Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Experimental verification and investigation of disks scattering slab modes in metal-dielectric heterostructures.

ABSTRACT: A thin dielectric plate can support conventional slab modes such as leaky Fabry-Perot, guided waves and radiation modes. When the plate is coated on a metallic subwavelength disk array, it can result in new confined modes, hereby named 'disks scattering slab modes' (DSSMs). By use of a terahertz time-domain spectroscopy system, we experimentally verify the existence of two types of DSSMs in terahertz range: one we refer to as highly confined disks scattering Fabry-Perot-like modes (DSFPMs) and the other as, weakly confined disks scattering radiation-like modes (DSRMs). Spectral characteristics of these confined modes are measured and numerically simulated. Particularly, based on the experimental results and a dipole-scattering model developed here, we show that the features of the DSFPMs can be tuned by changing the filling fraction of the disk array. We believe these results can make important contributions to the designs of new terahertz devices, including tunable absorbers and filters.

SUBMITTER: Ding L

PROVIDER: S-EPMC3749549 | biostudies-other | 2013

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Dielectric Properties Investigation of Metal-Insulator-Metal (MIM) Capacitors.

Project description:This study presents the construction and dielectric properties investigation of atomic-layer-deposition Al2O3/TiO2/HfO2 dielectric-film-based metal-insulator-metal (MIM) capacitors. The influence of the dielectric layer material and thickness on the performance of MIM capacitors are also systematically investigated. The morphology and surface roughness of dielectric films for different materials and thicknesses are analyzed via atomic force microscopy (AFM). Among them, the 25 nm Al2O3-based dielectric capacitor exhibits superior comprehensive electrical performance, including a high capacitance density of 7.89 fF·µm-2, desirable breakdown voltage and leakage current of about 12 V and 1.4 × 10-10 A·cm-2, and quadratic voltage coefficient of 303.6 ppm·V-2. Simultaneously, the fabricated capacitor indicates desirable stability in terms of frequency and bias voltage (at 1 MHz), with the corresponding slight capacitance density variation of about 0.52 fF·µm-2 and 0.25 fF·µm-2. Furthermore, the mechanism of the variation in capacitance density and leakage current might be attributed to the Poole-Frenkel emission and charge-trapping effect of the high-k materials. All these results indicate potential applications in integrated passive devices.

| S-EPMC9227371 | biostudies-literature

Experimental verification of field-enhanced molecular vibrational scattering at single infrared antennas.

Project description:Surface-enhanced infrared absorption (SEIRA) spectroscopy exploits the field enhancement near nanophotonic structures for highly sensitive characterization of (bio)molecules. The vibrational signature observed in SEIRA spectra is typically interpreted as field-enhanced molecular absorption. Here, we study molecular vibrations in the near field of single antennas and show that the vibrational signature can be equally well explained by field-enhanced molecular scattering. Although the infrared scattering cross section of molecules is negligible compared to their absorption cross section, the interference between the molecular-scattered field and the incident field enhances the spectral signature caused by molecular vibrational scattering by 10 orders of magnitude, thus becoming as large as that of field-enhanced molecular absorption. We provide experimental evidence that field-enhanced molecular scattering can be measured, scales in intensity with the fourth power of the local field enhancement and fully explains the vibrational signature in SEIRA spectra in both magnitude and line shape. Our work may open new paths for developing highly sensitive SEIRA sensors that exploit the presented scattering concept.

| S-EPMC11310513 | biostudies-literature

Nonradiating anapole modes in dielectric nanoparticles.

Project description:Nonradiating current configurations attract attention of physicists for many years as possible models of stable atoms. One intriguing example of such a nonradiating source is known as 'anapole'. An anapole mode can be viewed as a composition of electric and toroidal dipole moments, resulting in destructive interference of the radiation fields due to similarity of their far-field scattering patterns. Here we demonstrate experimentally that dielectric nanoparticles can exhibit a radiationless anapole mode in visible. We achieve the spectral overlap of the toroidal and electric dipole modes through a geometry tuning, and observe a highly pronounced dip in the far-field scattering accompanied by the specific near-field distribution associated with the anapole mode. The anapole physics provides a unique playground for the study of electromagnetic properties of nontrivial excitations of complex fields, reciprocity violation and Aharonov-Bohm like phenomena at optical frequencies.

| S-EPMC4560796 | biostudies-literature

Controlling the Infrared Dielectric Function through Atomic-Scale Heterostructures.

