Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Solid surface tension measured by a liquid drop under a solid film.

ABSTRACT: We show that a drop of liquid a few hundred microns in diameter placed under a solid, elastic, thin film (?10 ?m thick) causes it to bulge by tens of microns. The deformed shape is governed by equilibrium of tensions exerted by the various interfaces and the solid film, a form of Neumann's triangle. Unlike Young's equation, which specifies the contact angles at the junction of two fluids and a (rigid) solid, and is fundamentally underdetermined, both tensions in the solid film can be determined here if the liquid-vapor surface tension is known independently. Tensions in the solid film have a contribution from elastic stretch and a constant residual component. The residual component, extracted by extrapolation to films of vanishing thickness and supported by analysis of the elastic deformation, is interpreted as the solid-fluid surface tension, demonstrating that compliant thin-film structures can be used to measure solid surface tensions.

SUBMITTER: Nadermann N

PROVIDER: S-EPMC3696820 | biostudies-other | 2013 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Solid surface tension measured by a liquid drop under a solid film.

Nadermann Nichole N Hui Chung-Yuen CY Jagota Anand A

Proceedings of the National Academy of Sciences of the United States of America 20130610 26

We show that a drop of liquid a few hundred microns in diameter placed under a solid, elastic, thin film (∼10 μm thick) causes it to bulge by tens of microns. The deformed shape is governed by equilibrium of tensions exerted by the various interfaces and the solid film, a form of Neumann's triangle. Unlike Young's equation, which specifies the contact angles at the junction of two fluids and a (rigid) solid, and is fundamentally underdetermined, both tensions in the solid film can be determined ...[more]

PMID: 23754440

Similar Datasets

Surface tension and viscosity of liquid Pd43Cu27Ni10P20 measured in a levitation device under microgravity.

Project description:Here we present measurements of surface tension and viscosity of the bulk glass-forming alloy Pd43Cu27Ni10P20 performed during containerless processing under reduced gravity. We applied the oscillating drop method in an electromagnetic levitation facility on board of parabolic flights. The measured viscosity exhibits a pronounced temperature dependence following an Arrhenius law over a temperature range from 1100 K to 1450 K. Together with literature values of viscosity at lower temperatures, the viscosity of Pd43Cu27Ni10P20 can be well described by a free volume model. X-ray diffraction analysis on the material retrieved after the parabolic flights confirm the glassy nature after vitrification of the bulk samples and thus the absence of crystallization during processing over a wide temperature range.

| S-EPMC6389878 | biostudies-literature

Sintering of viscous droplets under surface tension.

Project description:We conduct experiments to investigate the sintering of high-viscosity liquid droplets. Free-standing cylinders of spherical glass beads are heated above their glass transition temperature, causing them to densify under surface tension. We determine the evolving volume of the bead pack at high spatial and temporal resolution. We use these data to test a range of existing models. We extend the models to account for the time-dependent droplet viscosity that results from non-isothermal conditions, and to account for non-zero final porosity. We also present a method to account for the initial distribution of radii of the pores interstitial to the liquid spheres, which allows the models to be used with no fitting parameters. We find a good agreement between the models and the data for times less than the capillary relaxation timescale. For longer times, we find an increasing discrepancy between the data and the model as the Darcy outgassing time-scale approaches the sintering timescale. We conclude that the decreasing permeability of the sintering system inhibits late-stage densification. Finally, we determine the residual, trapped gas volume fraction at equilibrium using X-ray computed tomography and compare this with theoretical values for the critical gas volume fraction in systems of overlapping spheres.

| S-EPMC4892276 | biostudies-literature

Methodology to calculate interfacial tension under electric field using pendent drop profile analysis.

Project description:In this paper, we present a methodology to calculate interfacial tension of a water-oil interface under an electric field. The Young-Laplace equation, conventionally used to estimate surface/interfacial tension in axisymmetric drop shape analysis (ADSA), is modified to include electrostatic effects. The solution needs normal component of the Maxwell stress at the interface which is calculated separately by solving the Laplace equation for electric potential. The optimized fitting between the resulting theoretical profile and the experimentally obtained profile results into Bond number which is used to calculate the apparent value of interfacial tension. The algorithm can process a large number of drop profiles in one go. The methodology can be applied in the ADSA studies for adsorption dynamics where a drop is held for a long time while surface active molecules are allowed to adsorb. The method discussed in this paper will help the future studies in adsorption dynamics at fluid interfaces under electric field and the resulting interfacial property evolution.

| S-EPMC6545058 | biostudies-literature

Not spreading in reverse: The dewetting of a liquid film into a single drop.

