Low dose hard x-ray contact microscopy assisted by a photoelectric conversion layer.
Ontology highlight
ABSTRACT:
SUBMITTER: Gomella A
PROVIDER: S-EPMC3645440 | biostudies-other | 2013 Apr
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Advances in microscopy have enabled us to see at unprecedented depths and resolutions, even breaking the diffraction-limit by several fold. These improvements have come at the expense of system complexity with microscopes routinely employing multiple objective lenses and custom optical relays. Optimal system design is paramount for imaging performance, but research systems are limited by the use of commercial components because optical prescriptions are often inaccessible. System performance can be further degraded when these components are implemented in nonstandard configurations outside of manufacturer specifications. Here, we describe a method for characterization of compound optical elements including curvatures, material and air-gap thicknesses, and glass types. We present validation data for doublets and a commercial broadband scan lens. Our method is both non-contact and non-destructive, and we believe it addresses a unique gap in optical design that may be extended to broad applications in both research and industrial manufacturing.
| S-EPMC6864052 | biostudies-literature
Project description:X-ray grating interferometry is a coherent imaging technique that bears tremendous potential for three-dimensional tomographic imaging of soft biological tissue and other specimens whose details exhibit very weak absorption contrast. It is intrinsically trimodal, delivering phase contrast, absorption contrast, and scattering ("dark-field") contrast. Recently reported acquisition strategies for grating-interferometric phase tomography constitute a major improvement of dose efficiency and speed. In particular, some of these techniques eliminate the need for scanning of one of the gratings ("phase stepping"). This advantage, however, comes at the cost of other limitations. These can be a loss in spatial resolution, or the inability to fully separate the three imaging modalities. In the present paper we report a data acquisition and processing method that optimizes dose efficiency but does not share the main limitations of other recently reported methods. Although our method still relies on phase stepping, it effectively uses only down to a single detector frame per projection angle and yields images corresponding to all three contrast modalities. In particular, this means that dark-field imaging remains accessible. The method is also compliant with data acquisition over an angular range of only 180° and with a continuous rotation of the specimen.
| S-EPMC3387041 | biostudies-literature
Project description:Ultraweak light detectors have wide-ranging important applications such as astronomical observation, remote sensing, laser ranging, and night vision. Current commercial ultraweak light detectors are commonly based on a photomultiplier tube or an avalanche photodiode, and they are incompatible with microelectronic devices for digital imaging applications, because of their high operating voltage and bulky size. Herein, we develop a memory phototransistor for ultraweak light detection, by exploiting the charge-storage accumulative effect in CdS nanoribbon. The memory phototransistors break the power law of traditional photodetectors and follow a time-dependent exponential-association photoelectric conversion law. Significantly, the memory phototransistors exhibit ultrahigh responsivity of 3.8 × 109 A W-1 and detectivity of 7.7 × 1022 Jones. As a result, the memory phototransistors are able to detect ultraweak light of 6 nW cm-2 with an extremely high sensitivity of 4 × 107. The proposed memory phototransistors offer a design concept for ultraweak light sensing devices.
| S-EPMC6426936 | biostudies-literature
Project description:Biological light-driven ion pumps move ions against a concentration gradient to create a membrane potential, thus converting sunlight energy directly into an osmotic potential. Here, we describe an artificial light-driven ion pump system in which a carbon nitride nanotube membrane can drive ions thermodynamically uphill against an up to 5000-fold concentration gradient by illumination. The separation of electrons and holes in the membrane under illumination results in a transmembrane potential which is thought to be the foundation for the pumping phenomenon. When used for harvesting solar energy, a sustained open circuit voltage of 550 mV and a current density of 2.4 μA/cm2 can reliably be generated, which can be further scaled up through series and parallel circuits of multiple membranes. The ion transport based photovoltaic system proposed here offers a roadmap for the development of devices by using simple, cheap, and stable polymeric carbon nitride.
| S-EPMC6325115 | biostudies-literature
Project description:Full-field transmission X-ray microscopy is a unique non-destructive technique for three-dimensional imaging of specimens at the nanometer scale. Here, the use of zone-doubled Fresnel zone plates to achieve a spatial resolution better than 20 nm in the hard X-ray regime (8-10 keV) is reported. By obtaining a tomographic reconstruction of a Ni/YSZ solid-oxide fuel cell, the feasibility of performing three-dimensional imaging of scientifically relevant samples using such high-spatial-resolution Fresnel zone plates is demonstrated.
| S-EPMC3579491 | biostudies-literature
Project description:Simulation results are presented that explore an innovative, new design for X-ray detection in the 20-50 keV range that is an alternative to traditional direct and indirect detection methods. Typical indirect detection using a scintillator must trade-off between absorption efficiency and spatial resolution. With a high-Z layer that down-converts incident photons on top of a silicon detector, this design has increased absorption efficiency without sacrificing spatial resolution. Simulation results elucidate the relationship between the thickness of each layer and the number of photoelectrons generated. Further, the physics behind the production of electron-hole pairs in the silicon layer is studied via a second model to shed more light on the detector's functionality. Together, the two models provide a greater understanding of this detector and reveal the potential of this novel form of X-ray detection.
