Optical particle sorting on an optofluidic chip.
Ontology highlight
ABSTRACT:
SUBMITTER: Leake KD
PROVIDER: S-EPMC3926539 | biostudies-other | 2013 Dec
REPOSITORIES: biostudies-other
Similar Datasets
Project description:A new waveguide design for an optofluidic chip is presented. It mitigates multi-mode behavior in solid and liquid-core waveguides by increasing fundamental mode coupling to 82% and 95%, respectively. Additionally, we demonstrate a six-fold improvement in lateral confinement of optically guided dielectric microparticles and double the detection efficiency of fluorescent particles.
| S-EPMC2860178 | biostudies-literature
Project description:We present a microfluidic cell-sorting device which augments microscopy with the capability to perform facile image-based cell sorting. This combination enables intuitive, complex phenotype sorting based on spatio-temporal fluorescence or cell morphology. The microfluidic device contains a microwell array that can be passively loaded with mammalian cells via sedimentation and can be subsequently inspected with microscopy. After inspection, we use the scattering force from a focused infrared laser to levitate cells of interest from their wells into a flow field for collection. First, we demonstrate image-based sorting predicated on whole-cell fluorescence, which could enable sorting based on temporal whole-cell fluorescence behavior. Second, we demonstrate image-based sorting predicated on fluorescence localization (nuclear vs whole-cell fluorescence), highlighting the capability of our approach to sort based on imaged subcellular events, such as localized protein expression or translocation events. We achieve postsort purities up to 89% and up to 155-fold enrichment of target cells. Optical manipulation literature and a direct cell viability assay suggest that cells remain viable after using our technique. The architecture is highly scalable and supports over 10 000 individually addressable trap sites. Our approach enables sorting of significant populations based on subcellular spatio-temporal information, which is difficult or impossible with existing widespread sorting technologies.
| S-EPMC2536524 | biostudies-literature
Project description:Optical traps have become widespread tools for studying biological objects on the micro and nanoscale. However, conventional laser tweezers and traps rely on bulk optics and are not compatible with current trends in optofluidic miniaturization. Here, we report a new type of particle trap that relies on propagation loss in confined modes in liquid-core optical waveguides to trap particles. Using silica beads and E. coli bacteria, we demonstrate unique key capabilities of this trap. These include single particle trapping with micron-scale accuracy at arbitrary positions over waveguide lengths of several millimeters, definition of multiple independent particle traps in a single waveguide, and combination of optical trapping with single particle fluorescence analysis. The exclusive use of a two-dimensional network of planar waveguides strongly reduces experimental complexity and defines a new paradigm for on-chip particle control and analysis.
| S-EPMC2856816 | biostudies-literature
Project description:We propose and demonstrate an on-chip optofluidic device allowing active oscillatory microrheological measurements with sub-μL sample volume, low cost and high flexibility. Thanks to the use of this optofluidic microrheometer it is possible to measure the viscoelastic properties of complex fluids in the frequency range 0.01-10 Hz at different temperatures. The system is based on the optical forces exerted on a microbead by two counterpropagating infrared laser beams. The core elements of the optical part, integrated waveguides and an optical modulator, are fabricated by fs-laser writing on a glass substrate. The system performance is validated by measuring viscoelastic solutions of aqueous worm-like micelles composed by Cetylpyridinium Chloride (CPyCl) and Sodium Salicylate (NaSal).
| S-EPMC7118116 | biostudies-literature
Project description:The analysis of individual biological nanoparticles has significantly advanced our understanding of fundamental biological processes but is also rapidly becoming relevant for molecular diagnostic applications in the emerging field of personalized medicine. Both optical and electrical methods for the detection and analysis of single biomolecules have been developed, but they are generally not used in concert and in suitably integrated form to allow for multimodal analysis with high throughput. Here we report on a dual-mode electrical and optical single-nanoparticle sensing device with capabilities that would not be available with each technique individually. The new method is based on an optofluidic chip with an integrated nanopore that serves as a smart gate to control the delivery of individual nanoparticles to an optical excitation region for ensemble-free optical analysis in rapid succession. We demonstrate electro-optofluidic size discrimination of fluorescent nanobeads, electro-optical detection of single fluorescently labeled influenza viruses, and the identification of single viruses within a mixture of equally sized fluorescent nanoparticles with up to 100% fidelity.
| S-EPMC4134182 | biostudies-literature
Project description:The optofluidic devices including optofluidic lens, optical switch and liquid prism have found widespread applications in imaging, optical communication and lighting. Here, we report a novel optofluidic device called optofluidic variable optical path modulator. Our proposed modulator consists of two main chambers. The two chambers are connected by two tubes to form a closed-loop fluidic system. Two immiscible liquids are filled into the two chambers and form two L-L interfaces. A transparent sheet is placed between one L-L interface to get flat interface. When a voltage is applied on the device, the flat interface can move up and down. Thus, variable optical path can be obtained by applying a voltage. To prove the concept, we fabricate an optofluidic device whose largest movable distance of L-L interface is ~7.5?mm and the optical path length change is ~1.15?mm. The proposed optofluidic device has potential applications in imaging, adaptive optics, optical detection and so on.
