Dataset Information

Variable angle locking intercarpal fusion system for four-corner arthrodesis: indications and surgical technique.

ABSTRACT: Four-corner fusion (4CF) is an accepted and regularly performed procedure when managing posttraumatic degenerative disorders in the wrist. This procedure consists of excision of the entire scaphoid in association with midcarpal fusion of the remaining four ulnar carpal bones (hamate, capitate, lunate, and triquetrum). In the majority of cases, the long-term outcome is a functional painless wrist. However, the exact procedure to best achieve a rapid solid bone union of the fusion mass without hardware complications remains controversial. The authors have developed a precise system to ensure precise positioning, firm fixation, and fusion at the midcarpal joint together with an early postoperative recovery, avoiding some of the issues reported with other implants used for 4CF. The described implant is a circular plate accommodating variable angle locking screws as well as compression screws that can firmly fix the plate to the carpal bones. The locking technology produces a very solid construct. A special reaming-distraction-compression guide has also been developed to both countersink the plate on the underlying carpal bone mass and allow distraction of the midcarpal joint for debridement and cancellous bone graft interposition. The features of the implant, its surgical technique, and a relevant case are described.

SUBMITTER: Gonzalez Del Pino J

PROVIDER: S-EPMC3658673 | biostudies-other | 2012 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:Background Proximal row carpectomy (PRC) and four-corner arthrodesis (4-CA) represent motion-sparing procedures for addressing degenerative wrist pathologies. While both procedures demonstrate comparable functional outcomes, postoperative pain presents a surgical challenge that often necessitates the use of opioids. Objectives The aim of this study was to (1) compare opioid prescribing patterns surrounding PRC and 4-CA, (2) identify risk factors predisposing patients to increased perioperative and prolonged postoperative opioids, and (3) examine the association between opioids and perioperative health care utilization. Patients and Methods PearlDiver Patients Records Database was used to retrospectively identify patients undergoing primary PRC and 4-CA between 2010 and 2018. Patient demographics, comorbidities, prescription drug usage, and perioperative health care utilization were evaluated. Perioperative opioid prescriptions and post-operative opioid prescriptions were recorded. Logistic regression analysis evaluated the association of patient risk factors. Results There was no significant difference in perioperative (PRC [odds ratio {OR}: 0.84, p = 0.788]; 4-CA [OR: 0.75, p = 0.658]) or prolonged postoperative opioid prescriptions (PRC [OR: 0.95, p = 0.927]; 4-CA [OR: 0.99, p = 0.990]) between PRC and 4-CA. Chronic back pain and use of benzodiazepines or anticonvulsants were associated with increased risks of prolonged postoperative opioids. Prolonged postoperative opioids presented increased risks of emergency department visits (OR: 2.09, p = 0.019) and hospital readmissions (OR: 10.2, p = 0.003). Conclusion No significant differences exist in the prescription of opioids for PRC versus 4-CA. Both procedures have high amounts of prolonged postoperative opioid use, which is associated with increased risks of emergency department visits and hospital readmissions. Level of Evidence This is a level III, retrospective comparative study.

Project description:Introduction Four-corner arthrodesis with excision of the scaphoid is an accepted salvage procedure for scapholunate advanced collapse (SLAC) and scaphoid nonunion advanced collapse (SNAC) and has been performed in our unit for over 20 years. We have undertaken a retrospective review of 116 of these procedures performed in 110 patients between 1992 and 2009. Fifty-eight patients attended for a clinical evaluation, and 29 responded by postal questionnaire. Methods The surgical technique undertaken was standard. That is, through a dorsal approach the scaphoid and tip of the radial styloid were excised. The capitate, lunate, triquetrum, and hamate articular surfaces were then prepared down to bleeding bone. Bone grafts from the scaphoid and radial styloid were then inserted and fixation undertaken. For the latter, various methods were used, including Kirschner (K-)wires, staples, bone screws, but predominantly the Spider plate (Integra Life Sciences, USA). Thereafter the wrist was immobilized for a minimum period of 2 weeks prior to rehabilitation. Results Follow-up was done at a mean of 9 years and 4 months (range 3-19 years). All patients reported a significant improvement in pain relief and ∼50% of flexion extension, although only 40% of radioulnar deviation. Grip strength was again ∼50% of the contralateral side. Most patients reported a significant improvement in function with 87% returning to work. In addition, radiologic evaluation identified 28 patients (31%) who demonstrated ongoing signs of nonunion, particularly around the triquetrum. Fourteen of these (15%) underwent a further procedure, generally with success. Finally, none of the patients demonstrated any arthritic changes in the lunate fossa on follow-up X-ray, and all secondary procedures were undertaken within 2 years of the primary. Discussion This research has demonstrated that four-corner fusion fixed with a circular plate can result in a satisfactory outcome with a reduction in pain, a functional range of motion, and a satisfactory functional outcome. The bulk of the complications appear to occur in the first 2 years after surgery. Thereafter, analysis shows long-term satisfaction with little deterioration. Nonunion, particularly around the triquetrum, continues to be a problem, but it may be that this bone should be excised along with the scaphoid, resulting in a three-part fusion only. Alternatively, a simple capitolunate fusion may be satisfactory.

Project description:A retrograde nail with posterior-to-anterior (PA) locking into os calcis, talus and tibia was used to correct deformity and achieve fusion after failed fusion. A variety of methods have been published to achieve union of the ankle and subtalar joint in a failed fusion situation. We have studied a retrograde locking nail technique through a 2.5-cm incision in the non-weightbearing part of the sole of the foot. Remaining cartilage in the ankle joint, where necessary, was percutaneously removed through an anterior approach and the locking nail was inserted after reaming of os calcis, talus and tibia. Locking screw insertion was in the sagittal plane (p.a. direction), in talus os calcis and tibial diaphysis using a nail mounted jig. Ten patients were entered in the study (age 27-60 years). The initial aetiology for attempted fusion was post-traumatic in nine cases and rheumatic in one case. There were 25 previous operations in the cohort not leading to fusion. An additional temporary external fixator was used in four cases to reach and maintain the optimum position for the procedure. The intervention time was 30-75 min. Dynamisation of the nail was performed after four months under local anaesthesia. The mean duration of follow-up was 4 years (3-5.5 years). Radiologically and clinically, fusion was achieved in 16 weeks (range, 12-20 weeks). There was no loosening of the implant or implant failure. A leg length discrepancy was avoided using this technique. There was one complication with varus malunion in a heavy smoker which united after corrective osteotomy, revision nailing and bone grafting. Patient satisfaction was measured on a scale (not visual analogue) of 0 (not satisfied) to 10 (completely satisfied); overall satisfaction averaged 9.5 points (range, 6-10 points). The postoperative ankle-hindfoot score of the American Orthopedic Foot and Ankle Society averaged 73.5 points (range, 61-81 points). Retrograde locked nailing with locking in the sagittal plane is a reliable minimally invasive procedure to achieve fusion of the ankle and the subtalar joint after failed fusion.

Dataset Information

Variable angle locking intercarpal fusion system for four-corner arthrodesis: indications and surgical technique.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets