Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis of tetragonal and orthorhombic polymorphs of Hf3N4 by high-pressure annealing of a prestructured nanocrystalline precursor.

ABSTRACT: Hf3N4 in nanocrystalline form is produced by solution phase reaction of Hf(NEtMe)4 with ammonia followed by low-temperature pyrolysis in ammonia. Understanding of phase behavior in these systems is important because early transition-metal nitrides with the metal in maximum oxidation state are potential visible light photocatalysts. A combination of synchrotron powder X-ray diffraction and pair distribution function studies has been used to show this phase to have a tetragonally distorted fluorite structure with 1/3 vacancies on the anion sites. Laser heating nanocrystalline Hf3N4 at 12 GPa and 1500 K in a diamond anvil cell results in its crystallization with the same structure type, an interesting example of prestructuring of the phase during preparation of the precursor compound. This metastable pathway could provide a route to other new polymorphs of metal nitrides and to nitrogen-rich phases where they do not currently exist. Importantly it leads to bulk formation of the material rather than surface conversion as often occurs in elemental combination reactions at high pressure. Laser heating at 2000 K at a higher pressure of 19 GPa results in a further new polymorph of Hf3N4 that adopts an anion deficient cottunite-type (orthorhombic) structure. The orthorhombic Hf3N4 phase is recoverable to ambient pressure and the tetragonal phase is at least partially recoverable.

SUBMITTER: Salamat A

PROVIDER: S-EPMC3715886 | biostudies-other | 2013 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

High-pressure synthesis and electrochemical properties of tetragonal LiMnO2.

Project description:Tetragonal structured LiMnO2 (t-LiMnO2) samples were synthesized under pressures above 8 GPa and investigated as a positive electrode material for lithium-ion batteries. Rietveld analyses based on X-ray diffraction measurements indicated that t-LiMnO2 belongs to a γ-LiFeO2-type crystal structure with the I41/amd space group. The charge capacity during the initial cycle was 37 mA h g-1 at 25 °C, but improved to 185 mA h g-1 at 40 °C with an average voltage of 4.56 V vs. Li+/Li. This demonstrated the superiority of t-LiMnO2 over other lithium manganese oxides in terms of energy density. The X-ray diffraction measurements and Raman spectroscopy of cycled t-LiMnO2 indicated an irreversible transformation from the γ-LiFeO2-type structure into a Li x Mn2O4 spinel structure by the displacement of 25% of the Mn ions to vacant octahedral sites through adjacent octahedral sites.

| S-EPMC9082863 | biostudies-literature

Density Functional Study of Cubic, Tetragonal, and Orthorhombic CsPbBr3 Perovskite.

Project description:Cesium lead bromide (CsPbBr3) perovskite has recently gained significance owing to its rapidly increasing performance when used for light-emitting devices. In this study, we used density functional theory to determine the structural, electronic, and optical properties of the cubic, tetragonal, and orthorhombic temperature-dependent phases of CsPbBr3 perovskite using the full-potential linear augmented plane wave method. The electronic properties of CsPbBr3 perovskite have been investigated by evaluating their changes upon exerting spin-orbit coupling (SOC). The following exchange potentials were used: the local density approximation (LDA), Perdew-Burke-Ernzerhof generalized gradient approximation (PBE-GGA), Engel-Vosko GGA (EV-GGA), Perdew-Burke-Ernzerhof GGA revised for solids (PBEsol-GGA), modified Becke-Johnson GGA (mBJ-GGA), new modified Becke-Johnson GGA (nmBJ-GGA), and unmodified Becke-Johnson GGA (umBJ-GGA). Our band structure results indicated that the cubic, tetragonal, and orthorhombic phases have direct energy bandgaps. By including the SOC effect in the calculations, the bandgaps computed with mBJ-GGA and nmBJ-GGA were found to be in good agreement with the experimental results. Additionally, despite the large variations in their lattice constants, the three CsPbBr3 phases possessed similar optical properties. These results demonstrate a wide temperature range of operation for CsPbBr3.

| S-EPMC7144159 | biostudies-literature

High-pressure Nucleation of Low-Density Polymorphs*.

Project description:New polymorphs β and γ of bis-3-nitrophenyl disulphide, crystallized above 0.3 GPa, are less dense than the ambient-pressure polymorph α. This counterintuitive density relation results from the high-entropy nucleation and subsequent kinetic crystallization. The work performed by pressure compensates the high entropy and temperature product, substantiated in varied conformers and increased chemical potential. Pressure-increased viscosity promotes the kinetic polymorphs, in accordance with empirical Ostwald's rule of stages. It contrasts to mechanochemical techniques, favouring high-density polymorphs.

| S-EPMC8252116 | biostudies-literature

Orthorhombic charge density wave on the tetragonal lattice of EuAl4.

