Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Multifunctional Eu3+- and Er3+/Yb3+-doped GdVO4 nanoparticles synthesized by reverse micelle method.

ABSTRACT: Synthesis of Eu(3+)- and Er(3+)/Yb(3+)-doped GdVO4 nanoparticles in reverse micelles and their multifunctional luminescence properties are presented. Using cyclohexane, Triton X-100, and n-pentanol as the oil, surfactant, and co-surfactant, respectively, crystalline nanoparticles with ~4 nm diameter are prepared at low temperatures. The particle size assessed using transmission electron microscopy is similar to the crystallite size obtained from X-ray diffraction measurements, suggesting that each particle comprises a single crystallite. Eu(3+)-doped GdVO4 nanoparticles emit red light through downconversion upon UV excitation. Er(3+)/Yb(3+)-doped GdVO4 nanoparticles exhibit several functions; apart from the downconversion of UV radiation into visible green light, they act as upconvertors, transforming near-infrared excitation (980 nm) into visible green light. The ratio of green emissions from (2)H11/2 → (2)I15/2 and (4)S3/2 → (4)I15/2 transitions is temperature dependent and can be used for nanoscale temperature sensing with near-infrared excitation. The relative sensor sensitivity is 1.11%K(-1), which is among the highest sensitivities recorded for upconversion-luminescence-based thermometers.

SUBMITTER: Gavrilovic TV

PROVIDER: S-EPMC3936229 | biostudies-other | 2014

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Eu3+, Tb3+- and Er3+, Yb3+-Doped α-MoO3 Nanosheets for Optical Luminescent Thermometry.

Project description:Here we report a novel synthesis approach for the preparation of α-MoO3:Ln3+ materials employing a two-step synthesis. Additionally, in this work the α-MoO3:Ln3+ materials are reported as potential optical thermometers for the first time. In this synthesis approach, first MoS2 2D nanosheets were prepared, which were further heat treated to obtain α-MoO3. These materials were fully characterized by powder X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray fluorescence (XRF), thermogravimetry (TG) and differential thermal analysis (DTA), transmission electron microscopy (TEM), and luminescence spectroscopy. Temperature-dependent luminescence measurements were carried out to determine the optical thermometric properties of two different types of α-MoO3:Ln3+ materials (Eu3+/Tb3+ downshifting and Er3+/Yb3+ upconversion luminescence systems). We demonstrate in this study that this class of material could be a potential candidate for temperature-sensing applications.

| S-EPMC6524054 | biostudies-literature

Color-tunable up-conversion emission in Y2O3:Yb3+, Er3+ nanoparticles prepared by polymer complex solution method.

Project description:Powders of Y2O3 co-doped with Yb3+ and Er3+ composed of well-crystallized nanoparticles (30 to 50 nm in diameter) with no adsorbed ligand species on their surface are prepared by polymer complex solution method. These powders exhibit up-conversion emission upon 978-nm excitation with a color that can be tuned from green to red by changing the Yb3+/Er3+ concentration ratio. The mechanism underlying up-conversion color changes is presented along with material structural and optical properties. PACS: 42.70.-a, 78.55.Hx, 78.60.-b.

| S-EPMC3765681 | biostudies-literature

Highly efficient up-conversion luminescence in Er3+/Yb3+ co-doped Na5Lu9F32 single crystals by vertical Bridgman method.

