Induced effects of advanced oxidation processes.
Ontology highlight
ABSTRACT:
SUBMITTER: Liu P
PROVIDER: S-EPMC3916790 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Photocatalytic materials, such as WO3, TiO2, and ZnO nanoparticles, are commonly linked onto porous polymer membranes for wastewater treatment, fouling mitigation and permeation enhancement. Buckypapers (BPs) are entanglements of carbon nanotubes, which have been recently proposed as innovative filtration systems thanks to their mechanical, electronic, and thermal properties. In this work, flexible membranes of single wall carbon nanotubes are prepared and characterized as efficient substrates to deposit by chemical vapor deposition thin layers of WO3 and obtain, in such a way, WO3/BP composite membranes for application in advanced oxidation processes. The photocatalytic efficiency of WO3/BP composite membranes is tested against model pollutants in a small continuous flow reactor and compared with the performance of an equivalent homogeneous WO3-based reactor.
| S-EPMC7407767 | biostudies-literature
Project description:In this work, the degradation of hydroxychloroquine (HCQ) drug in aqueous solution by electrochemical advanced oxidation processes including electrochemical oxidation (EO) using boron doped diamond (BDD) and its combination with UV irradiation (photo-assisted electrochemical oxidation, PEO) and sonication (sono-assisted electrochemical oxidation, SEO) was investigated. EO using BDD anode achieved the complete depletion of HCQ from aqueous solutions in regardless of HCQ concentration, current density, and initial pH value. The decay of HCQ was more rapid than total organic carbon (TOC) indicating that the degradation of HCQ by EO using BDD anode involves successive steps leading to the formation of organic intermediates that end to mineralize. Furthermore, the results demonstrated the release chloride (Cl-) ions at the first stages of HCQ degradation. In addition, the organic nitrogen was converted mainly into NO3 - and NH4 + and small amounts of volatile nitrogen species (NH3 and NOx). Chromatography analysis confirmed the formation of 7-chloro-4-quinolinamine (CQLA), oxamic and oxalic acids as intermediates of HCQ degradation by EO using BDD anode. The combination of EO with UV irradiation or sonication enhances the kinetics and the efficacy of HCQ oxidation. PEO requires the lowest energy consumption (EC) of 63 kWh/m3 showing its cost-effectiveness. PEO has the potential to be an excellent alternative method for the treatment of wastewaters contaminated with HCQ drug and its derivatives.
| S-EPMC7363609 | biostudies-literature
Project description:As one of the most powerful approaches to mechanistically understanding complex chemical reactions and performing simulations or predictions, kinetic modeling has been widely used to investigate advanced oxidation processes (AOPs). However, most of the available models are built based on limited systems or reaction mechanisms so they cannot be readily extended to other systems or reaction conditions. To overcome such limitations, this study developed a comprehensive model on phenol oxidation using over 540 reactions, covering the most common reaction mechanisms in nine AOPs-four peroxymonosulfate (PMS), four peroxydisulfate (PDS), and one H2O2 systems-and considering product formation and the effects of co-existing anions (chloride, bromide, and carbonate). Existing models in the literature were first gathered and then revised by correcting inaccurately used reactions and adding other necessary reactions. Extensive model tuning and validation were next conducted by fitting the model against experimental data from both this study and the literature. The effects of anions were found to follow PDS/CuO > H2O2/UV > other PDS or PMS systems. Halogenated organic byproducts were mainly observed in the PMS systems in the presence of halides. Most of the 543 reactions were found to be important based on the sensitivity analysis, with some anions-involved reactions being among the most important, which explained why these anions substantially altered some of the reaction systems. With this comprehensive model, a deep understanding and reliable prediction can be made for the oxidation of phenol (and likely other phenolic compounds) in systems containing one or more of the above AOPs.
| S-EPMC8766555 | biostudies-literature
Project description:Efficient H2 harvesting from wastewater instead of pure water can minimize fresh water consumption, which is expected to solve the problem of water shortage in H2 production process and contribute to carbon neutrality in the environmental remediation, but the inevitable electron depletion caused by electron-consuming pollutants will result in an exhausted H2 evolution reaction (HER) performance. In this paper, by coupling piezocatalysis and advanced oxidation processes (AOPs) by a MoS2/Fe0/peroxymonosulfate (PMS) ternary system, extensive types of wastewater achieved considerable H2 generation, which exceeded the yield in pure water with synchronous advanced degradation of organic pollutants. In addition, profiting from the crucial bridging role of PMS, the H2 yield in nitrobenzene wastewater after the introduction of PMS-based AOPs increased 3.37-fold from 267.7 μmol·g-1·h-1 to 901.0 μmol·g-1·h-1 because the presence of PMS both thermodynamically benefited MoS2 piezocatalytic H2 evolution and eliminated the electron depletion caused by organic pollutants. By this way, the original repressed H2 evolution performance in substrate of wastewater not only was regained but even showed a significant enhancement than that in pure water (505.7 μmol·g-1·h-1). Additionally, the cyclonic piezoelectric reactor was preliminarily designed for future industrialization. This strategy provided a valuable path for the recycling of actual wastewater by fuel production and synchronous advanced treatment.
