Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

All-aqueous multiphase microfluidics.

ABSTRACT: Immiscible aqueous phases, formed by dissolving incompatible solutes in water, have been used in green chemical synthesis, molecular extraction and mimicking of cellular cytoplasm. Recently, a microfluidic approach has been introduced to generate all-aqueous emulsions and jets based on these immiscible aqueous phases; due to their biocompatibility, these all-aqueous structures have shown great promises as templates for fabricating biomaterials. The physico-chemical nature of interfaces between two immiscible aqueous phases leads to unique interfacial properties, such as an ultra-low interfacial tension. Strategies to manipulate components and direct their assembly at these interfaces needs to be explored. In this paper, we review progress on the topic over the past few years, with a focus on the fabrication and stabilization of all-aqueous structures in a multiphase microfluidic platform. We also discuss future efforts needed from the perspectives of fluidic physics, materials engineering, and biology for fulfilling potential applications ranging from materials fabrication to biomedical engineering.

SUBMITTER: Song Y

PROVIDER: S-EPMC3888457 | biostudies-other | 2013 Dec

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Wettability control on multiphase flow in patterned microfluidics.

Project description:Multiphase flow in porous media is important in many natural and industrial processes, including geologic CO2 sequestration, enhanced oil recovery, and water infiltration into soil. Although it is well known that the wetting properties of porous media can vary drastically depending on the type of media and pore fluids, the effect of wettability on multiphase flow continues to challenge our microscopic and macroscopic descriptions. Here, we study the impact of wettability on viscously unfavorable fluid-fluid displacement in disordered media by means of high-resolution imaging in microfluidic flow cells patterned with vertical posts. By systematically varying the wettability of the flow cell over a wide range of contact angles, we find that increasing the substrate's affinity to the invading fluid results in more efficient displacement of the defending fluid up to a critical wetting transition, beyond which the trend is reversed. We identify the pore-scale mechanisms-cooperative pore filling (increasing displacement efficiency) and corner flow (decreasing displacement efficiency)-responsible for this macroscale behavior, and show that they rely on the inherent 3D nature of interfacial flows, even in quasi-2D media. Our results demonstrate the powerful control of wettability on multiphase flow in porous media, and show that the markedly different invasion protocols that emerge-from pore filling to postbridging-are determined by physical mechanisms that are missing from current pore-scale and continuum-scale descriptions.

| S-EPMC5027428 | biostudies-literature

Nanoscale Terahertz Monitoring on Multiphase Dynamic Assembly of Nanoparticles under Aqueous Environment.

Project description:Probing the kinetic evolution of nanoparticle (NP) growth in liquids is essential for understanding complex nano-phases and their corresponding functions. Terahertz (THz) sensing, an emerging technology for next-generation laser photonics, has been developed with unique photonic features, including label-free, non-destructive, and molecular-specific spectral characteristics. Recently, metasurface-based sensing platforms have helped trace biomolecules by overcoming low THz absorption cross-sectional limits. However, the direct probing of THz signals in aqueous environments remains difficult. Here, the authors report that vertically aligned nanogap-hybridized metasurfaces can efficiently trap traveling NPs in the sensing region, thus enabling us to monitor the real-time kinetic evolution of NP assemblies in liquids. The THz photonics approach, together with an electric tweezing technique via spatially matching optical hotspots to particle trapping sites with a nanoscale spatial resolution, is highly promising for underwater THz analysis, forging a route toward unraveling the physicochemical events of nature within an ultra-broadband wavelength regime.

| S-EPMC8188200 | biostudies-literature

Aqueous multiphase systems of polymers and surfactants provide self-assembling step-gradients in density.

Project description:This Communication demonstrates the generation of over 300 phase-separated systems-ranging from two to six phases-from mixtures of aqueous solutions of polymers and surfactants. These aqueous multiphase systems (MuPSs) form self-assembling, thermodynamically stable step-gradients in density using a common solvent, water. The steps in density between phases of a MuPS can be very small (?? ? 0.001 g/cm(3)), do not change over time, and can be tuned by the addition of co-solutes. We use two sets of similar objects, glass beads and pellets of different formulations of Nylon, to demonstrate the ability of MuPSs to separate mixtures of objects by differences in density. The stable interfaces between phases facilitate the convenient collection of species after separation. These results suggest that the stable, sharp step-gradients in density provided by MuPSs can enable new classes of fractionations and separations based on density.

| S-EPMC3881359 | biostudies-literature

Control and measurement of the phase behavior of aqueous solutions using microfluidics.

Project description:A microfluidic device denoted the Phase Chip has been designed to measure and manipulate the phase diagram of multicomponent fluid mixtures. The Phase Chip exploits the permeation of water through poly(dimethylsiloxane) (PDMS) in order to controllably vary the concentration of solutes in aqueous nanoliter volume microdrops stored in wells. The permeation of water in the Phase Chip is modeled using the diffusion equation, and good agreement between experiment and theory is obtained. The Phase Chip operates by first creating drops of the water/solute mixture whose composition varies sequentially. Next, drops are transported down channels and guided into storage wells using surface tension forces. Finally, the solute concentration of each stored drop is simultaneously varied and measured. Two applications of the Phase Chip are presented. First, the phase diagram of a polymer/salt mixture is measured on-chip and validated off-chip, and second, protein crystallization rates are enhanced through the manipulation of the kinetics of nucleation and growth.

| S-EPMC2531156 | biostudies-literature

High-Throughput Aqueous Two-Phase System Droplet Generation by Oil-Free Passive Microfluidics.

