Effects of blended-cement paste chemical composition changes on some strength gains of blended-mortars.
Ontology highlight
ABSTRACT:
SUBMITTER: Kirgiz MS
PROVIDER: S-EPMC3920847 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Curing by CO2 is a way to utilize CO2 to reduce greenhouse gas emissions. Placing early-age cement paste in a CO2 chamber or pressure vessel accelerates its strength development. Cement carbonation is attributed to the quickened strength development, and CO2 uptake can be quantitatively evaluated by measuring CO2 gas pressure loss in the pressure vessel. A decrease in CO2 gas pressure is observed with all cement pastes and mortar samples regardless of the mix proportion and the casting method; one method involves compacting a low water-to-cement ratio mix, and the other method comprises a normal mix consolidated in a mold. The efficiency of the CO2 curing is superior when a 20% concentration of CO2 gas is supplied at a relative humidity of 75%. CO2 uptake in specimens with the same CO2 curing condition is different for each specimen size. As the specimen scale is larger, the depth of carbonation is smaller. Incorporating colloidal silica enhances the carbonation as well as the hydration of cement, which results in contributing to the increase in the 28-day strength.
| S-EPMC7503678 | biostudies-literature
Project description:To understand the main properties of cement, a ubiquitous material, a sound description of its chemistry and mineralogy, including its reactivity in aggressive environments and its mechanical properties, is vital. In particular, the porosity distribution and associated sample carbonation, both of which affect cement's properties and durability, should be quantified accurately, and their kinetics and mechanisms of formation known both in detail and in situ. However, traditional methods of cement mineralogy analysis (e.g. chemical mapping) involve sample preparation (e.g. slicing) that can be destructive and/or expose cement to the atmosphere, leading to preparation artefacts (e.g. dehydration). In addition, the kinetics of mineralogical development during hydration, and associated porosity development, cannot be examined. To circumvent these issues, X-ray diffraction computed tomography (XRD-CT) has been used. This allowed the mineralogy of ternary blended cement composed of clinker, fly ash and blast furnace slag to be deciphered. Consistent with previous results obtained for both powdered samples and dilute systems, it was possible, using a consolidated cement paste (with a water-to-solid ratio akin to that used in civil engineering), to determine that the mineralogy consists of alite (only detected in the in situ hydration experiment), calcite, calcium silicate hydrates (C-S-H), ettringite, mullite, portlandite, and an amorphous fraction of unreacted slag and fly ash. Mineralogical evolution during the first hydration steps indicated fast ferrite reactivity. Insights were also gained into how the cement porosity evolves over time and into associated spatially and time-resolved carbonation mechanisms. It was observed that macroporosity developed in less than 30?h of hydration, with pore sizes reaching about 100-150?µm in width. Carbonation was not observed for this time scale, but was found to affect the first 100?µm of cement located around macropores in a sample cured for six months. Regarding this carbonation, the only mineral detected was calcite.
| S-EPMC5947719 | biostudies-literature
Project description:Understanding the relationship between the intrinsic characteristics of materials (such as rheological properties and structural build-up) and printability and controlling intrinsic characteristics of materials through additives to achieve excellent printability is vital in digital concrete additive manufacturing. This paper aims at studying the effects of material's structural build-up on the interlayer bond strength of 3DPC with different time gaps. Structural build-up can indirectly affect the interlayer bond strength by affecting the surface moisture of concrete. Based on the structural build-up of 3DPC, a new parameter, maximum operational time (MOT), is proposed, which can be considered as the limit of time gap to ensure high interlayer bond strength. Slump-retaining polycarboxylate superplasticizer (TS) slightly slows down the physical flocculation rate, but increases the maximum operational time of the cement paste. Nano clay significantly increases the sort-term structural build-up rate and has the function of internal curing and water retaining. Composite with nano-clay and TS can reduce the loss of surface moisture of 3D printed layers, prevent the formation of interface weak layer, and increase the interlayer bond strength between printed layers. This contribution can provide new insight into the design of 3D-printed ink with good extrudability, outstanding buildability, and excellent interlayer bond strength.
