Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhancing thermoelectric properties of organic composites through hierarchical nanostructures.

ABSTRACT: Organic thermoelectric (TE) materials are very attractive due to easy processing, material abundance, and environmentally-benign characteristics, but their potential is significantly restricted by the inferior thermoelectric properties. In this work, noncovalently functionalized graphene with fullerene by ?-? stacking in a liquid-liquid interface was integrated into poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate). Graphene helps to improve electrical conductivity while fullerene enhances the Seebeck coefficient and hinders thermal conductivity, resulting in the synergistic effect on enhancing thermoelectric properties. With the integration of nanohybrids, the electrical conductivity increased from ~10,000 to ~70,000?S/m, the thermal conductivity changed from 0.2 to 2?W·K(-1)m(-1) while the Seebeck coefficient was enhanced by around 4-fold. As a result, nanohybrids-based polymer composites demonstrated the figure of merit (ZT) as high as 6.7 × 10(-2), indicating an enhancement of more than one order of magnitude in comparison to single-phase filler-based polymer composites with ZT at the level of 10(-3).

SUBMITTER: Zhang K

PROVIDER: S-EPMC3861799 | biostudies-other | 2013

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Cobalt-Doped Manganese Dioxide Hierarchical Nanostructures for Enhancing Pseudocapacitive Properties.

Project description:Herein, overall improvement in the electrochemical performance of manganese dioxide is achieved through fine-tuning the microstructure of partially Co-doped manganese dioxide nanomaterial using facile hydrothermal method with precise control of preparative parameters. The structural investigation exhibits formation of a multiphase compound accompanied by controlled reflections of α-MnO2 as well as γ-MnO2 crystalline phases. The morphological examination manifests the presence of MnO2 nanowires having a width of 70-80 nm and a length of several microns. The Co-doped manganese dioxide electrode displayed a particular capacitive behavior along with a rising order of capacitance concerning with increased cobalt ion concentration suitable for certain limits. The value of specific capacitance achieved by a 5% Co-doped manganese dioxide sample was 1050 F g-1 at 0.5 A g-1, which was nearly threefold greater than that achieved by a bare manganese dioxide electrode. Furthermore, Co-doped manganese dioxide nanocomposite electrode exhibits exceptional capacitance retention (92.7%) till 10,000 cycles. It shows the good cyclability as well as stability of the material. Furthermore, we have demonstrated the solid-state supercapacitor with good energy and power density.

| S-EPMC7931399 | biostudies-literature

Enhancing the Figure of Merit of Heavy-Band Thermoelectric Materials Through Hierarchical Phonon Scattering.

Project description:Hierarchical scattering is suggested as an effective strategy to enhance the figure of merit zT of heavy-band thermoelectric materials. Heavy-band FeNbSb half-Heusler system with intrinsically low carrier mean free path is demonstrated as a paradigm. An enhanced zT of 1.34 is obtained at 1150 K for the Fe1.05Nb0.75Ti0.25Sb compound with intentionally designed hierarchical scattering centers.

| S-EPMC5069587 | biostudies-literature

Green Synthesis of Hierarchical Metal-Organic Framework/Wood Functional Composites with Superior Mechanical Properties.

Project description:The applicability of advanced composite materials with hierarchical structure that conjugate metal-organic frameworks (MOFs) with macroporous materials is commonly limited by their inferior mechanical properties. Here, a universal green synthesis method for the in situ growth of MOF nanocrystals within wood substrates is introduced. Nucleation sites for different types of MOFs are readily created by a sodium hydroxide treatment, which is demonstrated to be broadly applicable to different wood species. The resulting MOF/wood composite exhibits hierarchical porosity with 130 times larger specific surface area compared to native wood. Assessment of the CO2 adsorption capacity demonstrates the efficient utilization of the MOF loading along with similar adsorption ability to that of pure MOF. Compression and tensile tests reveal superior mechanical properties, which surpass those obtained for polymer substrates. The functionalization strategy offers a stable, sustainable, and scalable platform for the fabrication of multifunctional MOF/wood-derived composites with potential applications in environmental- and energy-related fields.

| S-EPMC7141016 | biostudies-literature

Carbon Nanostructures-Silica Aerogel Composites for Adsorption of Organic Pollutants.