Project description:Aqueous two-phase system (ATPS) droplet generation has significant potential in biological and medical applications because of its excellent biocompatibility. However, the ultralow interfacial tension of ATPS makes droplet generation extremely challenging when compared with the conventional water-in-oil (W/O) system. In this paper, we passively produced ATPS droplets with a wide range of droplet size and high production rate without the involvement of an oil phase and external forces. For the first time, we reported important information of the flow rate and capillary (Ca) number for passive, oil-free ATPS droplet generation. It was found that the range of Ca numbers of the continuous phase under the jetting flow regime is 0.3-1.7, as compared to less than 0.1 in the W/O system, indicating the ultralow interfacial tension in ATPS. In addition, we successfully generated ATPS droplets with a radius as small as 7 μm at the maximum frequency up to 300 Hz, which has not been achieved in previous studies. The size and generation frequency of ATPS droplets can be controlled independently by adjusting the inlet pressures and corresponding flow rates. We found that the droplet size is correlated with the pressure and flow rate ratios with the power-law exponents of 0.8 and 0.2, respectively.

| S-EPMC6645416 | biostudies-literature

Dynamic Aqueous Multiphase Reaction System for One-Pot CRISPR-Cas12a-Based Ultrasensitive and Quantitative Molecular Diagnosis.

Project description:Recently, CRISPR-Cas technology has opened a new era of nucleic acid-based molecular diagnostics. However, current CRISPR-Cas-based nucleic acid biosensing has a lack of the quantitative detection ability and typically requires separate manual operations. Herein, we reported a dynamic aqueous multiphase reaction (DAMR) system for simple, sensitive and quantitative one-pot CRISPR-Cas12a based molecular diagnosis by taking advantage of density difference of sucrose concentration. In the DAMR system, recombinase polymerase amplification (RPA) and CRISPR-Cas12a derived fluorescent detection occurred in spatially separated but connected aqueous phases. Our DAMR system was utilized to quantitatively detect human papillomavirus (HPV) 16 and 18 DNAs with sensitivities of 10 and 100 copies within less than 1 h. Multiplex detection of HPV16/18 in clinical human swab samples were successfully achieved in the DAMR system using 3D-printed microfluidic device. Furthermore, we demonstrated that target DNA in real human plasma samples can be directly amplified and detected in the DAMR system without complicated sample pretreatment. As demonstrated, the DAMR system has shown great potential for development of next-generation point-of-care molecular diagnostics.

| S-EPMC7588651 | biostudies-literature

A Triple Salting-Out Effect is Required for the Formation of Ionic-Liquid-Based Aqueous Multiphase Systems.

Project description:Novel aqueous multiphase systems (MuPSs) formed by quaternary mixtures composed of cholinium-based ionic liquids (ILs), polymers, inorganic salts, and water are reported herein. The influence of several ILs, polymers, and salts was studied, demonstrating that a triple salting-out is a required phenomenon to prepare MuPSs. The respective phase diagrams and "tie-surfaces" were determined, followed by the evaluation of the effect of temperature. Finally, the remarkable ability of IL-based MuPSs to selectively separate mixtures of textile dyes is shown.

| S-EPMC6157712 | biostudies-literature

Monitoring phase transition of aqueous biomass model substrates by high-pressure and high-temperature microfluidics.

Project description:Aqueous-Phase Reforming (APR) is a promising hydrogen production method, where biomass is catalytically reformed under high pressure and high temperature reaction conditions. To eventually study APR, in this paper, we report a high-pressure and high-temperature microfluidic platform that can withstand temperatures up to 200°C and pressures up to 30 bar. As a first step, we studied the phase transition of four typical APR biomass model solutions, consisting of 10 wt% of ethylene glycol, glycerol, xylose or xylitol in MilliQ water. After calibration of the set-up using pure MilliQ water, a small increase in boiling point was observed for the ethylene glycol, xylitol and xylose solutions compared to pure water. Phase transition occurred through either explosive or nucleate boiling mechanisms, which was monitored in real-time in our microfluidic device. In case of nucleate boiling, the nucleation site could be controlled by exploiting the pressure drop along the microfluidic channel. Depending on the void fraction, various multiphase flow patterns were observed simultaneously. Altogether, this study will not only help to distinguish between bubbles resulting from a phase transition and/or APR product formation, but is also important from a heat and mass transport perspective.

| S-EPMC6590653 | biostudies-literature

Ultrasensitive one-pot detection of monkeypox virus with RPA and CRISPR in a sucrose-aided multiphase aqueous system.

Project description:ImportanceThe monkeypox virus was declared as a Public Health Emergency of International Concern (PHEIC) by the World Health Organization (WHO) and continues to cause infection cases worldwide. Given the risk of virus evolution, it is essential to identify monkeypox virus infection in a timely manner to prevent outbreaks. This study establishes a novel one-pot recombinase polymerase amplification-Clustered Regularly Interspaced Short Palindromic Repeats (RPA-CRISPR) assay for monkeypox virus with an ultra-high sensitivity. The assay shows good specificity, accuracy, and the rapidness and convenience important for point-of-care testing. It provides an effective tool for the early diagnosis of monkeypox, which is useful for the prevention of an epidemic.

| S-EPMC10782985 | biostudies-literature