Characterization of piezoelectric ceramics and 1-3 composites for high power transducers.
Ontology highlight
ABSTRACT:
SUBMITTER: Jae Lee H
PROVIDER: S-EPMC3411559 | biostudies-other | 2012 Jul
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The performance of ultrasonic transducers is largely determined by the piezoelectric properties and geometries of their active elements. Due to the brittle nature of piezoceramics, existing processing tools for piezoelectric elements only achieve simple geometries, including flat disks, cylinders, cubes and rings. While advances in additive manufacturing give rise to free-form fabrication of piezoceramics, the resultant transducers suffer from high porosity, weak piezoelectric responses, and limited geometrical flexibility. We introduce optimized piezoceramic printing and processing strategies to produce highly responsive piezoelectric microtransducers that operate at ultrasonic frequencies. The 3D printed dense piezoelectric elements achieve high piezoelectric coefficients and complex architectures. The resulting piezoelectric charge constant, d33, and coupling factor, kt, of the 3D printed piezoceramic reach 583 pC/N and 0.57, approaching the properties of pristine ceramics. The integrated printing of transducer packaging materials and 3D printed piezoceramics with microarchitectures create opportunities for miniaturized piezoelectric ultrasound transducers capable of acoustic focusing and localized cavitation within millimeter-sized channels, leading to miniaturized ultrasonic devices that enable a wide range of biomedical applications.
| S-EPMC10140030 | biostudies-literature
Project description:Polymer-ceramic piezoelectric composites, combining high piezoelectricity and mechanical flexibility, have attracted increasing interest in both academia and industry. However, their piezoelectric activity is largely limited by intrinsically low crystallinity and weak spontaneous polarization. Here, we propose a Ti3C2Tx MXene anchoring method to manipulate the intermolecular interactions within the all-trans conformation of a polymer matrix. Employing phase-field simulation and molecular dynamics calculations, we show that OH surface terminations on the Ti3C2Tx nanosheets offer hydrogen bonding with the fluoropolymer matrix, leading to dipole alignment and enhanced net spontaneous polarization of the polymer-ceramic composites. We then translated this interfacial bonding strategy into electrospinning to boost the piezoelectric response of samarium doped Pb (Mg1/3Nb2/3)O3-PbTiO3/polyvinylidene fluoride composite nanofibers by 160% via Ti3C2Tx nanosheets inclusion. With excellent piezoelectric and mechanical attributes, the as-electrospun piezoelectric nanofibers can be easily integrated into the conventional shoe insoles to form a foot sensor network for all-around gait patterns monitoring, walking habits identification and Metatarsalgi prognosis. This work utilizes the interfacial coupling mechanism of intermolecular anchoring as a strategy to develop high-performance piezoelectric composites for wearable electronics.
| S-EPMC9388583 | biostudies-literature
Project description:One of the great advancements in the applications of piezoelectric materials is the application for therapeutic medical ultrasound for sonothrombolysis. Sonothrombolysis is a promising ultrasound based technique to treat blood clots compared to conventional thrombolytic treatments or mechanical thrombectomy. Recent clinical trials using transcranial Doppler ultrasound, microbubble mediated sonothrombolysis, and catheter directed sonothrombolysis have shown promise. However, these conventional sonothrombolysis techniques still pose clinical safety limitations, preventing their application for standard of care. Recent advances in sonothrombolysis techniques including targeted and drug loaded microbubbles, phase change nanodroplets, high intensity focused ultrasound, histotripsy, and improved intravascular transducers, address some of the limitations of conventional sonothrombolysis treatments. Here, we review the strengths and limitations of these latest pre-clincial advancements for sonothrombolysis and their potential to improve clinical blood clot treatments.
| S-EPMC7085655 | biostudies-literature
Project description:Despite the importance of respiration and metabolism measurement in daily life, they are not widely available to ordinary people because of sophisticated and expensive equipment. Here, we first report a straightforward and economical approach to monitoring respiratory function and metabolic rate using a wearable piezoelectric airflow transducer (WPAT). A self-shielded bend sensor is designed by sticking two uniaxially drawn piezoelectric poly l-lactic acid films with different cutting angles, and then the bend sensor is mounted on one end of a plastic tube to engineer the WPAT. The airflow sensing principle of the WPAT is theoretically determined through finite element simulation, and the WPAT is calibrated with a pulse calibration method. We prove that the WPAT has similar accuracy (correlation coefficient >0.99) to a pneumotachometer in respiratory flow and lung volume assessment. We demonstrate metabolism measurement using the WPAT and the relationship between minute volume and metabolic rates via human wear trials. The mean difference of measured metabolic rates between the WPAT and a Biopac indirect calorimeter is 0.015 kcal/min, which shows comparable performance. Significantly, unlike the Biopac indirect calorimeter with an airflow sensor, an oxygen gas sensor, and a carbon dioxide gas sensor, we merely use the simple-structured WPAT to measure metabolism. Thus, we expect the WPAT technology to provide a precise, convenient, and cost-effective respiratory and metabolic monitoring solution for next-generation medical home care applications and wearable healthcare systems.
