Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fe-catalyzed growth of one-dimensional α-Si3N4 nanostructures and their cathodoluminescence properties.

ABSTRACT: Preparation of nanomaterials with various morphologies and exploiting their novel physical properties are of vital importance in nanoscientific field. Similarly to the III-N compound semiconductors, Si3N4 nanostructures also could be potentially used for making optoelectronic devices. In this paper, we report on an improved Fe-catalyzed chemical vapour deposition method for synthesizing ultra-long α-Si3N4 nanobelts along with a few nanowires and nanobranches on a carbon felt substrate. The ultra-long α-Si3N4 nanobelts grew via a combined VLS-base and nanobranches via a combined double-stage VLS-base and VS-tip mechanism, as well as nanowires via VLS-tip mechanism. The three individual nanostructures showed variant optical properties as revealed by a cathodoluminescence spectroscopy. A single α-Si3N4 nanobelt or nanobranch gave a strong UV-blue emission band as well as a broad red emission, whereas a single α-Si3N4 nanowire exhibited only a broad UV-blue emission. The results reported would be useful in developing new photoelectric nanodevices with tailorable or tunable properties.

SUBMITTER: Huang J

PROVIDER: S-EPMC3863818 | biostudies-other | 2013

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Morphological evolution, growth mechanism, and magneto-transport properties of silver telluride one-dimensional nanostructures.

Project description:Single crystalline one-dimensional (1D) nanostructures of silver telluride (Ag2Te) with well-controlled shapes and sizes were synthesized via the hydrothermal reduction of sodium tellurite (Na2TeO3) in a mixed solution. The morphological evolution of various 1D nanostructures was mainly determined by properly controlling the nucleation and growth process of Ag2Te in different reaction times. Based on the transmission electron microscopy and scanning electron microscopy studies, the formation mechanism for these 1D nanostructures was rationally interpreted. In addition, the current-voltage (I-V) characteristics as a function of magnetic field of the highly single crystal Ag2Te nanowires were systematically measured. From the investigation of I-V characteristics, we have observed a rapid change of the current in low magnetic field, which can be used as the magnetic field sensor. The magneto-resistance behavior of the Ag2Te nanowires with monoclinic structure was also investigated. Comparing to the bulk and thin film materials, we found that there is generally a larger change in R (T) as the sample size is reduced, which indicates that the size of the sample has a certain impact on magneto-transport properties. Simultaneously, some possible reasons resulting in the observed large positive magneto-resistance behavior are discussed.

| S-EPMC3765103 | biostudies-literature

Synthesis and Microwave Absorbing Properties of Porous One-Dimensional Nickel Sulfide Nanostructures.

Project description:One-dimensional (1D) porous NixSy nanostructures have been successfully fabricated by two-step method consisting of solvothermal and subsequent annealing process. The suitable heat treatment temperature and reaction time play crucial roles in the final structure, morphology, as well as performance. The uniform and perfect porous NixSy nanostructures obtained at 310°C exhibit outstanding microwave absorption performances. A minimum reflection loss of -35.6 dB is achieved at 8.5 GHz, and the effective absorption bandwidth almost covers 14.5 GHz with the absorber thickness range of 2.0-5.0 mm. It can be supposed that this porous structure with rough surface which is favor for increasing the microwave multiple reflection and scattering, contributes a high-performance electromagnetic absorption.

| S-EPMC6193059 | biostudies-literature

Optical quantum confinement and photocatalytic properties in two-, one- and zero-dimensional nanostructures.

Project description:Low-dimensional nanomaterials have been explored extensively in the last decades, partly fuelled by the new possibilities for tuning and controlling their electronic properties. In a broader perspective within catalysis, two-, one- and zero-dimensional (2D, 1D and 0D) inorganic nanomaterials represent a bridge between the selectivity of molecular catalysts and the high performance and stability of inorganic catalysts. As a consequence of the low dimensions, higher surface areas are obtained but also introduce new physics and increased tuneability of the electronic states in the nanostructured system. Herein, we derive the commonly used equations for optical transitions and carrier confinement in semiconductors and discuss their effect on the optical and photocatalytic properties of direct band and indirect band gap materials. In particular, the physical properties of the optical and photocatalytic properties of Fe2O3 and ZnO will be used to exemplify the effects of the low dimensionality. Carrier confinement effects with changes in the density of states, band gap/shift of band edges will be outlined together with their effects on the tuneability of the material and their wider application as photocatalytic materials.

| S-EPMC6170533 | biostudies-literature

Gas sensors based on semiconducting metal oxide one-dimensional nanostructures.