| S-EPMC7824854 | biostudies-literature
Project description:The effects of 10% metakaolin addition on compressive strength, water absorption, shrinkage and microstructure evolution of cement paste after elevated temperatures exposure from room temperature to 800 °C were evaluated. The experimental results show that compressive strength increases at 200 °C and 400 °C compared with that obtained at ambient temperature. Up to 800 °C, compressive strength decreases rapidly. The addition of 10% metakaolin leads to the enhancement of compressive strength regardless of exposure temperatures. After thermal exposure at 400 °C, compressive strength reaches the maximum value. Thermal exposure degrades pore structure. A polynomial equation was used to indicate the shrinkage of cement paste or metakaolin-blended cement paste with testing days. Mechanical properties, permeability resistance, and shrinkage in cement pastes are closely related to the microstructure development. 10% metakaolin addition presents better thermal resistance, lower shrinkage and denser microstructure compared with pure cement paste before and after thermal exposure.
| S-EPMC6471423 | biostudies-literature
Project description:Capillary effects, such as imbibition drying cycles, impact the mechanics of granular systems over time. A multiscale poromechanics framework was applied to cement paste, which is the most common building material, experiencing broad humidity variations over the lifetime of infrastructure. First, the liquid density distribution at intermediate to high relative humidity is obtained using a lattice gas density functional method together with a realistic nanogranular model of cement hydrates. The calculated adsorption/desorption isotherms and pore size distributions are discussed and compare well with nitrogen and water experiments. The standard method for pore size distribution determination from desorption data is evaluated. Second, the integration of the Korteweg liquid stress field around each cement hydrate particle provided the capillary forces at the nanoscale. The cement mesoscale structure was relaxed under the action of the capillary forces. Local irreversible deformations of the cement nanograins assembly were identified due to liquid-solid interactions. The spatial correlations of the nonaffine displacements extend to a few tens of nanometers. Third, the Love-Weber method provided the homogenized liquid stress at the micrometer scale. The homogenization length coincided with the spatial correlation length of nonaffine displacements. Our results on the solid response to capillary stress field suggest that the micrometer-scale texture is not affected by mild drying, while nanoscale irreversible deformations still occur. These results pave the way for understanding capillary phenomena-induced stresses in heterogeneous porous media ranging from construction materials to hydrogels and living systems.
| S-EPMC6561161 | biostudies-literature
Project description:The objective of this study is to assess whether the carbonation process can modify the physicochemical characteristics of the natural radionuclides of the three natural radioactive series, together with 40K. Three mortar specimens with different percentages of ground granulated blast-furnace slag (GGBFS), cured under water for 1, 3, 7, 14, or 28 days, were subjected to a natural carbonation process. Activity concentrations for the solid and ground mortars were determined by gamma spectrometry and by radiochemical separation of isotopic uranium. The novelty of this paper relies principally on the study we have carried out, for the first time, of the radiological characteristics of carbonated Portland cement mortars. It was found that the chemical properties of the 3 mortar specimens were not affected by the carbonation process, with particular attention placed on uranium (238U, 235U, and 234U), the activity concentrations of which were equivalent to the 226Ra results and ranged from 5.5 ± 1.6 Bq kg−1 to 21.4 ± 1.2 Bq kg−1 for the 238U. The average activity concentrations for the 3 types of mortars were lower than 20.1 Bq kg−1, 14.5 Bq kg−1, and 120.2 Bq kg−1 for the 226Ra, 232Th (212Pb), and 40K, respectively. Annual effective dose rates were equivalent to the natural background of 0.024 mSv. In addition, it was observed that the variation rate for the 222Rn emanation was due primarily to the Portland cement hydration and not due to the pore size redistribution as a consequence of the carbonation process. This research will provide new insights into the potential radiological risk from carbonated cement-based materials. Moreover, the assessment that is presented in this study will convey valuable information for future research that will explore the activity concentration of building materials containing NORM materials.