Project description:Silica aerogels are a class of materials that can be tailored in terms of their final properties and surface chemistry. They can be synthesized with specific features to be used as adsorbents, resulting in improved performance for wastewater pollutants' removal. The purpose of this research was to investigate the effect of amino functionalization and the addition of carbon nanostructures to silica aerogels made from methyltrimethoxysilane (MTMS) on their removal capacities for various contaminants in aqueous solutions. The MTMS-based aerogels successfully removed various organic compounds and drugs, achieving adsorption capacities of 170 mg⋅g-1 for toluene and 200 mg⋅g-1 for xylene. For initial concentrations up to 50 mg⋅L-1, removals greater than 71% were obtained for amoxicillin, and superior to 96% for naproxen. The addition of a co-precursor containing amine groups and/or carbon nanomaterials was proven to be a valuable tool in the development of new adsorbents by altering the aerogels' properties and enhancing their adsorption capacities. Therefore, this work demonstrates the potential of these materials as an alternative to industrial sorbents due to their high and fast removal efficiency, less than 60 min for the organic compounds, towards different types of pollutants.

| S-EPMC10059775 | biostudies-literature

Preparation and Thermoelectric Properties Study of Bipyridine-Containing Polyfluorene Derivative/SWCNT Composites.

Project description:Polymer/inorganic thermoelectric composites have witnessed rapid progress in recent years, but most of the studies have focused on the traditional conducting polymers. The limited structures of traditional conducting polymers restrain the development of organic thermoelectric composites. Herein, we report the preparation and thermoelectric properties of a series of composites films based on SWCNTs and bipyridine-containing polyfluorene derivatives. The value of the power factor around 12 μW m-1 K-2 was achieved for the composite F8bpy/SWCNTs with a mass ratio of 50/50, and the maximum value of 62.3 μW m-1 K-2 was obtained when the mass ratio reached 10/90. Moreover, taking advantage of the bipyridine unit could chelate various kinds of metal ions to form polymer complexes. The enhanced power factor of 87.3 μW m-1 K-2 was obtained for composite F8bpy-Ni/SWCNTs with a mass ratio of 50/50. Finally, the thermoelectric properties of the bipyridine-containing polyfluorene derivative/SWCNT composites were conveniently tuned by chelating with different metal ions.

| S-EPMC6419042 | biostudies-literature

Influence of Polyvinylpyrrolidone on Thermoelectric Properties of Melt-Mixed Polymer/Carbon Nanotube Composites.

Project description:For thermoelectric applications, both p- and n-type semi-conductive materials are combined. In melt-mixed composites based on thermoplastic polymers and carbon nanotubes, usually the p-type with a positive Seebeck coefficient (S) is present. One way to produce composites with a negative Seebeck coefficient is to add further additives. In the present study, for the first time, the combination of single-walled carbon nanotubes (SWCNTs) with polyvinylpyrrolidone (PVP) in melt-mixed composites is investigated. Polycarbonate (PC), poly(butylene terephthalate) (PBT), and poly(ether ether ketone) (PEEK) filled with SWCNTs and PVP were melt-mixed in small scales and thermoelectric properties of compression moulded plates were studied. It could be shown that a switch in the S-value from positive to negative values was only possible for PC composites. The addition of 5 wt% PVP shifted the S-value from 37.8 µV/K to -31.5 µV/K (2 wt% SWCNT). For PBT as a matrix, a decrease in the Seebeck coefficient from 59.4 µV/K to 8.0 µV/K (8 wt% PVP, 2 wt% SWCNT) could be found. In PEEK-based composites, the S-value increased slightly with the PVP content from 48.0 µV/K up to 54.3 µV/K (3 wt% PVP, 1 wt% SWCNT). In addition, the long-term stability of the composites was studied. Unfortunately, the achieved properties were not stable over a storage time of 6 or 18 months. Thus, in summary, PVP is not suitable for producing long-term stable, melt-mixed n-type SWCNT composites.

| S-EPMC9863564 | biostudies-literature

Programmed Self-Assembly of Hierarchical Nanostructures through Protein-Nanoparticle Coengineering.