Project description:Surface phonon polaritons (SPhPs), the surface-bound electromagnetic modes of a polar material resulting from the coupling of light with optic phonons, offer immense technological opportunities for nanophotonics in the infrared (IR) spectral region. However, once a particular material is chosen, the SPhP characteristics are fixed by the spectral positions of the optic phonon frequencies. Here, we provide a demonstration of how the frequency of these optic phonons can be altered by employing atomic-scale superlattices (SLs) of polar semiconductors using AlN/GaN SLs as an example. Using second harmonic generation (SHG) spectroscopy, we show that the optic phonon frequencies of the SLs exhibit a strong dependence on the layer thicknesses of the constituent materials. Furthermore, new vibrational modes emerge that are confined to the layers, while others are centered at the AlN/GaN interfaces. As the IR dielectric function is governed by the optic phonon behavior in polar materials, controlling the optic phonons provides a means to induce and potentially design a dielectric function distinct from the constituent materials and from the effective-medium approximation of the SL. We show that atomic-scale AlN/GaN SLs instead have multiple Reststrahlen bands featuring spectral regions that exhibit either normal or extreme hyperbolic dispersion with both positive and negative permittivities dispersing rapidly with frequency. Apart from the ability to engineer the SPhP properties, SL structures may also lead to multifunctional devices that combine the mechanical, electrical, thermal, or optoelectronic functionality of the constituent layers. We propose that this effort is another step toward realizing user-defined, actively tunable IR optics and sources.

| S-EPMC6750877 | biostudies-literature

All-angle Negative Reflection with An Ultrathin Acoustic Gradient Metasurface: Floquet-Bloch Modes Perspective and Experimental Verification.

Project description:Metasurface with gradient phase response offers new alternative for steering the propagation of waves. Conventional Snell's law has been revised by taking the contribution of local phase gradient into account. However, the requirement of momentum matching along the metasurface sets its nontrivial beam manipulation functionality within a limited-angle incidence. In this work, we theoretically and experimentally demonstrate that the acoustic gradient metasurface supports the negative reflection for all-angle incidence. The mode expansion theory is developed to help understand how the gradient metasurface tailors the incident beams, and the all-angle negative reflection occurs when the first negative order Floquet-Bloch mode dominates inside the metasurface slab. The coiling-up space structures are utilized to build desired acoustic gradient metasurface, and the all-angle negative reflections have been perfectly verified by experimental measurements. Our work offers the Floquet-Bloch modes perspective for qualitatively understanding the reflection behaviors of the acoustic gradient metasurface, and the all-angle negative reflection characteristic possessed by acoustic gradient metasurface could enable a new degree of the acoustic wave manipulating and be applied in the functional diffractive acoustic elements, such as the all-angle acoustic back reflector.

| S-EPMC5653785 | biostudies-literature

Project description:Lymph is transported along collecting lymphatic vessels by intrinsic and extrinsic pumping. The walls have muscle of a type intermediate between blood-vascular smooth muscle and myocardium; a contracting segment between two valves (a lymphangion) constitutes a pump. This intrinsic mechanism is investigated ex vivo in isolated, spontaneously contracting, perfused segments subjected to controlled external pressures. The reaction to varying afterload is probed by slowly ramping up the outlet pressure until pumping fails. Often the failure occurs when the contraction raises intra-lymphangion pressure insufficiently to overcome the outlet pressure, open the outlet valve and cause ejection, but many segments fail by other means, the mechanisms of which are not clear. We here elucidate those mechanisms by resort to a numerical model. Experimental observations are paired with comparable findings from computer simulations, using a lumped-parameter model that incorporates previously measured valve properties, plus new measurements of active contractile and passive elastic properties, and the dependence of contraction frequency on transmural pressure, all taken from isobaric twitch contraction experiments in the same vessel. Surprisingly, the model predicts seven different possible modes of pump failure, each defined by a different sequence of valve events, with their occurrence depending on the parameter values and boundary conditions. Some, but not all, modes were found experimentally. Further model investigation reveals routes by which a vessel exhibiting one mode of failure might under altered circumstances exhibit another.

| S-EPMC5671905 | biostudies-literature

Controlling optical trapping of metal-dielectric hybrid nanoparticles under ultrafast pulsed excitation: a theoretical investigation.

