Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Magnetic Compton scattering studies of magneto-dielectric Ba(Co0.85Mn0.15)O3-δ

ABSTRACT: We revealed that the Ba(Co0.85Mn0.15)O3-δ ceramic samples exhibited ferromagnetic-dielectric behavior below the magnetic transition temperature of about 35 K. The origin of their magnetic ordering was expected to super-exchange coupling of Co(4+)(d (5))-O(2-)-Mn(4+)(d (3)) with bonding angle of 180° and/or Mn(4+)(d (3))-O(2-)-Mn(4+)(d (3)) with bonding angle of 90°. The magnetic spin momentum estimated by the magnetic Compton profiles (MCP) of the samples had similar temperature dependence as that determined by the temperature dependence of magnetic moment by superconducting quantum interference device, which meant that the observed magnetic moments could be ascribed to the spin moment. The shapes of the MCPs of the samples were completely same regardless of the temperature measured. This result indicates that there are no changes of the momentum space distribution of spin density between ferromagnetic and paramagnetic states. So, this magnetic transition is simply caused by a thermal fluctuation of the spin.

SUBMITTER: Shinoda R

PROVIDER: S-EPMC3637313 | biostudies-other | 2013 May

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Subterahertz dielectric relaxation in lead-free Ba(Zr,Ti)O3 relaxor ferroelectrics.

Project description:Relaxors are complex materials with unusual properties that have been puzzling the scientific community since their discovery. The main characteristic of relaxors, that is, their dielectric relaxation, remains unclear and is still under debate. The difficulty to conduct measurements at frequencies ranging from ?1?GHz to ?1?THz and the challenge of developing models to capture their complex dynamical responses are among the reasons for such a situation. Here, we report first-principles-based molecular dynamic simulations of lead-free Ba(Zr0.5Ti0.5)O3, which allows us to obtain its subterahertz dynamics. This approach reproduces the striking characteristics of relaxors including the dielectric relaxation, the constant-loss behaviour, the diffuse maximum in the temperature dependence of susceptibility, the substantial widening of dielectric spectrum on cooling and the resulting Vogel-Fulcher law. The simulations further relate such features to the decomposed dielectric responses, each associated with its own polarization mechanism, therefore, enhancing the current understanding of relaxor behaviour.

| S-EPMC4822000 | biostudies-literature

Dielectric and Energy Storage Properties of Ba(1-x)CaxZryTi(1-y)O3 (BCZT): A Review.

Project description:The Ba(1-x)CaxZryTi(1-y)O3 (BCZT), a lead-free ceramic material, has attracted the scientific community since 2009 due to its large piezoelectric coefficient and resulting high dielectric permittivity. This perovskite material is a characteristic dielectric material for the pulsed power capacitors industry currently, which in turn leads to devices for effective storage and supply of electric energy. After this remarkable achievement in the area of lead-free piezoelectric ceramics, the researchers are exploring both the bulk as well as thin films of this perovskite material. It is observed that the thin film of this materials have outstandingly high power densities and high energy densities which is suitable for electrochemical supercapacitor applications. From a functional materials point of view this material has also gained attention in multiferroic composite material as the ferroelectric constituent of these composites and has provided extraordinary electric properties. This article presents a review on the relevant scientific advancements that have been made by using the BCZT materials for electric energy storage applications by optimizing its dielectric properties. The article starts with a BCZT introduction and discussion of the need of this material for high energy density capacitors, followed by different synthesis techniques and the effect on dielectric properties of doping different materials in BCZT. The advantages of thin film BCZT material over bulk counterparts are also discussed and its use as one of the constituents of mutiferroic composites is also presented. Finally, it summarizes the future prospects of this material followed by the conclusions.

| S-EPMC6862191 | biostudies-literature

Why Sn doping significantly enhances the dielectric properties of Ba(Ti 1-x Snx)O3.

