Pencil drawn strain gauges and chemiresistors on paper.
Ontology highlight
ABSTRACT:
SUBMITTER: Lin CW
PROVIDER: S-EPMC3898045 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:We report on the development of a simple and cost-effective potentiometric sensor array that is based on manual "drawing" on the polymeric support with the pencils composed of graphite and different types of zeolites. The sensor array demonstrates distinct sensitivity towards a variety of inorganic ions in aqueous media. This multisensor system has been successfully applied to quantitative analysis of 100 real-life surface waters sampled in Mahananda and Hooghly rivers in the West Bengal state (India). Partial least squares regression has been utilized to relate responses of the sensors to the values of different water quality parameters. It has been found that the developed sensor array, or electronic tongue, is capable of quantifying total hardness, total alkalinity, and calcium content in the samples, with the mean relative errors below 18%.
| S-EPMC8272086 | biostudies-literature
Project description:Pencils and papers are ubiquitous in our society and have been widely used for writing and drawing, because they are easy to use, low-cost, widely accessible, and disposable. However, their applications in emerging skin-interfaced health monitoring and interventions are still not well explored. Herein, we report a variety of pencil-paper-based on-skin electronic devices, including biophysical (temperature, biopotential) sensors, sweat biochemical (pH, uric acid, glucose) sensors, thermal stimulators, and humidity energy harvesters. Among these devices, pencil-drawn graphite patterns (or combined with other compounds) serve as conductive traces and sensing electrodes, and office-copy papers work as flexible supporting substrates. The enabled devices can perform real-time, continuous, and high-fidelity monitoring of a range of vital biophysical and biochemical signals from human bodies, including skin temperatures, electrocardiograms, electromyograms, alpha, beta, and theta rhythms, instantaneous heart rates, respiratory rates, and sweat pH, uric acid, and glucose, as well as deliver programmed thermal stimulations. Notably, the qualities of recorded signals are comparable to those measured with conventional methods. Moreover, humidity energy harvesters are prepared by creating a gradient distribution of oxygen-containing groups on office-copy papers between pencil-drawn electrodes. One single-unit device (0.87 cm2) can generate a sustained voltage of up to 480 mV for over 2 h from ambient humidity. Furthermore, a self-powered on-skin iontophoretic transdermal drug-delivery system is developed as an on-skin chemical intervention example. In addition, pencil-paper-based antennas, two-dimensional (2D) and three-dimensional (3D) circuits with light-emitting diodes (LEDs) and batteries, reconfigurable assembly and biodegradable electronics (based on water-soluble papers) are explored.
| S-EPMC7414167 | biostudies-literature
Project description:The biocidal properties of gecko skin and cicada wings have inspired the synthesis of synthetic surfaces decorated with high aspect ratio nanostructures that inactivate microorganisms. Here, we investigate the bactericidal activity of oriented zinc phthalocyanine (ZnPc) nanopillars grown using a simple pencil-drawn graphite templating technique. By varying the evaporation time, nanopillars initiated from graphite that was scribbled using a pencil onto silicon substrates were optimized to yield a high inactivation of the Gram-negative bacteria, Escherichia coli. We next adapted the procedure so that analogous nanopillars could be grown from pencil-drawn graphite scribbled onto stainless steel, flexible polyimide foil, and glass substrates. Time-dependent bacterial cytotoxicity studies indicate that the oriented nanopillars grown on all four substrates inactivated up to 97% of the E. coli quickly, in 15 min or less. These results suggest that organic nanostructures, which can be easily grown on a broad range of substrates hold potential as a new class of biocidal surfaces that kill microbes quickly and potentially, without spreading antibiotic-resistance genes.
| S-EPMC6072760 | biostudies-literature
Project description:Simple procedures to estimate Hansen solubility parameter (HSP) components from structural formulas are investigated. The best results are obtained using a simple relationship with molar volume and refractivity for the dispersion component, and using additivity models based on tailored fragments specifically designed for the polar and hydrogen bonding components. Despite large errors for some classes of chemicals, including small inorganic molecules, ionic liquids, and high halogen compounds, these models yield average absolute deviations from reference on par with state-of-the-art models and lower than reported using molecular dynamics simulations or nonlinear quantitative structure-property relationship models based on a limited set of quantum chemical descriptors. In contrast to group contribution methods that are either more restricted in scope or heavily parameterized, they are thoroughly validated and very easy to apply. Furthermore, the errors observed are easy to rationalize and may usually be anticipated. This work sheds light on some limitations inherent to pure additivity approaches for HSP prediction and provides a first step toward better models. A Python script implementing the procedure and the fully detailed results are provided as the Supporting Information.
