Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Label-free multi-photon imaging using a compact femtosecond fiber laser mode-locked by carbon nanotube saturable absorber.

ABSTRACT: We demonstrate label-free multi-photon imaging of biological samples using a compact Er(3+)-doped femtosecond fiber laser mode-locked by a single-walled carbon nanotube (CNT). These compact and low cost lasers have been developed by various groups but they have not been exploited for multiphoton microscopy. Here, it is shown that various multiphoton imaging modalities (e.g. second harmonic generation (SHG), third harmonic generation (THG), two-photon excitation fluorescence (TPEF), and three-photon excitation fluorescence (3PEF)) can be effectively performed on various biological samples using a compact handheld CNT mode-locked femtosecond fiber laser operating in the telecommunication window near 1560nm. We also show for the first time that chlorophyll fluorescence in plant leaves and diatoms can be observed using 1560nm laser excitation via three-photon absorption.

SUBMITTER: Kieu K

PROVIDER: S-EPMC3799676 | biostudies-other | 2013

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Ultrafast nonlinear optical properties of thin-solid DNA film and their application as a saturable absorber in femtosecond mode-locked fiber laser.

Project description:A new extraordinary application of deoxyribonucleic acid (DNA) thin-solid-film was experimentally explored in the field of ultrafast nonlinear photonics. Optical transmission was investigated in both linear and nonlinear regimes for two types of DNA thin-solid-films made from DNA in aqueous solution and DNA-cetyltrimethylammonium chloride (CTMA) in an organic solvent. Z-scan measurements revealed a high third-order nonlinearity with n2 exceeding 10-9 at a wavelength of 1570?nm, for a nonlinarity about five orders of magnitude larger than that of silica. We also demonstrated ultrafast saturable absorption (SA) with a modulation depth of 0.43%. DNA thin solid films were successfully deposited on a side-polished optical fiber, providing an efficient evanescent wave interaction. We built an organic-inorganic hybrid all-fiber ring laser using DNA film as an ultrafast SA and using Erbium-doped fiber as an efficient optical gain medium. Stable transform-limited femtosecond soliton pulses were generated with full width half maxima of 417?fs for DNA and 323?fs for DNA-CTMA thin-solid-film SAs. The average output power was 4.20?mW for DNA and 5.46?mW for DNA-CTMA. Detailed conditions for DNA solid film preparation, dispersion control in the laser cavity and subsequent characteristics of soliton pulses are discussed, to confirm unique nonlinear optical applications of DNA thin-solid-film.

| S-EPMC5269743 | biostudies-literature

A practical topological insulator saturable absorber for mode-locked fiber laser.

Project description:A novel saturable absorber (SA) was fabricated by coating the topological insulator (TI) film on microfiber using pulsed laser deposition (PLD) method. The TISA device had an insertion loss of ~1.25 dB, a saturable intensity of 26.7 MW/cm(2), a modulation depth of ~5.7%, and a nonsaturable loss of 20.5%. Upon employing this SA device, we established a passively mode-locked EDFL and achieved nearly free-chirped soliton pulse with 286 fs of pulse duration and >73 dB of signal to noise ratio (SNR). This result clearly evidences that the PLD is an effective scheme for practical SA device fabrication.

| S-EPMC4346808 | biostudies-other

Passively mode-locked fiber laser by a cell-type WS2 nanosheets saturable absorber.

Project description:A cell-type saturable absorber has been demonstrated by filling the single mode photonic crystal fiber (SMPCF) with tungsten disulfide (WS2) nanosheets. The modulation depth, saturable intensity, and non-saturable loss of this SA are measured to be 3.53%, 159 MW/cm(2) and 23.2%, respectively. Based on this SA, a passively mode-locked EDF laser has been achieved with pulse duration of 808 fs and repetition rate of 19.57 MHz, and signal-noise-ratio (SNR) of 60.5 dB. Our results demonstrate that the cell-type WS2 nanosheets SA can serve as a good candidate for short-pulse mode locker.

| S-EPMC4515829 | biostudies-other

Can silicon carbide serve as a saturable absorber for passive mode-locked fiber lasers?