Project description:Through appropriate doping, the properties of BaTiO3-based ferroelectrics can be significantly enhanced. To determine the physical process induced by the doping of Sn atoms in Ba(Ti0.8Sn0.2)O3, we performed high-resolution scanning transmission electron microscopy experiments and observed that the regions with low Sn content formed polar nano regions (PNRs) embedded in the matrix in Ba(Ti0.8Sn0.2)O3. The interactions among Sn, Ti, Ba and O atoms were determined using first principles calculations. Based on the characteristics of the electronic structure and crystal lattice strain fields, the effects of doping with Sn were investigated. The Sn doping not only changed the electronic structure of the crystal but also increased the dielectric properties of the PNRs. Moreover, the Sn doping was also responsible for the diffuse phase transition of the Ba(Ti 1-x Snx)O3 material. The effects mentioned in this paper are universal in lead-free ferroelectrics, and similar elements such as Sb, Mg, and Zr may have the same functions in other systems. Thus, these results provide guidance for the design of the doping process and new systems of ferroelectric or relaxor materials.

| S-EPMC4342585 | biostudies-other

Impact of thickness variation on structural, dielectric and piezoelectric properties of (Ba,Ca)(Ti,Zr)O3 epitaxial thin films.

Project description:It is shown that the dielectric and piezoelectric properties of Ba(Ti0.8Zr0.2)O3-x(Ba0.7Ca0.3)TiO3 (x = 0.45) (BCTZ 45) epitaxial thin films have a nontrivial dependence on film thickness. BCTZ 45 epitaxial films with different thicknesses (up to 400 nm) have been deposited on SrTiO3 by pulsed laser deposition and investigated by different combined techniques: conventional and off-axis X-ray diffraction, high resolution transmission electron microscopy and dielectric and piezoforce microscopy. The changes occurring in epitaxial films when their thickness increases have been attributed to a partial relaxation of misfit strain, driving the induced tetragonal symmetry in very thin films to the original rhombohedral symmetry of the bulk material in the thickest film, which influences directly and indirectly the dielectric and piezoelectric properties.

| S-EPMC5794999 | biostudies-literature

Surface-modified Ba(Zr0.3Ti0.7)O3 nanofibers by polyvinylpyrrolidone filler for poly(vinylidene fluoride) composites with enhanced dielectric constant and energy storage density.

Project description:Ferroelectric-relaxor behavior of Ba(Zr0.3Ti0.7)O3 nanofibers (BZT NF) with a large aspect ratio were prepared via electrospinning and surface modified by PVP as dielectric fillers. The nanocomposite flexible films based on surface modified BZT NF and polyvinylidene fluoride (PVDF) were fabricated via a solution casting. The results show that the surface-modified BZT NF fillers are highly dispersed and well integrated in the PVDF nanocomposites. The nanocomposites exhibit enhanced dielectric constant and reduced loss tangents at a low volume fraction of surface-modified BZT NF. The polymer nanocomposites maintain a relatively high breakdown strength, which is favorable for enhancing energy storage density in the nanocomposites. The nanocomposite containing of 2.5 vol. % of PVP modified BZT NF exhibits energy density as high as 6.3 J/cm(3) at 3800 kV/cm, which is more than doubled that of the pure PVDF of 2.8 J/cm(3) at 4000 kV/cm. Such significant enhancement could be attributed to the combined effects of the surface modification and large aspect ratio of the BZT NF. This work may provide a route for using the surface modified ferroelectric-relaxor behavior of ceramic nanofibers to enhance the dielectric energy density in ceramic-polymer nanocomposites.

| S-EPMC4869030 | biostudies-other

Magnetic-field-induced dielectric behaviors and magneto-electrical coupling of multiferroic compounds containing cobalt ferrite/barium calcium titanate composite fibers.

