Hydrothermal preparation and characterization of ultralong strontium-substituted hydroxyapatite whiskers using acetamide as homogeneous precipitation reagent.
Ontology highlight
ABSTRACT:
SUBMITTER: Xu J
PROVIDER: S-EPMC3925520 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Injectable nanoscale hydroxyapatite (nHA) systems are highly promising biomaterials to address clinical needs in bone tissue regeneration, due to their excellent biocompatibility, bioinspired nature, and ability to be delivered in a minimally invasive manner. Bulk strontium-substituted hydroxyapatite (SrHA) is reported to encourage bone tissue growth by stimulating bone deposition and reducing bone resorption, but there are no detailed reports describing the preparation of a systematic substitution up to 100% at the nanoscale. The aim of this work was therefore to fabricate systematic series (0-100 atomic% Sr) of SrHA pastes and gels using two different rapid-mixing methodological approaches, wet precipitation and sol-gel. The full range of nanoscale SrHA materials were successfully prepared using both methods, with a measured substitution very close to the calculated amounts. As anticipated, the SrHA samples showed increased radiopacity, a beneficial property to aid in vivo or clinical monitoring of the material in situ over time. For indirect methods, the greatest cell viabilities were observed for the 100% substituted SrHA paste and gel, while direct viability results were most likely influenced by material disaggregation in the tissue culture media. It was concluded that nanoscale SrHAs were superior biomaterials for applications in bone surgery, due to increased radiopacity and improved biocompatibility.
| S-EPMC8235522 | biostudies-literature
Project description:The physiological and transcriptomic response of the metal resistant bacterium Cupriavidus metallidurans strain CH34 in response to stable (non-radioactive) strontium ions (Sr) was investigated. C. metallidurans CH34 could survive and proliferate in the presence of relatively high concentrations of SrCl2 (D10 is 70mM, MIC is 120 mM). Precipitation of Sr as strontium carbonate was observed in the culture during aerobic growth of CH34 in the presence of 60 mM SrCl2. To identify the cellular mechanisms involved in the bioprecipitation process, gene expression in the cells was analyzed after short-time (30 min) exposure to low (5 mM) and high (60 mM) concentrations of SrCl2. The transcription of the gene clusters annotated as hmyFCBA and czcCBADRS, coding for ion efflux pumps, was significantly induced following exposure to Sr, and not with Ca. There were also significant changes is the transcription of the genes encoding TctCBA proteins involved in citrate uptake and two hypothetical porin coding genes following exposure Sr and Ca. These results highlight a specific molecular response of bacterium Cupriavidus metallidurans CH34 to Sr, including the identification of putative Sr specific efflux pumps, and thus the potential of this bacterium to distinguish Sr from Ca. These findings will help to better understand natural Sr (and Ca) microbial weathering or mineralization processes in the environment, and could be of interest for bioremediation or bioprocessing of (radioactive) Sr-containing water, soil or waste.
2012-06-07 | GSE29863 | GEO
Project description:In this study, as a measure to enhance the antimicrobial activity of biomaterials, the selenium ions have been substituted into hydroxyapatite (HA) at different concentration levels. To balance the potential cytotoxic effects of selenite ions (SeO32-) in HA, strontium (Sr2+) was co-substituted at the same concentration. Selenium and strontium-substituted hydroxyapatites (Se-Sr-HA) at equal molar ratios of x Se/(Se + P) and x Sr/(Sr + Ca) at (x = 0, 0.01, 0.03, 0.05, 0.1, and 0.2) were synthesized via the wet precipitation route and sintered at 900 °C. The effect of the two-ion concentration on morphology, surface charge, composition, antibacterial ability, and cell viability were studied. X-ray diffraction verified the phase purity and confirmed the substitution of selenium and strontium ions. Acellular in vitro bioactivity tests revealed that Se-Sr-HA was highly bioactive compared to pure HA. Se-Sr-HA samples showed excellent antibacterial activity against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus carnosus) bacterial strains. In vitro cell-material interaction, using human osteosarcoma cells MG-63 studied by WST-8 assay, showed that Se-HA has a cytotoxic effect; however, the co-substitution of strontium in Se-HA offsets the negative impact of selenium and enhanced the biological properties of HA. Hence, the prepared samples are a suitable choice for antibacterial coatings and bone filler applications.
