Improving rutting resistance of pavement structures using geosynthetics: an overview.
Ontology highlight
ABSTRACT:
SUBMITTER: Mirzapour Mounes S
PROVIDER: S-EPMC3910378 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Uncovering energy absorption and surface effects of various penetrating velocities on laminar structures is essential for designing protective structures. In this study, both quasi-static and dynamic penetration tests were systematical conducted on the front surfaces of metal sheets coated with a graphene oxide (GO) solution and other media. The addition of a GO fluid film to the front impact surface aided in increasing the penetration strength, improving the failure extension and dissipating additional energy under a wide-range of indentation velocity, from 3.33?×?10-5?m/s to 4.42?m/s. The coated -surfaces improved the specific energy dissipation by approximately 15~40% relative to the dry-contact configuration for both single-layer and double-layer configurations, and specific energy dissipations of double-layer configurations were 20~30% higher than those of the single-layer configurations. This treatment provides a facile strategy in changing the contact state for improving the failure load and dissipate additional energy.
| S-EPMC5529432 | biostudies-literature
Project description:Groups can make precise collective estimations in cases like the weight of an object or the number of items in a volume. However, in others tasks, for example those requiring memory or mental calculation, subjects often give estimations with large deviations from factual values. Allowing members of the group to communicate their estimations has the additional perverse effect of shifting individual estimations even closer to the biased collective estimation. Here we show that this negative effect of social interactions can be turned into a method to improve collective estimations. We first obtained a statistical model of how humans change their estimation when receiving the estimates made by other individuals. We confirmed using existing experimental data its prediction that individuals use the weighted geometric mean of private and social estimations. We then used this result and the fact that each individual uses a different value of the social weight to devise a method that extracts the subgroups resisting social influence. We found that these subgroups of individuals resisting social influence can make very large improvements in group estimations. This is in contrast to methods using the confidence that each individual declares, for which we find no improvement in group estimations. Also, our proposed method does not need to use historical data to weight individuals by performance. These results show the benefits of using the individual characteristics of the members in a group to better extract collective wisdom.
| S-EPMC4643903 | biostudies-literature
Project description:Coarse aggregate is the main component of asphalt mixtures, and differences in its morphology directly impact road performance. The utilization of standard aggregates can benefit the standard design and performance improvement. In this study, 3D printing technology was adopted to prepare artificial aggregates with specific shapes for the purpose of making the properties of artificial aggregates to be similar to the properties of natural aggregates. Through a series of material experiments, the optimal cement-based material ratio for the preparation of high-strength artificial aggregates and corresponding manufacturing procedures have been determined. The performance of the artificial aggregates has been verified by comparing the physical and mechanical properties with those of natural aggregates. Results indicate that using 3D printing technology to generate the standard coarse aggregate is feasible, but its high cost in implementation cannot be ignored. The 3D shape of the artificial aggregate prepared by the grouting molding process has a good consistency with the natural aggregate, and the relative deviation of the overall macro-scale volume index of the artificial aggregate is within 4%. The average Los Angeles abrasion loss of artificial cement-based aggregate is 15.2%, which is higher than that of diabase aggregate, but significantly lower than that of granite aggregate and limestone aggregate. In a nutshell, 3D printed aggregates prepared using the optimized cement-based material ratio and corresponding manufacturing procedures have superior physical and mechanical performance, which provides technical support for the test standardization and engineering application of asphalt pavements.
| S-EPMC8878064 | biostudies-literature
Project description:Here, we show that modern solution nuclear magnetic resonance (NMR) structures of RNA exhibit more steric clashes and conformational ambiguities than their crystallographic X-ray counterparts. To tackle these issues, we developed RNA-ff1, a new force field for structure calculation with Xplor-NIH. Using seven published NMR datasets, RNA-ff1 improves covalent geometry and MolProbity validation criteria for clashes and backbone conformation in most cases, relative to both the previous Xplor-NIH force field and the original structures associated with the experimental data. In addition, with smaller base-pair step rises in helical stems, RNA-ff1 structures enjoy more favorable base stacking. Finally, structural accuracy improves in the majority of cases, as supported by complete residual dipolar coupling cross-validation. Thus, the reported advances show great promise in bridging the quality gap that separates NMR and X-ray structures of RNA.
| S-EPMC4856558 | biostudies-literature
Project description:Gangliosides are sialic acid-containing glycosphingolipids that are most abundant in the nervous system. Heterogeneity and diversity of the structures in their carbohydrate chains are characteristic hallmarks of these lipids; so far, 188 gangliosides with different carbohydrate structures have been identified in vertebrates. The molecular structural complexity increases manifold if one considers heterogeneity in the lipophilic components. The expression levels and patterns of brain gangliosides are known to change drastically during development. In cells, gangliosides are primarily, but not exclusively, localized in the outer leaflets of plasma membranes and are integral components of cell surface microdomains with sphingomyelin and cholesterol from which they participate in cell-cell recognition, adhesion, and signal transduction. In this brief review, we discuss the structures, metabolism and functions of gangliosides.