| S-EPMC9100595 | biostudies-literature
Project description:To reduce the inhibiting effects of polystyrene-based emulsion on the hydration process and strength development of cementitious materials, an amphiphilic diblock copolymer polystyrene-block-poly(acrylic acid) (PS-b-PAA) was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization and demonstrated in cement paste system for improving the resistance to water absorption without significantly reducing 28-day compressive strength. Firstly, the dissolved PS-b-PAA was added into water, and it quickly self-assembled into amphiphilic 80 nm-sized micelles with hydrophobic polystyrene-based core and hydrophilic poly(acrylic acid)-based shell. The improved dispersion compared to that of polystyrene emulsion may minimize the inhibiting effects on strength development, as the effects of PS-b-PAA micelle as hydrophobic admixtures on rheological properties, compressive strength, water absorption, hydration process, and pore structure of 28-day cement pastes were subsequently investigated. In comparison with the control sample, the saturated water absorption amount of cement pastes with 0.4% PS-b-PAA was reduced by 20%, and the 28-day compressive strength was merely reduced by 2.5%. Besides, the significantly increased hydrophobicity instead of slightly decreased porosity of cement paste with PS-b-PAA may contribute more to the reduced water adsorption characteristics. The study based on prepared PS-b-PAA micelle suggested a promising alternative strategy for fabricating polystyrene-modified concrete with reduced water absorption and unaffected compressive strength.
| S-EPMC10056578 | biostudies-literature
Project description:Fly ashes from coal combustion in circulating fluidized bed boilers in three power plants were tested as a potential additive to cement binder in concrete. The phase composition and microstructure of cement pastes containing fluidized bed fly ash was studied. The fractions of cement substitution with fluidized bed fly ash were 20% and 30% by weight. X-ray diffraction (XRD) tests and thermal analyses (derivative thermogravimetry (DTG), differential thermal analysis (DTA) and thermogravimetry (TG)) were performed on ash specimens and on hardened cement paste specimens matured in water for up to 400 days. Quantitative evaluation of the phase composition as a function of fluidized bed fly ash content revealed significant changes in portlandite content and only moderate changes in the content of ettringite.
| S-EPMC6747977 | biostudies-literature
Project description:Redispersible powders based on soft core-hard shell polymer particles can be used as additives in polymer-cement mortars. The role of this morphology on the spray-drying production of these powders and on the crack-bridging properties of the corresponding cement-based membranes is investigated. Different polymer latexes at high solid content with varied core-shell ratio, shell thickness and chemical composition (hardness) were prepared from styrene and 2-ethylhexyl acrylate monomers via semi-batch emulsion polymerization. The latexes were characterized in terms of size, composition, and glass transition temperature (T g ), and spray-dried to obtain redispersible polymer powders (RPPs) using poly (vinyl alcohol) and limestone powder as anti-caking agents. The polymer powders were mixed with a mortar mixture and redispersed in water to produce cement-based membranes, which were tested for crack-bridging properties at different temperatures. The results showed that it was not possible to spray-dry a dispersion of homogeneous polymer particles with T g of -25 ∘ C, unless these particles are protected by much harder (high T g ) shell. In particular, it was observed that a thicker shell improved the spray-ability, but lowered the crack-bridging properties of the produced membrane. A trade-off between these two was revealed to be the key for the optimal design of the polymer nanoparticles, as proven by the systematic study of the core-shell morphology reported in this work. The best compromise was shown to consist of particles larger than 300 nm, shell thickness of about 5 nm, and core-shell ratio of 97%, with styrene content in the shell not larger than 80% to avoid excessive hydrophobicity.
| S-EPMC6403678 | biostudies-literature
Project description:Waste utilization is crucial for achieving sustainability in the construction industry. This article provides data that demonstrate the possibility of industrial waste utilization in high volumes to enhance cementitious composites. This dataset could help researchers understand the cement paste composites' behavior in the fresh and hardened state. The data were obtained from the physical, mechanical, and durability tests of laboratory-produced samples. The composites were tested at 7, 28, and 90-days of hardening, according to the American Society for Testing and Materials (ASTM) standards. The obtained values were then evaluated using the DataFit curve fitting (nonlinear regression) and data plotting software. Additionally, two spreadsheets were created to help researchers calculate their weights and calculate the bulk specific gravity, water absorption, and porosity values. The detailed information related to the data described here can be found in "High-volume marble substitution in cement-paste: towards a better sustainability" [1].
| S-EPMC6811925 | biostudies-literature