| S-EPMC8072711 | biostudies-literature
Project description:Hydroxyapatite (HAp) is the main inorganic component and an essential part of hard bone and teeth. Due to its excellent biocompatibility, bioactivity, and osteoconductivity, synthetic HAp has been widely used as a bone substitute, cell carrier, and therapeutic gene or drug carrier. Recently, numerous studies have demonstrated that strontium-substituted hydroxyapatite (SrHAp) not only enhances osteogenesis but also inhibits adipogenesis in mesenchymal stem cells. Mesoporous SrHAp has been successfully synthesized via a traditional template-based process and has been found to possess better drug loading and release efficiencies than SrHAp. In this study, strontium-substituted hydroxyapatite-CaO-CaCO? nanofibers with a mesoporous structure (mSrHANFs) were fabricated using a sol?gel method followed by electrospinning. X-ray diffraction analysis revealed that the contents of CaO and CaCO? in the mSrHANFs decreased as the doping amount of Sr increased. Scanning electron microscopy (SEM) images showed that the average diameter of the mSrHANFs was approximately 200~300 nm. The N? adsorption?desorption isotherms demonstrated that the mSrHANFs possessed a mesoporous structure and that the average pore size was approximately 20~25 nm. Moreover, the mSrHANFs had excellent drug- loading efficiency and could retard the burst release of tetracycline (TC) to maintain antibacterial activity for over 3 weeks. Hence, mSrHANFs have the potential to be used as drug carriers in bone tissue engineering.
| S-EPMC6321556 | biostudies-literature
Project description:Oxalic acid is an important separation agent in the technology of lanthanides, actinides, and transition metals. Thanks to the low solubility of the oxalate salts, the metal ions can be easily precipitated into crystalline material, which is a convenient precursor for oxide preparation. However, it is difficult to obtain oxalate monocrystals due to the fast precipitation. We have developed a synthetic route for homogeneous precipitation of oxalates based on the thermal decomposition of oxamic acid. This work primarily concerns lanthanide oxalates; however, since no information was found about oxamic acid, a brief characterization was included. The precipitation method was tested on selected elements (Ce, Pr, Gd, Er, and Yb), for which the kinetics was determined at 100 °C. Several scoping tests at 90 °C or using different starting concentrations were performed on Ce and Gd. The reaction products were studied by means of solid-state analysis with focus on the structure and morphology. Well-developed microcrystals were successfully synthesized with the largest size for gadolinium oxalate.
| S-EPMC9016886 | biostudies-literature
Project description:The physiological and transcriptomic response of the metal resistant bacterium Cupriavidus metallidurans strain CH34 in response to stable (non-radioactive) strontium ions (Sr) was investigated. C. metallidurans CH34 could survive and proliferate in the presence of relatively high concentrations of SrCl2 (D10 is 70mM, MIC is 120 mM). Precipitation of Sr as strontium carbonate was observed in the culture during aerobic growth of CH34 in the presence of 60 mM SrCl2. To identify the cellular mechanisms involved in the bioprecipitation process, gene expression in the cells was analyzed after short-time (30 min) exposure to low (5 mM) and high (60 mM) concentrations of SrCl2. The transcription of the gene clusters annotated as hmyFCBA and czcCBADRS, coding for ion efflux pumps, was significantly induced following exposure to Sr, and not with Ca. There were also significant changes is the transcription of the genes encoding TctCBA proteins involved in citrate uptake and two hypothetical porin coding genes following exposure Sr and Ca. These results highlight a specific molecular response of bacterium Cupriavidus metallidurans CH34 to Sr, including the identification of putative Sr specific efflux pumps, and thus the potential of this bacterium to distinguish Sr from Ca. These findings will help to better understand natural Sr (and Ca) microbial weathering or mineralization processes in the environment, and could be of interest for bioremediation or bioprocessing of (radioactive) Sr-containing water, soil or waste. Two-condition experiments. Comparing samples after induction with metals (Sr, Ca) versus non-induced samples. Biological triplicate. Each array contains 3 technical replicates.
2012-06-06 | E-GEOD-29863 | biostudies-arrayexpress
Project description:A calcium (Ca)-deficient hydroxyapatite was investigated for its potential to remove Sr2+ from environmentally relevant water. We conducted sorption tests on solutions containing magnesium ion (Mg2+) and calcium ion (Ca2+) as competing cations at a strontium ion (Sr2+) concentration of 0.05?mmol/L. The Ca-deficient hydroxyapatite maintained a high Sr2+ sorption ratio of above 80% in the presence of Mg2+ and Ca2+ at the concentrations between 0.1 and 1.0?mmol/L, whereas the stoichiometric hydroxyapatite showed a lower ratio even in the presence of small amounts of Mg2+ and Ca2+ (72% for Mg2+ and 51% for Ca2+ at 0.1?mmol/L). For solutions with various Sr2+ concentrations between 0.01 and 10?mmol/L, Ca-deficient hydroxyapatite exhibited a higher Sr2+ sorption ratio than stoichiometric hydroxyapatite. The bonding states of Sr2+ on the Ca-deficient hydroxyapatite were evaluated by extended X-ray absorption fine structure measurements. The results indicated that there are specific sorption sites in Ca-deficient hydroxyapatite where Sr2+ is stably and preferentially immobilized.