Project description:EuAl4 possesses the BaAl4 crystal structure type with tetragonal symmetry I4/mmm. It undergoes a charge density wave (CDW) transition at T CDW = 145 K and features four consecutive antiferromagnetic phase transitions below 16 K. Here we use single-crystal X-ray diffraction to determine the incommensurately modulated crystal structure of EuAl4 in its CDW state. The CDW is shown to be incommensurate with modulation wave vector q = (0,0,0.1781 (3)) at 70 K. The symmetry of the incommensurately modulated crystal structure is orthorhombic with superspace group Fmmm(00σ)s00, where Fmmm is a subgroup of I4/mmm of index 2. Both the lattice and the atomic coordinates of the basic structure remain tetragonal. Symmetry breaking is entirely due to the modulation wave, where atoms Eu and Al1 have displacements exclusively along a, while the fourfold rotation would require equal displacement amplitudes along a and b. The calculated band structure of the basic structure and interatomic distances in the modulated crystal structure both indicate the Al atoms as the location of the CDW. The tem-per-ature dependence of the specific heat reveals an anomaly at T CDW = 145 K of a magnitude similar to canonical CDW systems. The present discovery of orthorhombic symmetry for the CDW state of EuAl4 leads to the suggestion of monoclinic instead of orthorhombic symmetry for the third AFM state.

| S-EPMC9067112 | biostudies-literature

High-pressure orthorhombic ferromagnesite as a potential deep-mantle carbon carrier.

Project description:Knowledge of the physical and chemical properties of candidate deep-carbon carriers such as ferromagnesite [(Mg,Fe)CO?] at high pressure and temperature of the deep mantle is necessary for our understanding of deep-carbon storage as well as the global carbon cycle of the planet. Previous studies have reported very different scenarios for the (Mg,Fe)CO? system at deep-mantle conditions including the chemical dissociation to (Mg,Fe)O+CO?, the occurrence of the tetrahedrally-coordinated carbonates based on CO? structural units, and various high-pressure phase transitions. Here we have studied the phase stability and compressional behavior of (Mg,Fe)CO? carbonates up to relevant lower-mantle conditions of approximately 120?GPa and 2400?K. Our experimental results show that the rhombohedral siderite (Phase I) transforms to an orthorhombic phase (Phase II with Pmm2 space group) at approximately 50?GPa and 1400?K. The structural transition is likely driven by the spin transition of iron accompanied by a volume collapse in the Fe-rich (Mg,Fe)CO? phases; the spin transition stabilizes the high-pressure phase II at much lower pressure conditions than its Mg-rich counterpart. It is conceivable that the low-spin ferromagnesite phase II becomes a major deep-carbon carrier at the deeper parts of the lower mantle below 1900?km in depth.

| S-EPMC4284511 | biostudies-literature

Sol-gel Autocombustion Synthesis of Nanocrystalline High-entropy Alloys.

Project description:A reduction in the particle size is expected to improve the properties and increase the application potential of high-entropy alloys. Therefore, in this study, a novel sol-gel autocombustion technique was first used to synthesize high-entropy alloys. The average grain size of the prepared nanocrystalline CoCrCuNiAl high-entropy alloys showed was 14 nm with an excellent and uniform dispersion, exhibiting a distinct magnetic behavior similar to the superparamagnetic behavior. We show that the metal nitrates first form (Co,Cu,Mg,Ni,Zn)O high-entropy oxides, and then in situ reduce to CoCrCuNiAl high-entropy alloys by the reducing gases, and the chelation between citric acid and the metal ions and the in situ chemical reactions are the dominant reaction mechanisms. We demonstrate that the sol-gel autocombustion process is an efficient way to synthesize solid solution alloys eluding the restriction of a high mixing entropy.

| S-EPMC5469749 | biostudies-literature

Ferroelectric Orthorhombic ZrO2 Thin Films Achieved Through Nanosecond Laser Annealing.