Project description:The study presents a novel demonstration of a passively mode-locked erbium-doped fiber laser (EDFL) that is based on a silicon carbide (SixC1-x) saturable absorber. When the C/Si composition ratio is increased to 1.83, the SixC1-x film transforms from two-photon absorption to nonlinear saturable absorption, and the corresponding value reaches -3.9 × 10(-6) cm/W. The Si-rich SixC1-x film cannot mode lock the EDFL because it induced high intracavity loss through two-photon absorption. Even when a stoichiometric SiC is used, the EDFL is mode locked, similar to an EDFL operating under weak nonlinear-polarization-rotation condition. A C-rich SixC1-x film containing sp(2)-orbital C-C bonds with a linear absorbance of 0.172 and nonlinear absorbance of 0.04 at a 181 MW/cm(2) saturation intensity demonstrates nonlinear transmittance. The C-rich SixC1-x saturable absorber successfully generates a short mode-locked EDFL pulse of 470 fs. The fluctuation of the pulse-train envelope dropps considerably from 11.6% to 0.8% when a strong saturable-absorption-induced self-amplitude modulation process occurs in the C-rich SixC1-x film.

| S-EPMC4642298 | biostudies-other

Passively synchronized Q-switched and mode-locked dual-band Tm3+:ZBLAN fiber lasers using a common graphene saturable absorber.

Project description:Dual-band fiber lasers are emerging as a promising technology to penetrate new industrial and medical applications from their dual-band properties, in addition to providing compactness and environmental robustness from the waveguide structure. Here, we demonstrate the use of a common graphene saturable absorber and a single gain medium (Tm3+:ZBLAN fiber) to implement (1) a dual-band fiber ring laser with synchronized Q-switched pulses at wavelengths of 1480 nm and 1840 nm, and (2) a dual-band fiber linear laser with synchronized mode-locked pulses at wavelengths of 1480 nm and 1845 nm. Q-switched operation at 1480 nm and 1840 nm is achieved with a synchronized repetition rate from 20 kHz to 40.5 kHz. For synchronous mode-locked operation, pulses with full-width at half maximum durations of 610 fs and 1.68 ps at wavelengths of 1480 nm and 1845 nm, respectively, are obtained at a repetition rate of 12.3 MHz. These dual-band pulsed sources with an ultra-broadband wavelength separation of ~360 nm will add new capabilities in applications including optical sensing, spectroscopy, and communications.

| S-EPMC5090962 | biostudies-literature

Ytterbium-doped fiber laser passively mode locked by few-layer Molybdenum Disulfide (MoS2) saturable absorber functioned with evanescent field interaction.

Project description:By coupling few-layer Molybdenum Disulfide (MoS2) with fiber-taper evanescent light field, a new type of MoS2 based nonlinear optical modulating element had been successfully fabricated as a two-dimensional layered saturable absorber with strong light-matter interaction. This MoS2-taper-fiber device is not only capable of passively mode-locking an all-normal-dispersion ytterbium-doped fiber laser and enduring high power laser excitation (up to 1 W), but also functions as a polarization sensitive optical modulating component (that is, different polarized light can induce different nonlinear optical response). Thanks to the combined advantages from the strong nonlinear optical response in MoS2 together with the sufficiently-long-range interaction between light and MoS2, this device allows for the generation of high power stable dissipative solitons at 1042.6 nm with pulse duration of 656 ps and a repetition rate of 6.74 MHz at a pump power of 210 mW. Our work may also constitute the first example of MoS2-enabled wave-guiding photonic device, and potential y give some new insights into two-dimensional layered materials related photonics.

| S-EPMC4161963 | biostudies-other

Custom fabrication and mode-locked operation of a femtosecond fiber laser for multiphoton microscopy.