Project description:Wetting and dewetting are both fundamental modes of motion of liquids on solid surfaces. They are critically important for processes in biology, chemistry, and engineering, such as drying, coating, and lubrication. However, recent progress in wetting, which has led to new fields such as superhydrophobicity and liquid marbles, has not been matched by dewetting. A significant problem has been the inability to study the model system of a uniform film dewetting from a nonwetting surface to a single macroscopic droplet-a barrier that does not exist for the reverse wetting process of a droplet spreading into a film. We report the dewetting of a dielectrophoresis-induced film into a single equilibrium droplet. The emergent picture of the full dewetting dynamics is of an initial regime, where a liquid rim recedes at constant speed and constant dynamic contact angle, followed by a relatively short exponential relaxation of a spherical cap shape. This sharply contrasts with the reverse wetting process, where a spreading droplet follows a smooth sequence of spherical cap shapes. Complementary numerical simulations and a hydrodynamic model reveal a local dewetting mechanism driven by the equilibrium contact angle, where contact line slip dominates the dewetting dynamics. Our conclusions can be used to understand a wide variety of processes involving liquid dewetting, such as drop rebound, condensation, and evaporation. In overcoming the barrier to studying single film-to-droplet dewetting, our results provide new approaches to fluid manipulation and uses of dewetting, such as inducing films of prescribed initial shapes and slip-controlled liquid retraction.

| S-EPMC5040479 | biostudies-literature

Characterization of the Ultralow Interfacial Tension in Liquid-Liquid Phase Separated Polyelectrolyte Complex Coacervates by the Deformed Drop Retraction Method.

Project description:Dilute droplets form upon changing the temperature of a phase separated polyelectrolyte complex coacervate. This provides an in situ approach to measure the interfacial tension between supernatant (dilute droplet) and dense coacervate by the deformed drop retraction (DDR) method. The aqueous coacervate, formed via a model 1:1 by charge stoichiometric polyelectrolyte blend, exhibits ultralow interfacial tension with the coexisting phase. DDR finds the interfacial tension scales as ? = ? 0(1 - C s/C s,c) ? , with ? = 1.5 ± 0.1, ? 0 = 204 ± 36 ?N/m, and C s,c = 1.977 mol/L. The value of ? independently validates the classical exponent of 3/2. The scaling holds between C s/C s,c of 0.75 to 0.94, the closest measurements to date near the critical salt concentration (C s,c). The temperature dependence of the interfacial tension is consistent with observed lower critical solution phase behavior and classical scaling. A detailed account of the DDR method and validation of assumptions are demonstrated.

| S-EPMC7340275 | biostudies-literature

Modulation of solid surface with desirable under-liquid wettability based on molecular hydrophilic-lipophilic balance.

Project description:There has been great interest in the fabrication of solid surfaces with desirable under-liquid wettability, and especially under-liquid dual-lyophobicity, because of their potential for widespread use. However, there remains the lack of a general principle to modulate the under-liquid wettability in terms of surface energy (SE). Herein, we found that the relative proportion between the polar and dispersive components in SE that reflects the competition between hydrophilicity and lipophilicity governs the under-liquid wettability of the solid surface. For the first time, we introduced hydrophilic-lipophilic balance (HLB) calculated solely based on the amount and type of hydrophilic and lipophilic fragments in surface molecules to rapidly predict the under-liquid wettability of a solid surface, thereby guiding the fabrication of solid surfaces with desirable under-liquid wettability. Accordingly, the under-liquid dual superlyophobic surfaces in a nonpolar oil-water-solid system were fabricated by grafting molecules with appropriate HLB values (e.g., 6.341-7.673 in a cyclohexane-water-solid system) onto porous nanofibrous membranes, which were able to achieve continuous separation of oil-water mixtures. This work provides reasonable guidance for the fabrication of solid surfaces with targeted under-liquid wettability, which may lead to advanced applications in oil-water-solid systems.

| S-EPMC8098691 | biostudies-literature

Surface Chemistry Enhancements for the Tunable Super-Liquid Repellency of Low-Surface-Tension Liquids.