Project description:A new approach for the stabilization of the ferroelectric orthorhombic ZrO2 films is demonstrated through nanosecond laser annealing (NLA) of as-deposited Si/SiOx /W(14 nm)/ZrO2 (8 nm)/W(22 nm), grown by ion beam sputtering at low temperatures. The NLA process optimization is guided by COMSOL multiphysics simulations. The films annealed under the optimized conditions reveal the presence of the orthorhombic phase, as confirmed by X-ray diffraction, electron backscatter diffraction, and transmission electron microscopy. Macroscopic polarization-electric field hysteresis loops show ferroelectric behavior, with saturation polarization of 12.8 µC cm-2 , remnant polarization of 12.7 µC cm-2 and coercive field of 1.2 MV cm-1 . The films exhibit a wake-up effect that is attributed to the migration of point defects, such as oxygen vacancies, and/or a transition from nonferroelectric (monoclinic and tetragonal phase) to the ferroelectric orthorhombic phase. The capacitors demonstrate a stable polarization with an endurance of 6.0 × 105 cycles, demonstrating the potential of the NLA process for the fabrication of ferroelectric memory devices with high polarization, low coercive field, and high cycling stability.

| S-EPMC10214231 | biostudies-literature

High-Pressure Polymorphs Nucleated and Stabilized by Rational Doping under Ambient Conditions.

Project description:High-pressure polymorphs can be obtained and stabilized at ambient pressure by utilizing dopants with more voluminous molecules, inducing internal strain in the structures. This effect has been confirmed for doped resorcinol and imidazole derivatives by nucleating and stabilizing their high-pressure phases under ambient conditions. The dopant molecular volume and concentration, as well as the bulk modulus of the polymorph in the binary system, are related to the stability region in the single-component phase diagram. High-pressure isothermal and isochoric recrystallizations yielded pure single crystals of resorcinol ε above 0.20 GPa and a new polymorph ζ above 0.70 GPa. These recrystallizations of pure resorcinol revealed within 1 GPa of the p-T phase diagram the boundaries and the stability regions of four resorcinol polymorphs α, β, ε, and ζ, contrary to the compression experiments on ambient-pressure polymorphs α and β, when the high-pressure phases were hidden behind the wide hysteresis extending to nearly 5 GPa. The hysteresis, originating from the H-bonding networks, hinders the formation of polymorphs ε and ζ when polymorphs α and β are compressed without melting or dissolving the crystals. Polymorph ζ is the only known resorcinol structure built of hydrogen-bonded layers.

| S-EPMC8559611 | biostudies-literature

Comparison between the orthorhombic and tetragonal forms of the heptamer sequence d[GCG(xT)GCG]/d(CGCACGC).

Project description:Cyclohexene nucleic acid (CeNA) building blocks can be introduced into natural DNA sequences without a large conformational influence because of the ability of the six-membered sugar ring to mimic both the C2'-endo and C3'-endo conformations of the naturally occurring ribofuranose sugar ring. The non-self-complementary DNA sequence d[GCG(xT)GCG]/d(CGCACGC) with one incorporated CeNA (xT) moiety crystallizes in two forms: orthorhombic and tetragonal. The tetragonal form, which diffracts to 3 A resolution, is a kinetically stable polymorph of the orthorhombic form [Robeyns et al. (2010), Artificial DNA, 1, 1-7], which diffracts to 1.17 A resolution and is the thermodynamically stable form of the CeNA-incorporated duplex. Here, the two structures are compared, with special emphasis on the differences in crystal packing and the irreversible conversion of the kinetic form into the high-resolution diffracting thermodynamic form.

| S-EPMC2935219 | biostudies-literature

Grain size dependent high-pressure elastic properties of ultrafine micro/nanocrystalline grossular.

Project description:We have performed sound velocity and unit cell volume measurements of three synthetic, ultrafine micro/nanocrystalline grossular samples up to 50 GPa using Brillouin spectroscopy and synchrotron X-ray diffraction. The samples are characterized by average grain sizes of 90 nm, 93 nm and 179 nm (hereinafter referred to as samples Gr90, Gr93, and Gr179, respectively). The experimentally determined sound velocities and elastic properties of Gr179 sample are comparable with previous measurements, but slightly higher than those of Gr90 and Gr93 under ambient conditions. However, the differences diminish with increasing pressure, and the velocity crossover eventually takes place at approximately 20-30 GPa. The X-ray diffraction peaks of the ultrafine micro/nanocrystalline grossular samples significantly broaden between 15-40 GPa, especially for Gr179. The velocity or elasticity crossover observed at pressures over 30 GPa might be explained by different grain size reduction and/or inhomogeneous strain within the individual grains for the three grossular samples, which is supported by both the pressure-induced peak broadening observed in the X-ray diffraction experiments and transmission electron microscopy observations. The elastic behavior of ultrafine micro/nanocrystalline silicates, in this case, grossular, is both grain size and pressure dependent.

| S-EPMC8602367 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data