Model for bubble pulsation in liquid between parallel viscoelastic layers.
Ontology highlight
ABSTRACT:
SUBMITTER: Hay TA
PROVIDER: S-EPMC3407159 | biostudies-other | 2012 Jul
REPOSITORIES: biostudies-other
Similar Datasets
Project description:A model is developed for a pulsating and translating gas bubble immersed in liquid in a channel formed by two soft, thin elastic parallel layers having densities equal to that of the surrounding liquid and small, but finite, shear moduli. The bubble is nominally spherical but free to undergo small shape deformations. Shear strain in the elastic layers is estimated in a way which is valid for short, transient excitations of the system. Coupled nonlinear second-order differential equations are obtained for the shape and position of the bubble, and numerical integration of an expression for the liquid velocity at the layer interfaces yields an estimate of the elastic layer displacement. Numerical integration of the dynamical equations reveals behavior consistent with laboratory observations of acoustically excited bubbles in ex vivo vessels reported by Chen et al. [Phys. Rev. Lett. 106, 034301 (2011) and Ultrasound Med. Biol. 37, 2139-2148 (2011)].
| S-EPMC3749046 | biostudies-other
Project description:Three models are considered for describing the dynamics of a pulsating cylindrical bubble. A linear solution is derived for a cylindrical bubble in an infinite compressible liquid. The solution accounts for losses due to viscosity, heat conduction, and acoustic radiation. It reveals that radiation is the dominant loss mechanism, and that it is 22 times greater than for a spherical bubble of the same radius. The predicted resonance frequency provides a basis of comparison for limiting forms of other models. The second model considered is a commonly used equation in Rayleigh-Plesset form that requires an incompressible liquid to be finite in extent in order for bubble pulsation to occur. The radial extent of the liquid becomes a fitting parameter, and it is found that considerably different values of the parameter are required for modeling inertial motion versus acoustical oscillations. The third model was developed by V. K. Kedrinskii [Hydrodynamics of Explosion (Springer, New York, 2005), pp. 23-26] in the form of the Gilmore equation for compressible liquids of infinite extent. While the correct resonance frequency and loss factor are not recovered from this model in the linear approximation, it provides reasonable agreement with observations of inertial motion.
| S-EPMC3460979 | biostudies-other
Project description:Interactions between gas-liquid mass transfer and bubble behaviours were investigated to improve the understanding of the relationship between the two sides. The CO2/N2-water system was applied to study the bubble behaviours based on the volume-of-fluid (VOF) model. The mass transfer conditions were taken into consideration when the fluid field was analysed. The bubble behaviours were compared with and without mass transfer. The results show that the absolute slopes of the curves for mass fraction inside the single rising bubbles, with diameters from 3 to 6 mm, decrease from 0.09325 to 0.02818. It means that small single bubbles have higher mass transfer efficiency. The daughter bubbles of cutting behaviour and initial side-by-side bubbles of coalescence behaviour also perform better than the initial large bubbles and coalesced bubbles, respectively. The bubble behaviours affect the mass transfer process. However, the latter also reacts upon the former. The critical intervals between the side-by-side bubbles decrease from 2.0 to 0.9 mm when the bubble diameter changes from 3 to 7 mm. For the coalescence behaviour without mass transfer, the critical intervals are larger because there is no influence of concentration around the bubbles on the bubble motion. The coalescence of cut daughter bubbles is also influenced by the concentration. It was suggested that the interaction between the gas-liquid mass transfer and bubble behaviours cannot be ignored.
| S-EPMC6549981 | biostudies-literature
Project description:Liquid-liquid-solid transitions (LLST) are known to occur in confined liquids, exist in supercooled liquids and emerge in liquids driven from equilibrium. Molecular dynamics (MD) simulations claim many successes in forecasting the phenomena. The transitions are also studied in the framework of thermodynamics based methods and minimalistic models. In here, the proposed approach is derived in the framework of continuum and includes spatial and temporal dynamic heterogeneities; the approach is meant to capture the material behavior at small scales. We conjecture that the liquid-like and solid-like behaviors are dissimilar enough for the two to be governed by different constitutive relations. In this way, we gain additional degree of freedom, which is found essential when predicting the transitional phenomena. As a result, we derive the LLST criteria for liquids in equilibrium, during steady flow and at transient conditions. Lastly, we forecast short-lived LLSTs in human blood during cardiac cycle.
| S-EPMC3579185 | biostudies-other
Project description:Short liquid bridges are stable under the action of surface tension. In applications like electronic packaging, food engineering, and additive manufacturing, this poses challenges to the clean and fast dispensing of viscoelastic fluids. Here, we investigate how viscoelastic liquid bridges can be destabilized by torsion. By combining high-speed imaging and numerical simulation, we show that concave surfaces of liquid bridges can localize shear, in turn localizing normal stresses and making the surface more concave. Such positive feedback creates an indent, which propagates toward the center and leads to breakup of the liquid bridge. The indent formation mechanism closely resembles edge fracture, an often undesired viscoelastic flow instability characterized by the sudden indentation of the fluid's free surface when the fluid is subjected to shear. By applying torsion, even short, capillary stable liquid bridges can be broken in the order of 1 s. This may lead to the development of dispensing protocols that reduce substrate contamination by the satellite droplets and long capillary tails formed by capillary retraction, which is the current mainstream industrial method for destabilizing viscoelastic liquid bridges.