Project description:This article provides a comprehensive review of recent (2008 and 2009) progress in gas sensors based on semiconducting metal oxide one-dimensional (1D) nanostructures. During last few years, gas sensors based on semiconducting oxide 1D nanostructures have been widely investigated. Additionally, modified or doped oxide nanowires/nanobelts have also been synthesized and used for gas sensor applications. Moreover, novel device structures such as electronic noses and low power consumption self-heated gas sensors have been invented and their gas sensing performance has also been evaluated. Finally, we also point out some challenges for future investigation and practical application.

| S-EPMC3267202 | biostudies-literature

Cubes to Cubes: Organization of MgO Particles into One-Dimensional and Two-Dimensional Nanostructures.

Project description:Developing simple, inexpensive, and environmentally benign approaches to integrate morphologically well-defined nanoscale building blocks into larger high surface area materials is a key challenge in materials design and processing. In this work, we investigate the fundamental surface phenomena between MgO and water (both adsorption and desorption) with particles prepared via a vapor-phase process (MgO nanocubes) and a modified aerogel process (MgO(111) nanosheets). Through these studies, we unravel a strategy to assemble individual MgO nanoparticles into extended faceted single-crystalline MgO nanosheets and nanorods with well-defined exposed surfaces and edges. This reorganization can be triggered by the presence of H2O vapor or bulk liquid water. Water adsorption and the progressive conversion of vapor-phase grown oxide particles into hydroxides give rise to either one-dimensional or two-dimensional (1D or 2D) structures of high dispersion and surface area. The resulting Mg(OH)2 lamella with a predominant (001) surface termination are well-suited precursor structures for their topotactic conversion into laterally extended and uniform MgO(111) grain surface configurations. To understand the potential of polar (111) surfaces for faceting and surface reconstruction effects associated with water desorption, we investigated the stability of MgO(111) nanosheets during vacuum annealing and electron beam exposure. The significant surface reconstruction of the MgO(111) surfaces observed shows that adsorbate-free (111)-terminated surfaces of unsupported MgO nanostructures reconstruct rather than remain as charged planes of either three-fold coordinated O2- ion or Mg2+ ions. Thus, here we demonstrate the role water can play in surface formation and reconstruction by bridging wet chemical and surface science inspired approaches.

| S-EPMC8343528 | biostudies-literature

Experimental evidence of icosahedral and decahedral packing in one-dimensional nanostructures.

Project description:The packing of spheres is a subject that has drawn the attention of mathematicians and philosophers for centuries and that currently attracts the interest of the scientific community in several fields. At the nanoscale, the packing of atoms affects the chemical and structural properties of the material and, hence, its potential applications. This report describes the experimental formation of 5-fold nanostructures by the packing of interpenetrated icosahedral and decahedral units. These nanowires, formed by the reaction of a mixture of metal salts (Au and Ag) in the presence of oleylamine, are obtained when the chemical composition is specifically Ag/Au = 3:1. The experimental images of the icosahedral nanowires have a high likelihood with simulated electron micrographs of structures formed by two or three Boerdijk-Coxeter-Bernal helices roped on a single structure, whereas for the decahedral wires, simulations using a model of adjacent decahedra match the experimental structures. To our knowledge, this is the first report of the synthesis of nanowires formed by the packing of structures with 5-fold symmetry. These icosahedral nanowire structures are similar to those of quasicrystals, which can only be formed if at least two atomic species are present and in which icosahedral and decahedral packing has been found for bulk crystals.

| S-EPMC3180901 | biostudies-literature

Temperature Evolution of Quasi-one-dimensional C60 Nanostructures on Rippled Graphene.