| S-EPMC3684167 | biostudies-literature
Project description:Bio-asphalt binders have been proposed as replacements for traditional asphalt binders, owing to advantages such as environmental protection, low costs, and abundant resources. However, a limitation of bio-asphalt binders is that their high-temperature performance is not suitable for pavement construction. In recent years, nano-particles have been widely used to improve the pavement performance of asphalt binders, particularly the high-temperature performance. Thus, the nano-particles might also provide a positive modified effect on the high-temperature performance of bio-asphalt binders. Based on this, five types of nano-particles including SiO2, CaCO3, TiO2, Fe2O3, and ZnO are selected for the preparation of modified bio-asphalt binders, using different dosages of nano-particles and bio-oil. The high- and low-temperature performances, aging resistance, workable performance, and water stability of the nano-modified bio-asphalt binders and mixtures are investigated. The results reveal that, the high-temperature performance and aging resistance of the nano-modified bio-asphalt binders and mixtures are improved at increased nano-particle dosages, whereas their low-temperature performance is slightly weakened. The effects of the nano-particles on the workable performance and water stability are insignificant.
| S-EPMC7473544 | biostudies-literature
Project description:Asphalt is the most commonly used material for pavement construction around the world, and therefore, it is vital to acquaint a practice that restores the reclaimed asphalt pavement (RAP) binder properties to the required level of performance by adding proper rejuvenators. However, a rejuvenator may perform better in the early stages of its application but may not necessarily perform better in the long run. The aim of this study is to assess the rejuvenation effect on the aging resistance of RAP binder in long-life performance through applying artificial aging. In this study, base virgin binder of pen grade 60/70 and RAP binder rejuvenated with Cereclor were subjected to artificial aging to simulate the short- and long-term aging effects. Penetration, softening point, ductility, and viscosity; saturates, aromatics, resins, and asphaltene (SARA) fractionation; and Fourier-transform infrared (FTIR) spectroscopy, bending beam rheometer (BBR), and dynamic shear rheometer (DSR) tests were conducted to evaluate the potential improvements in various properties of RAP binder. The results indicated that the physical, fractional composition, rheological, and aging resistance of RAP binder improved through the rejuvenation mechanism. Therefore, the rejuvenator improved the chemical structure through re-balancing the constituents in the colloidal system, even after long-term re-aging, which proves it to be an aging-resistant binder. Furthermore, it has been concluded that Cereclor has substantial rejuvenation potential even after applying artificial aging, and it can be utilized in pavement recycling to achieve long-life performance. Furthermore, the results depict good correlations between the physical, rheological, and chemical parameters of virgin and RAP binder.
| S-EPMC7177406 | biostudies-literature
Project description:Cardiovascular disease (CVD) is the leading cause of death worldwide. To this end, human cardiac organoids (hCOs) have been developed for improved organotypic CVD modeling over conventional in vivo animal models. Utilizing human cells, hCOs hold great promise to bridge key gaps in CVD research pertaining to human-specific conditions. hCOs are multicellular 3D models which resemble heart structure and function. Varying hCOs fabrication techniques leads to functional and phenotypic differences. To investigate heterogeneity across hCO platforms, we performed a transcriptomic analysis utilizing bulk RNA-sequencing from four previously published unique hCO studies. We further compared selected hCOs to 2D and 3D hiPSC-derived cardiomyocytes (hiPSC-CMs), as well as fetal and adult human myocardium bulk RNA-sequencing samples. Upon investigation utilizing Principal Component Analysis (PCA), K-means clustering analysis of key genes, and further downstream analyses such as Gene Set Enrichment (GSEA), Gene Set Variation (GSVA), and GO term enrichment, we found that hCO fabrication method influences maturity and cellular heterogeneity across models. Thus, we propose that adjustment of fabrication method will result in an hCO with a defined maturity and transcriptomic profile to facilitate its specified applications, in turn maximizing its modeling potential.
2024-06-01 | GSE262739 | GEO
Project description:On the basis of a structural analysis of 240 protein-DNA complexes contained in the Protein Data Bank (PDB), we have classified the DNA-binding proteins involved into eight different structural/functional groups, which are further classified into 54 structural families. Here we present this classification and review the functions, structures and binding interactions of these protein-DNA complexes.
| S-EPMC138832 | biostudies-literature
Project description:In this review an overview is given on antibiotic resistance (AR) mechanisms with special attentions to the AR genes described so far preceded by a short introduction on the discovery and mode of action of the different classes of antibiotics. As this review is only dealing with acquired resistance, attention is also paid to mobile genetic elements such as plasmids, transposons, and integrons, which are associated with AR genes, and involved in the dispersal of antimicrobial determinants between different bacteria.
| S-EPMC3202223 | biostudies-literature