| S-EPMC9425556 | biostudies-literature
Project description:This data article presents characteristic acoustic and flow data of a fluidic ultrasonic transducer as well as acoustic data of a commercial piezoelectric ultrasonic transducer used in non-destructive testing for civil engineering. The flow data has been acquired using hot-wire anemometry and a Pitot tube. The three-dimensional acoustic data of both devices has been acquired using a calibrated microphone. The distribution of characteristic acoustic properties of both transducers are extracted and given in addition to the raw data. The data presented in the article will be a valuable source for reference and validation, both for developing fluidic and alternate ultrasound generation technologies. Furthermore, they will give additional insight into the acoustic-flow interaction phenomena of high speed switching devices. This article is accompanying the paper Experimental Analysis of the Acoustic Field of an Ultrasonic Pulse Induced by a Fluidic Switch (Bühling et al., 2021) published in The Journal of the Acoustical Society of America, where the data is interpreted in detail and the rationale for characteristic sound properties of the fluidic transducer are given.
| S-EPMC8379259 | biostudies-literature
Project description:The electroacoustic performance of 1-3 piezoelectric composite transducers with low loss polymer filler was studied and compared to monolithic Pb(Zr,Ti)O(3) (PZT) piezoelectric transducers. The 1-3 composite transducers exhibited significantly high electromechanical coupling factor (k(t) ∼ 0.64) when compared to monolithic counterparts (k(t) ∼ 0.5), leading to the improved bandwidth and loop sensitivity, being on the order of 67% and -24.0 dB versus 44% and -24.8 dB, respectively. In addition, the acoustic output power and transmit efficiency (∼50%) were found to be comparable to the monolithic PZT transducers, demonstrating potential for broad bandwidth, high power ultrasonic transducer applications.
| S-EPMC3537705 | biostudies-other
Project description:We report on a heterogeneity study, down to the atomic scale, on a representative multiple-element-modified ceramic based on potassium sodium niobate (KNN): 0.95(Na0.49K0.49Li0.02)(Nb0.8Ta0.2)O3-0.05CaZrO3 with 2 wt % MnO2. We show that different routes for incorporating the MnO2 (either before or after the calcination step) affect the phase composition and finally the functionality of the material. According to X-ray diffraction and scanning electron microscopy analyses, the ceramics consist of orthorhombic and tetragonal perovskite phases together with a small amount of Mn-rich secondary phase. The addition of MnO2 after the calcination results in better piezoelectric properties, corresponding to a ratio between the orthorhombic and tetragonal perovskite phases that is closer to unity. We also show, using microscopy techniques combined with analytical tools, that Zr-rich, Ta-rich and Mn-rich segregations are present on the nano and atomic levels. With this multi-scale analysis approach, we demonstrate that the functional properties are sensitive to minor modifications in the synthesis route, and consequently to different material properties on all scales. We believe that detecting and learning how to control these modifications will be a step forward in overcoming the irreproducibility problems with KNN-based materials.
| S-EPMC6947271 | biostudies-literature
Project description:The temperature-dependence behaviors of ferroelectric, piezoelectric, k p and electrical-field-induced strain were carefully evaluated for high-performance BiFeO3-0.3BaTiO3 (BF-0.3BT) ceramics. There results indicate, combined with Rayleigh analysis and temperature-dependence XRD and PFM, that the increase of strain and large signal with increasing the temperature from room temperature to 180 °C is related to the joint effect of intrinsic contribution (lattice expansion) and extrinsic contribution (domain switching). With further increasing the temperature to 300 °C, the large signal d 33 and electrical-field-induced strain mildly decrease because of the increase of conductivity for BF-0.3BT ceramics. However, different from strain and large signal the small signal d 33(E0) and k p exhibit excellent temperature stability behavior as the temperature increases from room temperature to 300 °C.
| S-EPMC9088175 | biostudies-literature
Project description:Flexible piezoelectric materials capable of withstanding large deformation play key roles in flexible electronics. Ferroelectric ceramics with a high piezoelectric coefficient are inherently brittle, whereas polar polymers exhibit a low piezoelectric coefficient. Here we report a highly stretchable/compressible piezoelectric composite composed of ferroelectric ceramic skeleton, elastomer matrix and relaxor ferroelectric-based hybrid at the ceramic/matrix interface as dielectric transition layers, exhibiting a giant piezoelectric coefficient of 250 picometers per volt, high electromechanical coupling factor keff of 65%, ultralow acoustic impedance of 3MRyl and high cyclic stability under 50% compression strain. The superior flexibility and piezoelectric properties are attributed to the electric polarization and mechanical load transfer paths formed by the ceramic skeleton, and dielectric mismatch mitigation between ceramic fillers and elastomer matrix by the dielectric transition layer. The synergistic fusion of ultrahigh piezoelectric properties and superior flexibility in these polymer composites is expected to drive emerging applications in flexible smart electronics.
| S-EPMC10359065 | biostudies-literature
Project description:Tactile devices are often used in the field of robotics; however, the development of compact high-resolution tactile devices remains challenging. In this study, we developed a haptic device for force presentation using a DC motor and a tactile sensation device to simultaneously present haptic and tactile stimuli. A microelectromechanical system was selected to maintain the compactness of the tactile device. Piezoelectric micromachined ultrasonic transducers are known for high-power stimulation, and we selected lanthanum-doped lead zirconate titanate as the high-power amplified actuator. A finger mount structure that transfers force for amplifying ultrasonic waves was considered to combine acoustic pressure and aeroacoustics by attaching silicone rubber. The device was fabricated, and the performance of the tactile sensations was evaluated. The developed device uses the novel concept of combining acoustic pressure and aeroacoustics, and its compactness renders it suitable for wearable systems.
| S-EPMC10831112 | biostudies-literature