Project description:Hierarchical organization of macromolecules through self-assembly is a prominent feature in biological systems. Synthetic fabrication of such structures provides materials with emergent functions. Here, we report the fabrication of self-assembled superstructures through coengineering of recombinant proteins and nanoparticles. These structures feature a highly sophisticated level of multilayered hierarchical organization of the components: individual proteins and nanoparticles coassemble to form discrete assemblies that collapse to form granules, which then further self-organize to generate superstructures with sizes of hundreds of nanometers. The components within these superstructures are dynamic and spatially reorganize in response to environmental influences. The precise control over the molecular organization of building blocks imparted by this protein-nanoparticle coengineering strategy provides a method for creating hierarchical hybrid materials.

| S-EPMC5848079 | biostudies-literature

Competitive coordination strategy for the synthesis of hierarchical-pore metal-organic framework nanostructures.

Project description:Metal-organic frameworks (MOFs) usually have micropores smaller than 2 nm, which may restrict their applications in some cases. Hierarchical-pore MOFs (H-MOFs) are a new family of MOF materials, possessing both micro- and mesopores to address this problem. Here we demonstrate a competitive coordination strategy for the synthesis of H-MOF nanostructures, such as two-dimensional (2D) H-MOF nanosheets and H-MOF nanocubes, evolving through an etching process tuned by a competitive ligand. The as-synthesized 2D H-MOF nanosheets can serve as a substrate to in situ immobilize Pd nanoparticles to achieve a surfactant-free Pd catalyst, by means of a simple soaking method of Pd2+ precursors. Combined with the unique structure and gas adsorption capacity of H-MOF-5, the Pd-H-MOF-5 catalyst exhibits superior catalytic performance.

| S-EPMC5450591 | biostudies-literature

Enhancing biosensing sensitivity of metal nanostructures through site-selective binding.

Project description:The localised surface plasmon resonance (LSPR) at the surface of metal nanostructures can induce a highly intense electromagnetic (EM) field, which is confined to the edges with big curvature or at narrow gaps between nanostructures. Therefore, the localisation of target molecules at these sites is crucial to achieve high sensitivity in LSPR-based biosensors. To this end, we fabricated a 40?nm high gold nano-truncated cone (GNTC) array using thermal nanoimprint lithography. As the EM field is most intense at the side surface and relatively weak at the top surface of GNTC, we improved the detection sensitivity by blocking the top surface with oxides to limit adsorption of antibodies and antigens to the top surface. We observed the difference in sensitivity by detecting ?-fetoprotein (AFP) on the oxide-capped and uncapped GNTC arrays through sandwich immunoassay and enzymatic precipitation. The capped GNTC array exhibited higher detection sensitivity than the uncapped one. Particularly, six-fold enhancement of sensitivity was achieved in the serum sample. We used atomic force microscopy and electron microscopy to validate that the deposition of the oxides on the top surface of GNTC effectively blocked the adsorption of the biomolecules and the target molecules were preferentially adsorbed on the side surfaces.

| S-EPMC6978459 | biostudies-literature

Elastic conducting polymer composites in thermoelectric modules.

Project description:The rapid growth of wearables has created a demand for lightweight, elastic and conformal energy harvesting and storage devices. The conducting polymer poly(3,4-ethylenedioxythiophene) has shown great promise for thermoelectric generators, however, the thick layers of pristine poly(3,4-ethylenedioxythiophene) required for effective energy harvesting are too hard and brittle for seamless integration into wearables. Poly(3,4-ethylenedioxythiophene)-elastomer composites have been developed to improve its mechanical properties, although so far without simultaneously achieving softness, high electrical conductivity, and stretchability. Here we report an aqueously processed poly(3,4-ethylenedioxythiophene)-polyurethane-ionic liquid composite, which combines high conductivity (>140 S cm-1) with superior stretchability (>600%), elasticity, and low Young's modulus (<7 MPa). The outstanding performance of this organic nanocomposite is the result of favorable percolation networks on the nano- and micro-scale and the plasticizing effect of the ionic liquid. The elastic thermoelectric material is implemented in the first reported intrinsically stretchable organic thermoelectric module.

| S-EPMC7080746 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data