| S-EPMC8618102 | biostudies-literature
Project description:Static and in situ nanoscale spectro-microscopy is now routinely performed on the Hard X-ray Nanoprobe beamline at Diamond and the solutions implemented to provide robust energy scanning and experimental operation are described. A software-based scheme for active feedback stabilization of X-ray beam position and monochromatic beam flux across the operating energy range of the beamline is reported, consisting of two linked feedback loops using extremum seeking and position control. Multimodal registration methods have been implemented for active compensation of drift during an experiment to compensate for sample movement during in situ experiments or from beam-induced effects.
| S-EPMC8415335 | biostudies-literature
Project description:Understanding the reaction pathway and kinetics of solid-state phase transformation is critical in designing advanced electrode materials with better performance and stability. Despite the first-order phase transition with a large lattice mismatch between the involved phases, spinel LiMn1.5Ni0.5O4 is capable of fast rate even at large particle size, presenting an enigma yet to be understood. The present study uses advanced two-dimensional and three-dimensional nano-tomography on a series of well-formed LixMn1.5Ni0.5O4 (0≤x≤1) crystals to visualize the mesoscale phase distribution, as a function of Li content at the sub-particle level. Inhomogeneity along with the coexistence of Li-rich and Li-poor phases are broadly observed on partially delithiated crystals, providing direct evidence for a concurrent nucleation and growth process instead of a shrinking-core or a particle-by-particle process. Superior kinetics of (100) facets at the vertices of truncated octahedral particles promote preferential delithiation, whereas the observation of strain-induced cracking suggests mechanical degradation in the material.
| S-EPMC5296648 | biostudies-literature
Project description:Electron microscopy of biological tissue has recently seen an unprecedented increase in imaging throughput moving the ultrastructural analysis of large tissue blocks such as whole brains into the realm of the feasible. However, homogeneous, high-quality electron microscopy staining of large biological samples is still a major challenge. To date, assessing the staining quality in electron microscopy requires running a sample through the entire staining protocol end-to-end, which can take weeks or even months for large samples, rendering protocol optimization for such samples to be inefficient. Here, we present an in situ time-lapsed X-ray-assisted staining procedure that opens the 'black box' of electron microscopy staining and allows observation of individual staining steps in real time. Using this novel method, we measured the accumulation of heavy metals in large tissue samples immersed in different staining solutions. We show that the measured accumulation of osmium in fixed tissue obeys empirically a quadratic dependence between the incubation time and sample size. We found that potassium ferrocyanide, a classic reducing agent for osmium tetroxide, clears the tissue after osmium staining and that the tissue expands in osmium tetroxide solution, but shrinks in potassium ferrocyanide reduced osmium solution. X-ray-assisted staining gave access to the in situ staining kinetics and allowed us to develop a diffusion-reaction-advection model that accurately simulates the measured accumulation of osmium in tissue. These are first steps towards in silico staining experiments and simulation-guided optimization of staining protocols for large samples. Hence, X-ray-assisted staining will be a useful tool for the development of reliable staining procedures for large samples such as entire brains of mice, monkeys, or humans.
| S-EPMC9665849 | biostudies-literature
Project description:Photoacoustic microscopy can image many biological molecules and nano-agents in vivo via low-scattering ultrasonic sensing. Insufficient sensitivity is a long-standing obstacle for imaging low-absorbing chromophores with less photobleaching or toxicity, reduced perturbation to delicate organs, and more choices of low-power lasers. Here, the photoacoustic probe design is collaboratively optimized and a spectral-spatial filter is implemented. A multi-spectral super-low-dose photoacoustic microscopy (SLD-PAM) is presented that improves the sensitivity by ≈33 times. SLD-PAM can visualize microvessels and quantify oxygen saturation in vivo with ≈1% of the maximum permissible exposure, dramatically reducing potential phototoxicity or perturbation to normal tissue function, especially in imaging of delicate tissues, such as the eye and the brain. Capitalizing on the high sensitivity, direct imaging of deoxyhemoglobin concentration is achieved without spectral unmixing, avoiding wavelength-dependent errors and computational noises. With reduced laser power, SLD-PAM can reduce photobleaching by ≈85%. It is also demonstrated that SLD-PAM achieves similar molecular imaging quality using 80% fewer contrast agents. Therefore, SLD-PAM enables the use of a broader range of low-absorbing nano-agents, small molecules, and genetically encoded biomarkers, as well as more types of low-power light sources in wide spectra. It is believed that SLD-PAM offers a powerful tool for anatomical, functional, and molecular imaging.
| S-EPMC10427362 | biostudies-literature