| S-EPMC6643659 | biostudies-literature
Project description:Computer-aided behavior observation is gradually supplanting paper-and-pencil approaches to behavior observation, but there is a dearth of evidence on the relative accuracy of paper-and-pencil versus computer-aided behavior observation formats in the literature. The current study evaluated the accuracy resulting from paper-and-pencil observation and from two computer-aided behavior observation methods: The Observer XT® desktop software and the Big Eye Observer® smartphone application. Twelve postgraduate students without behavior observation experience underwent a behavior observation training protocol. As part of a multi-element design, participants recorded 60 real clinical sessions randomly assigned to one of the three observation methods. All three methods produced high levels of accuracy (paper-and-pencil, .88 ± .01; The Observer XT, .84 ± .01; Big Eye Observer, .84 ± .01). A mixed linear model analysis indicated that paper-and-pencil observation produced marginally superior accuracy values, whereas the accuracy produced by The Observer XT and Big Eye Observer did not differ. The analysis suggests that accuracy of recording was mediated by the number of recordable events in the observation videos. The implications of these findings for research and practice are discussed.
| S-EPMC10027644 | biostudies-literature
Project description:Multifunctionality is important to the development of next-generation actuators and intelligent robots. However, current multi-functional actuating systems are achieved based on the integration of diverse functional units with complex design, especially lacking in multi-mode sensing and displaying functions. Herein, a light-driven actuator integrated with self-powered/visual dual-mode sensing functions and rewritable display function is proposed. The actuator demonstrates a bending curvature of 0.93 cm-1 under near-infrared light irradiation. Meanwhile, by embedding a pencil-drawn graphite generator and thermochromic materials, the actuator also provides two independent sensing functions. First, owing to the photo-thermoelectric effect of graphite, the actuator spontaneously outputs a self-powered voltage (Seebeck coefficient: 23 µV K-1 ), which can reflect the deformation trend of actuator. Second, color changes occur on the actuator during deformation, which provide a visual sensing due to the thermochromic property. Furthermore, the actuator can be utilized as a rewritable display, owing to the integrated color-memorizing component. Intelligent robots, switches, and smart homes are further demonstrated as applications. All of them can spontaneously provide self-powered and visual sensing signals to demonstrate the working states of actuating systems, accompanied by rewritable displays on the actuators. This study will open a new direction for self-powered devices, multi-functional actuators, and intelligent robots.
| S-EPMC9982543 | biostudies-literature
Project description:Halide double perovskites are an important emerging alternative to lead-halide perovskites in a variety of optoelectronic applications. Compared to ABX3 single perovskites (A = monovalent cation, X = halide), A2BB'X6 double perovskites exhibit a wider array of compositions and electronic structures, promising finer control over physical and electronic properties through synthetic design. However, a clear understanding of how chemical composition dictates the electronic structures of this large family of materials is still lacking. Herein, we develop a qualitative Linear Combination of Atomic Orbitals (LCAO) model that describes the full range of band structures for double perovskites. Our simple model allows for a direct connection between the inherently local bonding between atoms in the double perovskite and the resulting delocalized bands of the solid. In particular, we show how bands in halide double perovskites originate from the molecular orbitals of metal-hexahalide coordination complexes and describe how these molecular orbitals vary within a band. Our results provide both an enhanced understanding of known perovskite compositions and predictive power for identifying new compositions with targeted properties. We present a table, which permits the position of the conduction band minimum and valence band maximum in most double perovskites to be immediately determined from the frontier atomic orbitals of the B-site metals. Using purely qualitative arguments based on orbital symmetries and their relative energies, the direct/indirect nature of the bandgap of almost all halide double perovskites can thus be correctly predicted. We hope that this theory provides an intuitive understanding of halide double perovskite band structures and enables lessons from molecular chemistry to be applied to these extended solids.
| S-EPMC7066864 | biostudies-literature
Project description:We present the fabrication of an ultra-low cost, disposable, solvent-free air cathode all-paper microbial fuel cell (MFC) that does not utilize any chemical treatments. The anode and cathode were fabricated by depositing graphite particles by drawing them on paper with a pencil (four strokes). Hydrophobic parchment paper was used as a proton exchange membrane (PEM) to allow only H(+) to pass. Air cathode MFC technology, where O2 was used as an electron acceptor, was implemented on the paper platform. The bioelectric current was generated by an electrochemical process involving the redox couple of microbial-activated extracellular electron transferred electrons, PEM-passed H(+), and O2 in the cathode. A fully micro-integrated pencil-traced MFC showed a fast start-time, producing current within 10 s after injection of bacterial cells. A single miniaturized all-paper air cathode MFC generated a maximum potential of 300 mV and a maximum current of 11 μA during 100 min after a single injection of Shewanella oneidensis. The micro-fabricated solvent-free air cathode all-paper MFC generated a power of 2,270 nW (5.68 mW/m(2)). The proposed solvent-free air cathode paper-based MFC device could be used for environmentally-friendly energy storage as well as in single-use medical power supplies that use organic matter.