| S-EPMC5437100 | biostudies-literature
Project description:Additive manufactured, porous bone implants have the potential to improve osseointegration and reduce failure rates of orthopaedic devices. Substantially porous implants are increasingly used in a number of orthopaedic applications. HA plasma spraying-a line of sight process-cannot coat the inner surfaces of substantially porous structures, whereas electrochemical deposition of calcium phosphate can fully coat the inner surfaces of porous implants for improved bioactivity, but the osseous response of different types of hydroxyapatite (HA) coatings with ionic substitutions has not been evaluated for implants in the same in vivo model. In this study, laser sintered Ti6Al4V implants with pore sizes of Ø 700 μm and Ø 1500 μm were electrochemically coated with HA, silicon-substituted HA (SiHA), and strontium-substituted HA (SrHA), and implanted in ovine femoral condylar defects. Implants were retrieved after 6 weeks and histological and histomorphometric evaluation were compared to electrochemically coated implants with uncoated and HA plasma sprayed controls. The HA, SiHA and SrHA coatings had Ca:P, Ca:(P+Si) and (Ca+Sr):P ratios of 1.53, 1.14 and 1.32 respectively. Electrochemically coated implants significantly promoted bone attachment to the implant surfaces of the inner pores and displayed improved osseointegration compared to uncoated scaffolds for both pore sizes (p<0.001), whereas bone ingrowth was restricted to the surface for HA plasma coated or uncoated implants. Electrochemically coated HA implants achieved the highest osseointegration, followed by SrHA coated implants, and both coatings exhibited significantly more bone growth than plasma sprayed groups (p≤0.01 for all 4 cases). SiHA had significantly more osseointegration when compared against the uncoated control, but no significant difference compared with other coatings. There was no significant difference in ingrowth or osseointegration between pore sizes, and the bone-implant-contact was significantly higher in the electrochemical HA than in SiHA or SrHA. These results suggest that osseointegration is insensitive to pore size, whereas surface modification through the presence of an osteoconductive coating plays an important role in improving osseointegration, which may be critically important for extensively porous implants.
| S-EPMC6953817 | biostudies-literature
Project description:Surface modification of orthopedic and dental implants has been demonstrated to be an effective strategy to accelerate bone healing at early implantation times. Among the different alternatives, coating implants with a layer of hydroxyapatite (HAp) is one of the most used techniques, due to its excellent biocompatibility and osteoconductive behavior. The composition and crystalline structure of HAp allow for numerous ionic substitutions that provide added value, such as antibiotic properties or osteoinduction. In this article, we will review and critically analyze the most important advances in the field of substituted hydroxyapatite coatings. In recent years substituted HAp coatings have been deposited not only on orthopedic prostheses and dental implants, but also on macroporous scaffolds, thus expanding their applications towards bone regeneration therapies. Besides, the capability of substituted HAps to immobilize proteins and growth factors by non-covalent interactions has opened new possibilities for preparing hybrid coatings that foster bone healing processes. Finally, the most important in vivo outcomes will be discussed to understand the prospects of substituted HAp coatings from a clinical point of view.
| S-EPMC7116284 | biostudies-literature
Project description:Synthetic bone graft substitutes have attracted increasing attention in tissue engineering. This study aimed to fabricate a novel, bioactive, porous scaffold that can be used as a bone substitute. Strontium and zinc doped nano-hydroxyapatite (Sr/Zn n-HAp) were synthesized by a water-based sol-gel technique. Sr/Zn n-HAp and poly (lactide-co-glycolide) (PLGA) were used to fabricate composite scaffolds by supercritical carbon dioxide technique. FTIR, XRD, TEM, SEM, and TGA were used to characterize Sr/Zn n-HAp and the composite scaffolds. The synthesized scaffolds were adequately porous with an average pore size range between 189 to 406 µm. The scaffolds demonstrated bioactive behavior by forming crystals when immersed in the simulated body fluid. The scaffolds after immersing in Tris/HCl buffer increased the pH value of the medium, establishing their favorable biodegradable behavior. ICP-MS study for the scaffolds detected the presence of Sr, Ca, and Zn ions in the SBF within the first week, which would augment osseointegration if implanted in the body. nHAp and their composites (PLGA-nHAp) showed ultimate compressive strength ranging between 0.4-19.8 MPa. A 2.5% Sr/Zn substituted nHAp-PLGA composite showed a compressive behavior resembling that of cancellous bone indicating it as a good candidate for cancellous bone substitute.
| S-EPMC8883951 | biostudies-literature