| S-EPMC9963735 | biostudies-literature
Project description:Disinfection is usually the final step in water treatment and its effectiveness is of paramount importance in ensuring public health. Chlorination, ultraviolet (UV) irradiation and ozone (O3) are currently the most common methods for water disinfection; however, the generation of toxic by-products and the non-remnant effect of UV and O3 still constitute major drawbacks. Photo-assisted electrochemical advanced oxidation processes (EAOPs) on the other hand, appear as a potentially effective option for water disinfection. In these processes, the synergism between electrochemically produced active species and photo-generated radicals, improve their performance when compared with the corresponding separate processes and with other physical or chemical approaches. In photo-assisted EAOPs the inactivation of pathogens takes place by means of mechanisms that occur at different distances from the anode, that is: (i) directly at the electrode's surface (direct oxidation), (ii) at the anode's vicinity by means of electrochemically generated hydroxyl radical species (quasi-direct), (iii) or at the bulk solution (away from the electrode surface) by photo-electrogenerated active species (indirect oxidation). This review addresses state of the art reports concerning the inactivation of pathogens in water by means of photo-assisted EAOPs such as photo-electrocatalytic process, photo-assisted electrochemical oxidation, photo-electrocoagulation and cathodic processes. By focusing on the oxidation mechanism, it was found that while quasi-direct oxidation is the preponderant inactivation mechanism, the photo-electrocatalytic process using semiconductor materials is the most studied method as revealed by numerous reports in the literature. Advantages, disadvantages, trends and perspectives for water disinfection in photo-assisted EAOPs are also analyzed in this work.
| S-EPMC8121763 | biostudies-literature
Project description:Coumarins represent a broad class of compounds with pronounced pharmacological properties and therapeutic potential. The pursuit of the commercialization of these compounds requires the establishment of controlled and highly efficient degradation processes, such as advanced oxidation processes (AOPs). Application of this methodology necessitates a comprehensive understanding of the degradation mechanisms of these compounds. For this reason, possible reaction routes between HO• and recently synthesized aminophenol 4,7-dihydroxycoumarin derivatives, as model systems, were examined using electron paramagnetic resonance (EPR) spectroscopy and a quantum mechanical approach (a QM-ORSA methodology) based on density functional theory (DFT). The EPR results indicated that all compounds had significantly reduced amounts of HO• radicals present in the reaction system under physiological conditions. The kinetic DFT study showed that all investigated compounds reacted with HO• via HAT/PCET and SPLET mechanisms. The estimated overall rate constants (koverall) correlated with the EPR results satisfactorily. Unlike HO• radicals, the newly formed radicals did not show (or showed negligible) activity towards biomolecule models representing biological targets. Inactivation of the formed radical species through the synergistic action of O2/NOx or the subsequent reaction with HO• was thermodynamically favored. The ecotoxicity assessment of the starting compounds and oxidation products, formed in multistage reactions with O2/NOx and HO•, indicated that the formed products showed lower acute and chronic toxicity effects on aquatic organisms than the starting compounds, which is a prerequisite for the application of AOPs procedures in the degradation of compounds.
| S-EPMC9916318 | biostudies-literature
Project description:Landfill leachate membrane concentrate (LLMC) is a type of non-biodegradable wastewater intercepted by the membrane filtration of the landfill leachate membrane bioreactor (MBR) effluent. The concentrations of chemical oxygen demand (COD) and ammonia nitrogen (NH4+-N) in the LLMC collected from a landfill in Beijing were determined to be 4700 mg/L and 487 mg/L, 2-5 times higher than those in the MBR effluent. The photoelectro oxidation (PEO) followed with the NaClO enhanced Fe2+ coagulation were more effective for the removal of COD than the Fenton oxidation followed with the enhanced coagulation. The final removal efficiencies of COD, UV254, NH4+-N and color degree were 86%, 95%, 93% and 95% with Fe2+ (90 mmol/L) and NaClO (60 mmol/L, Fe2+:NaClO = 1.5:1), and PEO for 3 hours with a current density of 400 A/m2. Due to the existence of Cl-, the chlorinated intermediates, which would be more toxic, were detected in the PEO treatment. However, the intermediates could be eliminated finally. As a result, the NaClO enhanced Fe2+ coagulation treatment combined with PEO treatment was efficient for the treatment of LLMC.