Project description:Multiferroics have broad application prospects in various fields such as multi-layer ceramic capacitors and multifunctional devices owing to their high dielectric constants and coupled magnetic and ferroelectric properties at room temperature. In this study, cobalt ferrite (CFO)/barium calcium titanate (BCT) composite fibers are prepared from BCT and CFO sols by an electrospinning method, and are then oriented by magnetic fields and sintered at high temperatures. The effects of magnetic fields and CFO contents on the nanostructures and magnetoelectric properties of the composites are investigated. Strong coupling between magnetic and ferroelectric properties occurs in CFO/BCT composites with magnetic orientation. More interestingly, the dielectric constants of CFO/BCT composites with magnetic orientation are found to be enhanced (by ∼1.5-3.5 times) as compared with those of BCT and CFO/BCT without magnetic orientation. The boost of dielectric constants of magnetic-field orientated CFO/BCT is attributed to the magneto-electrical coupling between CFO and BCT, where the polar domains of BCT are pinned by the orientated CFO. Therefore, this work not only provides a novel and effective approach in enhancing the dielectric constants of ceramic ferroelectrics, which is of tremendous value for industrial applications, but also elucidates the interaction mechanisms between ferromagnetic phase and ferroelectric phase in multiferroic compounds.

| S-EPMC5806601 | biostudies-literature

Revaluation of magnetic properties of Magneto.

Project description: Not available

| S-EPMC7103519 | biostudies-literature

A new (Ba, Ca) (Ti, Zr)O3 based multiferroic composite with large magnetoelectric effect.

Project description:The lead-free ferroelectric 0.5Ba(Zr0.2Ti0.8)O3 - 0.5(Ba0.7Ca0.3)TiO3 (BCZT) is a promising component for multifunctional multiferroics due to its excellent room temperature piezoelectric properties. Having a composition close to the polymorphic phase boundary between the orthorhombic and tetragonal phases, it deserves a case study for analysis of its potential for modern electronics applications. To obtain magnetoelectric coupling, the piezoelectric phase needs to be combined with a suitable magnetostrictive phase. In the current article, we report on the synthesis, dielectric, magnetic, and magnetoelectric characterization of a new magnetoelectric multiferroic composite consisting of BCZT as a piezoelectric phase and CoFe2O4 (CFO) as the magnetostrictive phase. We found that this material is multiferroic at room temperature and manifests a magnetoelectric effect larger than that of BaTiO3 -CoFe2O4 bulk composites with similar content of the ferrite phase.

| S-EPMC4995375 | biostudies-literature

Tunable multiferroic order parameters in Sr1- x Ba x Mn1- y Ti y O3.

Project description:Responding to the rapidly increasing demand for efficient energy usage and increased speed and functionality of electronic and spintronic devices, multiferroic oxides have recently emerged as key materials capable of tackling this multifaceted challenge. In this paper, we describe the development of single-site manganese-based multiferroic perovskite materials with modest amounts of nonmagnetic Ti substituted at the magnetic Mn site in Sr1- x Ba x Mn1- y Ti y O3 (SBMTO). Significantly enhanced properties were achieved with ferroelectric-type structural transition temperatures boosted to ∼430K. Ferroelectric distortions with large spontaneous polarization values of ∼30μC/cm2, derived from a point charge model, are similar in magnitude to those of the prototypical nonmagnetic BaTiO3. Temperature dependence of the system's properties was investigated by synchrotron x-ray powder diffraction and neutron powder diffraction at ambient and high pressures. Various relationships were determined between the structural and magnetic properties, Ba and Ti contents, and TN and TC. Most importantly, our results demonstrate the large coupling between the magnetic and ferroelectric order parameters and the wide tunability of this coupling by slight variations of the material's stoichiometry.

| S-EPMC7594212 | biostudies-literature

Neutron scattering studies of spin excitations in hole-doped Ba(0.67)K(0.33)Fe(2)As(2) superconductor.

Project description:We report inelastic neutron scattering experiments on single crystals of superconducting Ba(0.67)K(0.33)Fe(2)As(2) (T(c) = 38?K). In addition to confirming the resonance previously found in powder samples, we find that spin excitations in the normal state form longitudinally elongated ellipses along the Q(AFM) direction in momentum space, consistent with density functional theory predictions. On cooling below T(c), while the resonance preserves its momentum anisotropy as expected, spin excitations at energies below the resonance become essentially isotropic in the in-plane momentum space and dramatically increase their correlation length. These results suggest that the superconducting gap structures in Ba(0.67)Ka(0.33)Fe(2)As(2) are more complicated than those suggested from angle resolved photoemission experiments.

| S-EPMC3239165 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data