| S-EPMC8214669 | biostudies-literature
Project description:Electrodeposition is a widely practiced method for creating metal, colloidal, and polymer coatings on conductive substrates. In the Newtonian liquid electrolytes typically used, the process is fundamentally unstable. The underlying instabilities have been linked to failure of microcircuits, dendrite formation on battery electrodes, and overlimiting conductance in ion-selective membranes. We report that viscoelastic electrolytes composed of semidilute solutions of very high-molecular weight neutral polymers suppress these instabilities by multiple mechanisms. The voltage window ?V in which a liquid electrolyte can operate free of electroconvective instabilities is shown to be markedly extended in viscoelastic electrolytes and is a power-law function, ?V : ?1/4, of electrolyte viscosity, ?. This power-law relation is replicated in the resistance to ion transport at liquid/solid interfaces. We discuss consequences of our observations and show that viscoelastic electrolytes enable stable electrodeposition of many metals, with the most profound effects observed for reactive metals, such as sodium and lithium. This finding is of contemporary interest for high-energy electrochemical energy storage.
| S-EPMC5866059 | biostudies-literature
Project description:Because of their practical importance and complex underlying physics, the thin liquid films formed between colliding bubbles or droplets have long been the subject of experimental investigations and theoretical modeling. Here, we examine the possibility of accurately predicting the dynamics of the thin liquid film drainage using numerical simulations when compared to an experimental investigation of millimetric bubbles free-rising in pure water and colliding with a flat glass interface. A high-speed camera is used to track the bubble bounce trajectory, and a second high-speed camera together with a pulsed laser is used for interferometric determination of the shape and evolution of the thin liquid film profile during the bounce. The numerical simulations are conducted with the open source Gerris flow solver. The simulation reliability was first confirmed by comparison with the experimental bubble bounce trajectory and bubble shape evolution during the bounce. We further demonstrate that the simulation predicted time evolution for the shape of the thin liquid film profiles is in excellent agreement with the high-speed interferometry measured profiles for the entire experimentally accessible film size range. Finally, we discuss the implications of using numerical simulation together with theoretical modeling for resolving the complex processes of high velocity bubble and droplet collisions.
| S-EPMC8867726 | biostudies-literature
Project description:A multiharmonic quartz crystal microbalance (QCM) has been applied to study the viscoelastic properties of the aptamer-based sensing layers at the surface of a QCM transducer covered by neutravidin following interaction with bacteria Listeria innocua. Addition of bacteria in the concentration range 5 × 103-106 CFU/mL resulted in a decrease of resonant frequency and in an increase of dissipation. The frequency decrease has been lower than one would expect considering the dimension of the bacteria. This can be caused by lower penetration depth of the acoustics wave (approximately 120 nm) in comparison with the thickness of the bacterial layer (approximately 500 nm). Addition of E. coli at the surface of neutravidin as well as aptamer layers did not result in significant changes in frequency and dissipation. Using the Kelvin-Voight model the analysis of the viscoelastic properties of the sensing layers was performed and several parameters such as penetration depth, Γ, viscosity coefficient, η, and shear modulus, μ, were determined following various modifications of QCM transducer. The penetration depth decreased following adsorption of the neutravidin layer, which is evidence of the formation of a rigid protein structure. This value did not change significantly following adsorption of aptamers and Listeria innocua. Viscosity coefficient was higher for the neutravidin layer in comparison with the naked QCM transducer in a buffer. However, a further increase of viscosity coefficient took place following attachment of aptamers suggesting their softer structure. The interaction of Listeria innocua with the aptamer layer resulted in slight decrease of viscosity coefficient. The shearing modulus increased for the neutravidin layer and decreased following aptamer adsorption, while a slight increase of µ was observed after the addition of Listeria innocua.
| S-EPMC8402281 | biostudies-literature
Project description:Graphene liquid cells provide the highest possible spatial resolution for liquid-phase transmission electron microscopy. Here, in graphene liquid cells (GLCs), we studied the nanoscale dynamics of bubbles induced by controllable damage in graphene. The extent of damage depended on the electron dose rate and the presence of bubbles in the cell. After graphene was damaged, air leaked from the bubbles into the water. We also observed the unexpected directional nucleation of new bubbles, which is beyond the explanation of conventional diffusion theory. We attributed this to the effect of nanoscale confinement. These findings provide new insights into complex fluid phenomena under nanoscale confinement.
| S-EPMC7241020 | biostudies-literature
Project description:The spread layers of lysozyme (LYS) microgel particles were studied by surface dilational rheology, infrared reflection-absorption spectra, Brewster angle microscopy, atomic force microscopy, and scanning electron microscopy. It is shown that the properties of LYS microgel layers differ significantly from those of ß-lactoglobulin (BLG) microgel layers. In the latter case, the spread protein layer is mainly a monolayer, and the interactions between particles lead to the increase in the dynamic surface elasticity by up to 140 mN/m. In contrast, the dynamic elasticity of the LYS microgel layer does not exceed the values for pure protein layers. The compression isotherms also do not exhibit specific features of the layer collapse that are characteristic for the layers of BLG aggregates. LYS aggregates form trough three-dimensional clusters directly during the spreading process, and protein spherulites do not spread further along the interface. As a result, the liquid surface contains large, almost empty regions and some patches of high local concentration of the microgel particles.
| S-EPMC9570608 | biostudies-literature