recirculating, the output concentration of the sample was 500 times higher than the initial input. Finally, the investigation of results showed that the magnitude of CFN relies entirely on the microchannel geometry, and it is independent of the overall width of the channel cross-section. We envision that this concept of particle focusing through complex cross-sections will prove useful in paving the way towards more efficient inertial microfluidic devices.
| S-EPMC7231362 | biostudies-literature
Project description:Aqueous sodium-ion batteries (AIBs) are promising candidates for large-scale energy storage due to their safe operational properties and low cost. However, AIBs have low specific energy (i.e., <80 Wh kg-1) and limited lifespans (e.g., hundreds of cycles). Mn-Fe Prussian blue analogues are considered ideal positive electrode materials for AIBs, but they show rapid capacity decay due to Jahn-Teller distortions. To circumvent these issues, here, we propose a cation-trapping method that involves the introduction of sodium ferrocyanide (Na4Fe(CN)6) as a supporting salt in a highly concentrated NaClO4-based aqueous electrolyte solution to fill the surface Mn vacancies formed in Fe-substituted Prussian blue Na1.58Fe0.07Mn0.97Fe(CN)6 · 2.65H2O (NaFeMnF) positive electrode materials during cycling. When the engineered aqueous electrolyte solution and the NaFeMnF-based positive electrode are tested in combination with a 3, 4, 9, 10-perylenetetracarboxylic diimide-based negative electrode in a coin cell configuration, a specific energy of 94 Wh kg-1 at 0.5 A g-1 (specific energy based on the active material mass of both electrodes) and a specific discharge capacity retention of 73.4% after 15000 cycles at 2 A g-1 are achieved.
| S-EPMC10275921 | biostudies-literature