Project description:Super-hydrophobic, super-oleo(amphi)phobic, and super-omniphobic materials are universally important in the fields of science and engineering. Despite rapid advancements, gaps of understanding still exist between each distinctive wetting state. The transition of super-hydrophobicity to super-(oleo-, amphi-, and omni-)phobicity typically requires the use of re-entrant features. Today, re-entrant geometry induced super-(amphi- and omni-)phobicity is well-supported by both experiments and theory. However, owing to geometrical complexities, the concept of re-entrant geometry forms a dogma that limits the industrial progress of these unique states of wettability. Moreover, a key fundamental question remains unanswered: are extreme surface chemistry enhancements able to influence super-liquid repellency? Here, this was rigorously tested via an alternative pathway that does not require explicit designer re-entrant features. Highly controllable and tunable vertical network polymerization and functionalization were used to achieve fluoroalkyl densification on nanoparticles. For the first time, relative fluoro-functionalization densities are quantitatively tuned and correlated to super-liquid repellency performance. Step-wise tunable super-amphiphobic nanoparticle films with a Cassie-Baxter state (contact angle of >150° and sliding angle of <10°) against various liquids is demonstrated. This was tested down to very low surface tension liquids to a minimum of ca. 23.8 mN/m. Such findings could eventually lead to the future development of super-(amphi)omniphobic materials that transcend the sole use of re-entrant geometry.

| S-EPMC6728126 | biostudies-literature

Surface Tension of Liquid Organic Acids: An Artificial Neural Network Model.

Project description:An artificial neural network model is proposed for the surface tension of liquid organic fatty acids covering a wide temperature range. A set of 2051 data collected for 98 acids (including carboxylic, aliphatic, and polyfunctional) was considered for the training, testing, and prediction of the resulting network model. Different architectures were explored, with the final choice giving the best results, in which the input layer has the reduced temperature (temperature divided by the critical point temperature), boiling temperature, and acentric factor as an independent variable, a 41-neuron hidden layer, and an output layer consisting of one neuron. The overall absolute percentage deviation is 1.33%, and the maximum percentage deviation is 14.53%. These results constitute a major improvement over the accuracy obtained using corresponding-states correlations from the literature.

| S-EPMC7998689 | biostudies-literature

Surface-Tension-Confined Channel with Biomimetic Microstructures for Unidirectional Liquid Spreading.

Project description:Unidirectional liquid spreading without energy input is of significant interest for the broad applications in diverse fields such as water harvesting, drop transfer, oil-water separation and microfluidic devices. However, the controllability of liquid motion and the simplification of manufacturing process remain challenges. Inspired by the peristome of Nepenthes alata, a surface-tension-confined (STC) channel with biomimetic microcavities was fabricated facilely through UV exposure photolithography and partial plasma treatment. Perfect asymmetric liquid spreading was achieved by combination of microcavities and hydrophobic boundary, and the stability of pinning effect was demonstrated. The influences of structural features of microcavities on both liquid spreading and liquid pinning were investigated and the underlying mechanism was revealed. We also demonstrated the spontaneous unidirectional transport of liquid in 3D space and on tilting slope. In addition, through changing pits arrangement and wettability pattern, complex liquid motion paths and microreactors were realized. This work will open a new way for liquid manipulation and lab-on-chip applications.

| S-EPMC7692703 | biostudies-literature

Sorting Liquid Droplets by Surface Tension Using Devices with Quasi-Superamphiphobic Coatings.

Project description:Any solid surface with homogenous or varying surface energy can spontaneously show variable wettability to liquid droplets with different or identical surface tensions. Here, we studied a glass slide sprayed with a quasi-superamphiphobic coating consisting of a hexane suspension of perfluorosilane-coated nanoparticles. Four areas on the glass slide with a total length of 7.5 cm were precisely tuned via ultraviolet (UV) irradiation, and droplets with surface tensions of 72.1-33.9 mN m-1 were categorized at a tilting angle of 3°. Then, we fabricated a U-shaped device sprayed with the same coating and used it to sort the droplets more finely by rolling them in the guide groove of the device to measure their total rolling time and distance. We found a correlation between ethanol content/surface tension and rolling time/distance, so we used the same device to estimate the alcoholic strength of Chinese liquors and to predict the surface tension of ethanol aqueous solutions.

| S-EPMC7240524 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data