Project description:Crucial to effective optical trapping is the ability to precisely control the nature of force/potential to be attractive or repulsive. The nature of particles being trapped is as important as the role of laser parameters in determining the stability of the optical trap. In this context, hybrid particles comprising of both dielectric and metallic materials offer a wide range of new possibilities due to their tunable optical properties. On the other hand, femtosecond pulsed excitation is shown to provide additional advantages in tuning of trap stiffness through harnessing optical and thermal nonlinearity. Here we demonstrate that (metal/dielectric hybrid) core/shell type and hollow-core type nanoparticles experience more force than conventional core-type nanoparticles under both continuous-wave and, in particular, ultrafast pulsed excitation. Thus, for the first time, we show how tuning both materials properties as well as the nature of excitation can impart unprecedented control over nanoscale optical trapping and manipulation leading to a wide range of applications.

| S-EPMC9418059 | biostudies-literature

Metal-Halide Perovskite Design for Next-Generation Memories: First-Principles Screening and Experimental Verification.

Project description:Memory devices have been advanced so much, but still it is highly required to find stable and reliable materials with low-power consumption. Halide perovskites (HPs) have been recently adopted for memory application since they have advantages of fast switching based on ionic motion in crystal structure. However, HPs also suffer from poor stability, so it is necessary to improve the stability of HPs. In this regard, combined first-principles screening and experimental verification are performed to design HPs that have high environmental stability and low-operating voltage for memory devices. First-principles screening identifies 2D layered AB2X5 structure as the best candidate switching layer for memory devices, because it has lower formation energy and defect formation energy than 3D ABX3 or other layered structures (A3B2X7, A2BX4). To verify results, all-inorganic 2D layered CsPb2Br5 is synthesized and used in memory devices. The memory devices that use CsPb2Br5 show much better stability and lower operating voltages than devices that use CsPbBr3. These findings are expected to provide new opportunity to design materials for reliable device applications based on calculation, screening, and experimental verification.

| S-EPMC7435252 | biostudies-literature

Experimental neutron scattering evidence for proton polaron in hydrated metal oxide proton conductors.

Project description:Hydration of oxygen-deficient metal oxides causes filling of oxygen vacancies and formation of hydroxyl groups with interstitial structural protons, rotating around the oxygen in localized motion. Thermal activation from 500 to 800?K triggers delocalization of the protons by jumping to adjacent oxygen ions, constituting proton conductivity. We report quantitative analyses of proton and lattice dynamics by neutron-scattering data, which reveal the interaction of protons with the crystal lattice and proton-phonon coupling. The motion for the proton trapped in the elastic crystal field yields Eigen frequencies and coupling constants, which satisfy Holstein's polaron model for electrons and thus constitutes first experimental evidence for a proton polaron at high temperature. Proton jump rates follow a polaron model for cerium-oxygen and hydroxyl stretching modes, which are thus vehicles for proton conductivity. This confirms that the polaron mechanism is not restricted to electrons, but a universal charge carrier transport process.

| S-EPMC5474746 | biostudies-literature

Directional Emission from Metal-Dielectric-Metal Structures: Effect of Mixed Metal Layers, Dye Location and Dielectric Thickness.

Project description:Metal-dielectric-metal (MDM) structures provide directional emission close to the surface normal, which offers opportunities for new design formats in fluorescence based applications. The directional emission arises due to near-field coupling of fluorophores with the optical modes present in the MDM substrate. Reflectivity simulations and dispersion diagrams provide a basic understanding of the mode profiles and the factors that affect the coupling efficiency and the spatial distribution of the coupled emission. This work reveals that the composition of the metal layers, the location of the dye in the MDM substrate and the dielectric thickness are important parameters that can be chosen to tune the color of the emission wavelength, the angle of observation, the angular divergence of the emission and the polarization of the emitted light. These features are valuable for displays and optical signage.

| S-EPMC4381343 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data