Impedance matched thin metamaterials make metals absorbing.
Ontology highlight
ABSTRACT:
SUBMITTER: Mattiucci N
PROVIDER: S-EPMC3826104 | biostudies-other | 2013
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Causality of linear time-invariant systems inherently defines the wave-matter interaction process in wave physics. This principle imposes strict constraints on the interfacial response of materials on various physical platforms. A typical consequence is that a delicate balance has to be struck between the conflicting bandwidth and geometric thickness when constructing a medium with desired impedance, which makes it challenging to realize broadband impedance modulation with compact structures. In pursuit of improvement, the over-damped recipe and the reduced excessive response recipe are creatively presented in this work. As a proof-of-concept demonstration, we construct a metamaterial with intensive mode density that supports strong non-locality over a frequency band from 320 Hz to 6400 Hz. Under the guidelines of the over-damped recipe and the reduced excessive response recipe, the metamaterial realizes impedance matching to air and exhibits broadband near-perfect absorption without evident impedance oscillation and absorption dips in the working frequency band. We further present a dual-functional design capable of frequency-selective absorption and reflection by concentrating the resonance modes in three frequency bands. Our research reveals the significance of over-damped recipe and the strong non-local effect in broadband impedance modulation, which may open up avenues for constructing efficient artificial impedance boundaries for energy absorption and other wave manipulation.
| S-EPMC9440717 | biostudies-literature
Project description:Dynamic multi-frequency analysis (DMFA) is capable of acquiring high-quality frequency response of electrochemical systems under non-stationary conditions in a broad range of frequencies. In this work, we used DMFA to study the kinetics of (de-)intercalation of univalent cations (Na+ and K+) in thin films of nickel hexacyanoferrate (NiHCF) during cyclic voltammetry. For this system, the classic stationary electrochemical impedance spectroscopy fails due to the instability of the oxidized form of NiHCF. We are showing that such spectra can be fitted with a physical model described by a simple two-step intercalation mechanism: an adsorption step followed by an insertion step. The extracted kinetic parameters are depending on the state of charge as well on the nature of the inserted cation.
| S-EPMC6919401 | biostudies-literature
Project description:Independent control of the magnetic and electric properties of two-part and three-part ferrite composites is demonstrated through variation of particle size and volume fraction of ferrite inclusions. This provides a route to creating broadband impedance-matched composites with tailored high refractive-index values. A two-part composite comprising NiZn ferrite in a PTFE dielectric host with approximately equal values of relative real permittivity and permeability up to 100 MHz is manufactured. The refractive index for NiZn–PTFE composites, measured at 20 MHz, is 6.1 for NiZn volume fraction of 50%vol. and 6.9 for NiZn volume fraction of 70%vol. Similarly, we have characterised a three-part composite with a refractive index of approximately 16 up to 60 MHz. The three-part composite comprises NiZn and MnZn ferrites in a PTFE dielectric host matrix with a percentage volume ratio of 65%: 15%: 20%, respectively.
| S-EPMC9500025 | biostudies-literature
Project description:We propose a new family of impedance-matched chiral metasurfaces that offer arbitrary polarization control at two different frequencies. To this end, two main problems are addressed: (1) determination of the required surface impedances for a certain user-defined chiral functionality at two frequencies and (2) their physical realization at microwaves. The first milestone is achieved through a proposed synthesis method that combines a semi-analytical method and a nonlinear optimization technique. In particular, the impedances are computed such that the devised chiral metasurface is also impedance-matched to a terminating medium. The chiral metasurfaces are then physically realized at microwaves by cascading layers of rotated arrays of multiple concentric rectangular copper rings. We establish that these proposed unit cells offer distinct dual-resonances that can be arbitrarily and independently tuned for two orthogonal linear polarizations at each of the two operating frequencies. This allows simultaneous physical mapping of the required surface impedances at two frequencies. The versatility and generality of the proposed numerical and physical solutions are demonstrated through two design examples: A dual-band circular polarization selective surface (CPSS) and a dual-band polarization rotator (PR). The dual-band CPSS is further confirmed experimentally at 20 GHz and 30 GHz based on a free-space quasi-optical system.
| S-EPMC5823897 | biostudies-literature
Project description:Engineering metamaterials with tunable resonances are of great importance for improving the functionality and flexibility of terahertz (THz) systems. An ongoing challenge in THz science and technology is to create large-area active metamaterials as building blocks to enable efficient and precise control of THz signals. Here, an active metamaterial device based on enhancement-mode transparent amorphous oxide thin-film transistor arrays for THz modulation is demonstrated. Analytical modelling based on full-wave techniques and multipole theory exhibits excellent consistent with the experimental observations and reveals that the intrinsic resonance mode at 0.75 THz is dominated by an electric response. The resonant behavior can be effectively tuned by controlling the channel conductivity through an external bias. Such metal/oxide thin-film transistor based controllable metamaterials are energy saving, low cost, large area and ready for mass-production, which are expected to be widely used in future THz imaging, sensing, communications and other applications.