| S-EPMC4917852 | biostudies-literature
Project description:BACKGROUND:As eye tracking-based assessment of cognition becomes more widely used in older adults, particularly those at risk for dementia, reliable and scalable methods to collect high-quality data are required. Eye tracking-based cognitive tests that utilize device-embedded cameras have the potential to reach large numbers of people as a screening tool for preclinical cognitive decline. However, to fully validate this approach, more empirical evidence about the comparability of eyetracking-based paradigms to existing cognitive batteries is needed. OBJECTIVE:Using a population of clinically normal older adults, we examined the relationship between a 30-minute Visual Paired Comparison (VPC) recognition memory task and cognitive composite indices sensitive to a subtle decline in domains associated with Alzheimer disease. Additionally, the scoring accuracy between software used with a commercial grade eye tracking camera at 60 frames per second (FPS) and a manually scored procedure used with a laptop-embedded web camera (3 FPS) on the VPC task was compared, as well as the relationship between VPC task performance and domain-specific cognitive function. METHODS:A group of 49 clinically normal older adults completed a 30-min VPC recognition memory task with simultaneous recording of eye movements by a commercial-grade eye-tracking camera and a laptop-embedded camera. Relationships between webcam VPC performance and the Preclinical Alzheimer Cognitive Composite (PACC) and National Institutes of Health Toolbox Cognitive Battery (NIHTB-CB) were examined. Inter-rater reliability for manually scored tests was analyzed using Krippendorff's kappa formula, and we used Spearman's Rho correlations to investigate the relationship between VPC performance scores with both cameras. We also examined the relationship between VPC performance with the device-embedded camera and domain-specific cognitive performance. RESULTS:Modest relationships were seen between mean VPC novelty preference and the PACC (r=.39, P=.007) and NIHTB-CB (r=.35, P=.03) composite scores, and additional individual neurocognitive task scores including letter fluency (r=.33, P=.02), category fluency (r=.36, P=.01), and Trail Making Test A (-.40, P=.006). Robust relationships were observed between the 60 FPS eye tracker and 3 FPS webcam on both trial-level VPC novelty preference (r=.82, P<.001) and overall mean VPC novelty preference (r=.92 P<.001). Inter-rater agreement of manually scored web camera data was high (kappa=.84). CONCLUSIONS:In a sample of clinically normal older adults, performance on a 30-minute VPC task correlated modestly with computerized and paper-pencil based cognitive composites that serve as preclinical Alzheimer disease cognitive indices. The strength of these relationships did not differ between camera devices. We suggest that using a device-embedded camera is a reliable and valid way to assess performance on VPC tasks accurately and that these tasks correlate with existing cognitive composites.
| S-EPMC6081607 | biostudies-literature
Project description:The Personality Inventory for DSM-5 - Self Reported Form (PID-5-SRF) operationalizes Criterion B of the personality alternative model of DSM-5 Section III and has already been cross-culturally adapted to many countries. The objective is to present evidence of validity and reliability of the Brazilian version of PID-5 (pencil-and-paper) in a Brazilian community sample. The sample was composed of 730 individuals from the general population [67.8% women, aged 33.84 (SD = ±15.2), 69.5% ≥ 12 years of schooling]. The participants were recruited in academic, organizational, healthcare, and business facilities in three Brazilian states. The snowball method was used. The PID-5 Brazilian version and the Revised NEO-Five Factor Inventory (NEO-FFI-R) were individually applied, and the retest was applied 30 days after. Satisfactory internal consistency (facets α ≥0.51; domains α ≥0.82) and test-retest reliability (facets ICC ≥ 0.45; domains ICC ≥0.76) were found, but a floor effect was verified in 97.7% of the items. Regarding convergent validity, strong correlations were found between the PID-5 and the NEO-FFI-R domains (r = -0.44 to 0.70). Ten facets did not fit the unidemensional structure. Confirmatory Factor Analyses did not present adequate goodness of fit, and Exploratory Analyses indicated that a five-factor model is more appropriate, though it presents some peculiarities concerning the original model. PID-5 also presented satisfactory goodness of fit to the personality hierarchical model. Generally, the instrument's psychometric indicators favor its use in the Brazilian context. However, some aspects demand attention, and more specific studies should be conducted to verify the impact of reverse-scored items, floor effect, and peculiarities of its internal structure (some facets' multidimensionality and interstitiality) concerning the original model.
| S-EPMC9513057 | biostudies-literature