Project description:We report the preparation of novel quasi-one-dimensional (quasi-1D) C60 nanostructures on rippled graphene. Through careful control of the subtle balance between the linear periodic potential of rippled graphene and the C60 surface mobility, we demonstrate that C60 molecules can be arranged into a quasi-1D C60 chain structure with widths of two to three molecules. At a higher annealing temperature, the quasi-1D chain structure transitions to a more compact hexagonal close packed quasi-1D stripe structure. This first experimental realization of quasi-1D C60 structures on graphene may pave a way for fabricating new C60/graphene hybrid structures for future applications in electronics, spintronics and quantum information.

| S-EPMC4585716 | biostudies-literature

Electrospun one-dimensional nanostructures: a new horizon for gas sensing materials.

Project description:Electrospun one-dimensional (1D) nanostructures are rapidly emerging as key enabling components in gas sensing due to their unique electrical, optical, magnetic, thermal, mechanical and chemical properties. 1D nanostructures have found applications in numerous areas, including healthcare, energy storage, biotechnology, environmental monitoring, and defence/security. Their enhanced specific surface area, superior mechanical properties, nanoporosity and improved surface characteristics (in particular, uniformity and stability) have made them important active materials for gas sensing applications. Such highly sensitive and selective elements can be embedded in sensor nodes for internet-of-things applications or in mobile systems for continuous monitoring of air pollutants and greenhouse gases as well as for monitoring the well-being and health in everyday life. Herein, we review recent developments of gas sensors based on electrospun 1D nanostructures in different sensing platforms, including optical, conductometric and acoustic resonators. After explaining the principle of electrospinning, we classify sensors based on the type of materials used as an active sensing layer, including polymers, metal oxide semiconductors, graphene, and their composites or their functionalized forms. The material properties of these electrospun fibers and their sensing performance toward different analytes are explained in detail and correlated to the benefits and limitations for every approach.

| S-EPMC6122236 | biostudies-literature

One-Dimensional CoMoP Nanostructures as Bifunctional Electrodes for Overall Water Splitting.

Project description:As high-quality substitutes for conventional catalysts, the bifunctional catalytic properties of the coating of transition-metal-based materials are pivotal for improving water-splitting efficiency. Herein, cobalt-molybdenum bimetallic phosphide nanofibers (CoMoP NFs) were synthesized via a series of facile strategies, which are divided into pyrolysis electrospun PAN and metal salts, to obtain one-dimensional morphology and a gas-solid phosphating precursor. The obtained CoMoP NFs catalyst has superior catalytic activity performance in 1M KOH. Serving as an oxygen evolution reaction (OER) catalyst, the electrode of the CoMoP NFs affords different kinds of current densities at 50 mA cm-2 and 100 mA cm-2, with low overpotentials of 362 and 391 mV, respectively. In addition, the hydrogen evolution reaction (HER) performance of the CoMoP NFs mainly shows when under a low overpotential of 126 mV, which can deliver a current density of 10 mA cm-2. In order to further detect the stability of the catalyst, we used multiple cyclic voltammetry and chronopotentiometry tests for OERs and HERs, which maintain performance and carry a current density of 10 mA cm-2 for longer. As an integrated high-performance bifunctional electrode for overall water splitting, the CoMoP NFs only require 1.75 V@10 mA cm-2 for 40 h. This work highlights a facile method to create an electrocatalyst with fiber nanostructures which possesses excellent activity as an alkaline electrolyte.

| S-EPMC9658805 | biostudies-literature

Two-dimensional characterization of three-dimensional magnetic bubbles in Fe<sub>3</sub>Sn<sub>2</sub> nanostructures.

Project description:We report differential phase contrast scanning transmission electron microscopy (TEM) of nanoscale magnetic objects in Kagome ferromagnet Fe3Sn2 nanostructures. This technique can directly detect the deflection angle of a focused electron beam, thus allowing clear identification of the real magnetic structures of two magnetic objects including three-ring and complex arch-shaped vortices in Fe3Sn2 by Lorentz-TEM imaging. Numerical calculations based on real material-specific parameters well reproduced the experimental results, showing that the magnetic objects can be attributed to integral magnetizations of two types of complex three-dimensional (3D) magnetic bubbles with depth-modulated spin twisting. Magnetic configurations obtained using the high-resolution TEM are generally considered as two-dimensional (2D) magnetic objects previously. Our results imply the importance of the integral magnetizations of underestimated 3D magnetic structures in 2D TEM magnetic characterizations.

| S-EPMC8288175 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data