| S-EPMC4802223 | biostudies-literature
Project description:Thermal detectors are a cornerstone of infrared and terahertz technology due to their broad spectral range. These detectors call for efficient absorbers with a broad spectral response and minimal thermal mass. A common approach is based on impedance-matching the sheet resistance of a thin metallic film to half the free-space impedance. Thereby, one can achieve a wavelength-independent absorptivity of up to 50%. However, existing absorber films typically require a thickness of the order of tens of nanometers, which can significantly deteriorate the response of a thermal transducer. Here, we present the application of ultrathin gold (2?nm) on top of a surfactant layer of oxidized copper as an effective infrared absorber. An almost wavelength-independent and long-time stable absorptivity of 47(3)%, ranging from 2 ?m to 20 ?m, can be obtained. The presented absorber allows for a significant improvement of infrared/terahertz technologies in general and thermal detectors in particular.
| S-EPMC7195431 | biostudies-literature
Project description:The ability to harvest thermal energy and manipulate heat fluxes has recently attracted a great deal of research interest because this is critical to achieve efficient solar-to-thermal energy conversion in the technology of concentrated solar thermal collectors. Thermal metamaterials with engineered thermal conduction are often utilized to control the diffusive heat flow in ways otherwise not possible with naturally occurring materials. In this work, we adopt the transformation thermodynamics approach to design an annular fan-shaped thermal metamaterial which is capable of guiding heat fluxes and concentrating thermal energy to the central region of the metamaterial device without disturbing the temperature profile outside the structure--a fascinating and unique feature impossibly achieved with homogeneous materials. In experiment, this rationally-designed metamaterial structure demonstrates extreme heat flux compression from both line-shaped and point thermal sources with measured concentration efficiency up to 83.1%, providing the first experimental realization of our recent theoretical prediction (T. Han et al., Energy Environ. Sci., 2013, 6, 3537-3541). These unprecedented results may open up new possibilities for engineering thermal materials with desired properties that can be used for dramatically enhancing the efficiency of the existing solar thermal collectors.
| S-EPMC4479797 | biostudies-other
Project description:Window coatings with dynamic solar transmittance represent an excellent opportunity to reduce building heating and cooling loads, which account for >40% of energy consumed by the built environment. In particular, inorganic vanadium dioxide-based thermochromic coatings offer long lifetimes (>30 years) and can be passively integrated into a window system without additional electronics or power requirements. However, their limited solar modulation depth and wide phase-change hysteresis have traditionally restricted their ability to adapt to changing weather conditions. Here, we derive an optical performance limit for thin film vanadium dioxide coatings, which we find to be far beyond the current literature. Furthermore, we experimentally demonstrate a solution-processed multilayer thin film coating that uses temperature-dependent optical impedance matching to approach the optical performance limit. The thin film coating demonstrated has a record solar transmittance modulation of 21.8% while maintaining a high level of visible transparency (?50%) and minimal hysteresis (?10 °C). This work represents a step-change in thin film thermochromic window coatings and, as a result, establishes planar thin film vanadium dioxide as the most viable morphology for high-performance thermochromic windows.
| S-EPMC7033656 | biostudies-literature
Project description:A ruthenium oxide (RuOx) electrode was used to monitor contractile events of human pluripotent stem cells-derived cardiomyocytes (hPSC-CMs) through electrical impedance spectroscopy (EIS). Using RuOx electrodes presents an advantage over standard thin film Pt electrodes because the RuOx electrodes can also be used as electrochemical sensor for pH, O2, and nitric oxide, providing multisensory functionality with the same electrode. First, the EIS signal was validated in an optically transparent well-plate setup using Pt wire electrodes. This way, visual data could be recorded simultaneously. Frequency analyses of both EIS and the visual data revealed almost identical frequency components. This suggests both the EIS and visual data captured the similar events of the beating of (an area of) hPSC-CMs. Similar EIS measurement was then performed using the RuOx electrode, which yielded comparable signal and periodicity. This mode of operation adds to the versatility of the RuOx electrode's use in in vitro studies.
| S-EPMC7923073 | biostudies-literature
Project description:We investigate thin film sensing capabilities of a terahertz (THz) metamaterial, which comprises of an array of single split gap ring resonators (SRRs). The top surface of the proposed metamaterial is covered with a thin layer of analyte in order to examine various sensing parameters. The sensitivity and corresponding figure of merit (FoM) of the odd and even resonant modes are analyzed with respect to different thicknesses of the coated analyte film. The sensing parameters of different resonance modes are elaborated and explained with appropriate physical explanations. We have also employed a semi-analytical transmission line model in order to validate our numerically simulated observations. Such study should be very useful for the development of metamaterials based sensing devices, bio-sensors etc in near future.
| S-EPMC5544699 | biostudies-other