Project description:Solid-state femtosecond lasers have stimulated the broad adoption of multiphoton microscopy in the modern laboratory. However, these devices remain costly. Fiber lasers offer promise as a means to inexpensively produce ultrashort pulses of light suitable for nonlinear microscopy in compact, robust and portable devices. Although encouraging, the initial methods reported in the biomedical engineering community to construct home-built femtosecond fiber laser systems overlooked fundamental aspects that compromised performance and misrepresented the significant financial and intellectual investments required to build these devices. Here, we present a practical protocol to fabricate an all-normal-dispersion ytterbium (Yb)-doped femtosecond fiber laser oscillator using commercially-available parts (plus standard optical components and extra-cavity accessories) as well as basic fiber splicing and laser pulse characterization equipment. We also provide a synthesis of established protocols in the laser physics community, but often overlooked in other fields, to verify true versus seemingly (partial or noise-like) mode-locked performance. The approaches described here make custom fabrication of femtosecond fiber lasers more accessible to a wide range of investigators and better represent the investments required for the proper laser design, fabrication and operation.

| S-EPMC6414530 | biostudies-literature

Single-wall carbon nanotubes and graphene oxide-based saturable absorbers for low phase noise mode-locked fiber lasers.

Project description:Low phase noise mode-locked fiber laser finds important applications in telecommunication, ultrafast sciences, material science, and biology, etc. In this paper, two types of carbon nano-materials, i.e. single-wall carbon nanotube (SWNT) and graphene oxide (GO), are investigated as efficient saturable absorbers (SAs) to achieve low phase noise mode-locked fiber lasers. Various properties of these wall-paper SAs, such as saturable intensity, optical absorption and degree of purity, are found to be key factors determining the performance of the ultrafast pulses. Reduced-noise femtosecond fiber lasers based on such carbon-based SAs are experimentally demonstrated, for which the phase noise has been reduced by more than 10?dB for SWNT SAs and 8?dB for GO SAs at 10?kHz. To the best of our knowledge, this is the first investigation on the relationship between different carbon material based SAs and the phase noise of mode-locked lasers. This work paves the way to generate high-quality low phase noise ultrashort pulses in passively mode-locked fiber lasers.

| S-EPMC4850480 | biostudies-literature

High output mode-locked laser empowered by defect regulation in 2D Bi2O2Se saturable absorber.

Project description:Atomically thin Bi2O2Se has emerged as a novel two-dimensional (2D) material with an ultrabroadband nonlinear optical response, high carrier mobility and excellent air stability, showing great potential for the realization of optical modulators. Here, we demonstrate a femtosecond solid-state laser at 1.0 µm with Bi2O2Se nanoplates as a saturable absorber (SA). Upon further defect regulation in 2D Bi2O2Se, the average power of the mode-locked laser is improved from 421 mW to 665 mW, while the pulse width is decreased from 587 fs to 266 fs. Moderate Ar+ plasma treatments are employed to precisely regulate the O and Se defect states in Bi2O2Se nanoplates. Nondegenerate pump-probe measurements show that defect engineering effectively accelerates the trapping rate and defect-assisted Auger recombination rate of photocarriers. The saturation intensity is improved from 3.6 ± 0.2 to 12.8 ± 0.6 MW cm-2 after the optimized defect regulation. The enhanced saturable absorption and ultrafast carrier lifetime endow the high-performance mode-locked laser with both large output power and short pulse duration.

| S-EPMC9256711 | biostudies-literature

Ultrafast fiber laser at 1570 nm based on organic material as saturable absorber.

Project description:In this work, we demonstrated Poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) as a saturable absorber (SA) to produce mode-locking operation in different length of Erbium-doped fiber laser (EDFL). The PEDOT: PSS was embedded into polyvinyl alcohol to form a thin film that acts as an absorber into the laser setup. The three different mode-locked EDFL were successfully demonstrated with different cavity length and output coupler ratio. The pulse repetition rate/width of 3.417 MHz/710 fs, 4.831 MHz/510 fs, and 6.049 MHz/460 fs were obtained by utilizing optical coupler/ cavity length of 20:80/60.7 m, 10:90/42.7 m, and 5:95/33.7 m, respectively. All experiments generated a stable and mode-locked operation at a central wavelength of 1570.76 nm, 1570.3 nm, and 1569.95 nm with 3 dB bandwidth of 4.8 nm, 5.6 nm, and 6.5 nm, respectively. The long-time stability of the ultrafast fiber lasers was investigated for each setup via 120 min. The proposed PEDOT: PSS has proven as a promising material to induce mode-locking operation in different fiber laser setup.

| S-EPMC9345930 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data