| S-EPMC6104102 | biostudies-literature
Project description:Remdesivir (RDV), dexamethasone (DEX) and hydroxychloroquine (HCQ) were widely used in the treatment of COVID-19 pneumonia, possibly causing environmental risks and drug-resistance viruses. This study elucidated the degradation mechanisms and potential toxicity risks of the three anti-COVID-19 drugs by UV and ultraviolet-coupled advanced oxidation processes (UV/AOPs). All the drugs could be degraded by more than 98% within 3 min under the following optimal conditions: pH of 5.0 and drug-to-oxidant (H2O2) molar ratio of 1:200. Combined with density functional theory (DFT) analysis and high-performance liquid chromatography quadrupole time-of-flight mass spectrometry (HPLC-QTOF-MS), twenty-four transformation products (TPs) were detected and the main degradation pathways were investigated. Based on bacterial luminescence inhibition test and the peak-area evolution of TPs, RDV and HCQ showed an obvious toxicity-increase region when TPs were generated in large quantities, while the toxicity of DEX continued to decline during degradation processes. By QSAR predictions, the main contributors to the toxicity evolution during the UV/AOPs were predicted. Halogen-containing TPs showed significantly higher toxicity than other TPs, and thus the chlorine-containing structure in HCQ presented the potential toxicity. Appropriate reaction parameters and adequate reaction time for the UV/AOPs could eliminate the toxicity of TPs and ensure environmental safety. This study could play a positive role in the treatment of anti-COVID-19 drugs and their environmental hazard assessment.
| S-EPMC9107282 | biostudies-literature
Project description:Advanced oxidation processes (AOPs) have been introduced to deal with different types of water pollution. They cause effective chemical destruction of pollutants, yet leading to a mixture of transformation by-products, rather than complete mineralization. Therefore, the aim of our study was to understand complex degradation processes induced by different AOPs from chemical and ecotoxicological point of view. Phenol, 2,4-dichlorophenol, and pentachlorophenol were used as model pollutants since they are still common industrial chemicals and thus encountered in the aquatic environment. A comprehensive study of efficiency of several AOPs was undertaken by using instrumental analyses along with ecotoxicological assessment. Four approaches were compared: ozonation, photocatalytic oxidation with immobilized nitrogen-doped TiO2 thin films, the sequence of both, as well as electrooxidation on boron-doped diamond (BDD) and mixed metal oxide (MMO) anodes. The monitored parameters were: removal of target phenols, dechlorination, transformation products, and ecotoxicological impact. Therefore, HPLC-DAD, GC-MS, UHPLC-MS/MS, ion chromatography, and 48 h inhibition tests on Daphnia magna were applied. In addition, pH and total organic carbon (TOC) were measured. Results show that ozonation provides by far the most suitable pattern of degradation accompanied by rapid detoxification. In contrast, photocatalysis was found to be slow and mild, marked by the accumulation of aromatic products. Preozonation reinforces the photocatalytic process. Regarding the electrooxidations, BDD is more effective than MMO, while the degradation pattern and transformation products formed depend on supporting electrolyte.
| S-EPMC8950015 | biostudies-literature
Project description:Presence of SARS-CoV-2 in wastewater is a major concern as the wastewater meets rivers and other water bodies and is used by the population for various purposes. Hence it is very important to treat sewage water in an efficient manner in order to reduce the public health risk. In the present work, various advanced oxidation processes (AOPs) have been evaluated for disinfection of SARS-CoV-2 from sewage water collected from STP inlet of academic institutional residential. The sewage water was subjected to ten AOPs, which include Ozone (O3), Hydrodynamic cavitation (HC), Ultraviolet radiation (UV), and their hybrid combinations like HC/O3, HC/O3/H2O2, HC/H2O2, O3/UV, UV/H2O2, UV/H2O2/O3, and O3/H2O2 to reduce SARS-CoV-2 viral load. Further, AOP treated sewage water was subjected to total nucleic acid isolation followed by RT-qPCR for viral load estimation. The sewage water treatment techniques were evaluated based on their viral concentration-reducing efficiency. It was found that ozone and ozone-coupled hybrid AOPs showed the most promising result with more than 98 % SARS-CoV-2 viral load reducing efficiency from sewage water. Interestingly, the best six AOPs used in this study significantly reduced both the SARS-CoV-2 and PMMoV (faecal indicator) viral load and improved water quality in terms of increasing DO and decreasing TOC.
| S-EPMC10008039 | biostudies-literature