| S-EPMC6506494 | biostudies-literature
Project description:A novel method to realize an optical tweezer involving optofluidic operation in a microchannel is proposed. To manipulate the optical tweezer, light from an optical fiber is passed through both PDMS (polydimethylsiloxane)-air surface lenses and an optofluidic region, which is located in a control channel. Two liquids with different refractive indices (RIs) are introduced into the control channel to form two different flow patterns (i.e., laminar and segmented flows), depending on the liquid compositions, the channel geometry, and the flow rates. By altering the shapes of the interface of the two liquids in the optofluidic region, we can continuously or intermittently control the optical paths of the light. To demonstrate the functionality of the proposed method, optical tweezer operations on a chip are performed. Changing the flow pattern of two liquids with different RIs in the optofluidic region results in successful trapping of a 25 μm diameter microsphere and its displacement by 15 μm.
| S-EPMC3026034 | biostudies-other
Project description:The past two decades have witnessed the revolutionary development of optical trapping of nanoparticles, most of which deal with trapping stiffness larger than 10-8 N/m. In this conventional regime, however, it remains a formidable challenge to sort out sub-50-nm nanoparticles with single-nanometer precision, isolating us from a rich flatland with advanced applications of micromanipulation. With an insightfully established roadmap of damping, the synchronization between optical force and flow drag force can be coordinated to attempt the loosely overdamped realm (stiffness, 10-10 to 10-8 N/m), which has been challenging. This paper intuitively demonstrates the remarkable functionality to sort out single gold nanoparticles with radii ranging from 30 to 50 nm, as well as 100- and 150-nm polystyrene nanoparticles, with single nanometer precision. The quasi-Bessel optical profile and the loosely overdamped potential wells in the microchannel enable those aforementioned nanoparticles to be separated, positioned, and microscopically oscillated. This work reveals an unprecedentedly meaningful damping scenario that enriches our fundamental understanding of particle kinetics in intriguing optical systems, and offers new opportunities for tumor targeting, intracellular imaging, and sorting small particles such as viruses and DNA.
| S-EPMC5756665 | biostudies-literature
Project description:Solid-state nanopore sensing of ultralong genomic DNA molecules has remained challenging, as the DNA must be controllably delivered by its leading end for efficient entry into the nanopore. Herein, we introduce a nanopore sensor device designed for electro-optical detection and sorting of ultralong (300+ kilobase pair) genomic DNA. The fluidic device, fabricated in-silicon and anodically bonded to glass, uses pressure-induced flow and an embedded pillar array for controllable DNA stretching and delivery. Extremely low concentrations (50 fM) and sample volumes (?1 ?L) of DNA can be processed. The low height profile of the device permits high numerical aperture, high magnification imaging of DNA molecules, which remain in focus over extended distances. We demonstrate selective DNA sorting based on sequence-specific nick translation labeling and imaging at high camera frame rates. Nanopores are fabricated directly in the assembled device by laser etching. We show that uncoiling and stretching of the ultralong DNA molecules permits efficient nanopore capture and threading, which is simultaneously and synchronously imaged and electrically measured. Furthermore, our technique provides key insights into the translocation behavior of ultralong DNA and promotes the development of all-in-one micro/nanofluidic platforms for nanopore sensing of biomolecules.
| S-EPMC6933818 | biostudies-literature
Project description:Integrated biosensor platforms have become subjects of high interest for consolidated assay preparation and analysis to reduce sample-to-answer response times. By compactly combining as many biosensor processes and functions as possible into a single lab-on-chip device, all-in-one point-of-care devices can aid in the accessibility and speed of deployment due to their compact size and portability. Biomarker assay preparation and sensing are functionalities that are often carried out on separate devices, thus increasing opportunity of contamination, loss of sample volume, and other forms of error. Here, we demonstrate a complete lab-on-chip system combining sample preparation, on-chip optofluidic dye laser, and optical detection. We first show the integration of an on-chip distributed feedback dye laser for alignment-free optical excitation of particles moving through a fluidic channel. This capability is demonstrated by using Rhodamine 6G as the gain medium to excite single fluorescent microspheres at 575 nm. Next, we present an optofluidic PDMS platform combining a microvalve network (automaton) for sample preparation of nanoliter volumes, on-chip distributed feedback dye laser for target excitation, and optical detection. We conduct concurrent capture and fluorescence tagging of Zika virus nucleic acid on magnetic beads in 30 min. Target-carrying beads are then optically excited using the on-chip laser as they flow through an analysis channel, followed by highly specific fluorescence detection. This demonstration of a complete all-in-one biosensor is a tangible step in the development of a rapid, point-of-care device that can assist in limiting the severity of future outbreaks.
| S-EPMC9313335 | biostudies-literature