Project description:Er3+/Yb3+ co-doped Na5Lu9F32 single crystals with different concentrations of Yb3+ ions were prepared to investigate their phase structure, up-conversion (UC) properties and mechanism of UC luminescence by Bridgman method. Under 980 nm near-infrared (NIR) excitation, three sharp UC emission bands topping at green ~525 nm, ~548 nm and red ~669 nm were obtained in Er3+/Yb3+ doped Na5Lu9F32 single crystals which are attributing to the transitions of 2H11/2 → 4I15/2, 4S3/2 → 4I15/2 and 4F9/2 → 4I15/2, respectively. The quadratic dependence of pump power on UC emission indicated that two-photon process is in charge of the transition from excited state of Yb3+ ions to lower state of Er3+ ion in Na5Lu9F32 single crystals. The long-accepted mechanism for the production of red and green emissions through up-conversion (UC) under 980 nm excitation in Er3+/Yb3+ co-doped materials apply in the Na5Lu9F32 host was displayed. The enhancement of the red emission was observed due to a cross-relaxation (CR) process of the form: 4F7/2 + 4I11/2 → 4F9/2 + 4F9/2. Furthermore, an ideal yellowish green light performance could be achieved with 1.0 mol% Er3+ doped certain Yb3+ concentrations samples, and its external quantum efficiency approached to 6.80% under 5.5 Wcm-2 980 nm excitation which can be applied in developing UC displays for electro-optical devices.

| S-EPMC5562908 | biostudies-other

Control of Green and Red Upconversion in NaYF4:Yb3+,Er3+ Nanoparticles by Excitation Modulation.

Project description:Control of the two strongest upconversion emission lines in NaYF4:Yb3+, Er3+ nanoparticles is demonstrated by varying the excitation repetition rate. This technique may enable new multiplexed sensing modalities based on multicolor luminescent nanoparticles, currently contemplated for biomedical imaging and diagnostics.

| S-EPMC3587784 | biostudies-literature

Synthesis, Optical Properties, and Sensing Applications of LaF3:Yb3+/Er3+/Ho3+/Tm3+ Upconversion Nanoparticles.

Project description:Herein, we successfully synthesized a series of LaF3:Yb3+/Er3+/Ho3+/Tm3+ upconversion nanoparticles (UCNPs) and LaF3:Yb3+0.20, Er3+0.02@LaF3:Yb3+0.20 core/shell UCNPs by modifying the amount of NaOH and the reaction time. Hexagonal LaF3 nanocrystals with uniform particle sizes and bright UC emissions were obtained. The crystal structures of the lanthanide-doped LaF3 UCNPs were investigated using wide-angle X-ray diffraction. The morphologies and particle sizes of the nanocrystals were determined using transmission electron microscopy. The photoluminescence (PL) spectra of the LaF3 nanocrystals could be tuned by altering the doping ratio of Er3+, Ho3+, and Tm3+. In addition, the PL intensities increased after coating the UCNP cores with an active shell. The fluorescence intensities of the UCNPs synthesized via a one-hour reaction with the addition of 2.5 or 5 mmol NaOH increased by up to 17 times compared with the sample prepared without the addition of NaOH. By modifying the doping ratio of Yb/Tm, UV-emissive LaF3 nanocrystals were obtained. After surface modification by ligand exchange, the hydrophobic LaF3:Yb3+0.20, Er3+0.02@LaF3:Yb3+0.20 core/shell UCNPs became water-dispersible. These colloid UCNPs could be utilized as a fluorescent probe for the detection of Hg2+ ions under 980 nm near-infrared irradiation.

| S-EPMC7774313 | biostudies-literature

Synthesis of Small Ce3+-Er3+-Yb3+ Tri-Doped BaLuF? Active-Core-Active-Shell-Active-Shell Nanoparticles with Strong Down Conversion Luminescence at 1.5 ?m.

Project description:Small fluoride nanoparticles (NPs) with strong down-conversion (DC) luminescence at 1.5 ?m are quite desirable for optical fiber communication systems. Nevertheless, a problem exists regarding how to synthesize small fluoride NPs with strong DC emission at 1.5 ?m. Herein, we propose an approach to improve 1.5 ?m emission of BaLuF?:Yb3+,Er3+ NPs by way of combining doping Ce3+ ions and coating multiple BaLuF?: Yb3+ active-shells. We prepared the BaLuF?:18%Yb3+,2%Er3+,2%Ce3+ NPs through a high-boiling solvent method. The effect of Ce3+ concentration on the DC luminescence was systematically investigated in the BaLuF?:Yb3+,Er3+ NPs. Under a 980 nm laser excitation, the intensities of 1.53 ?m emission of BaLuF?:18%Yb3+,2%Er3+,2%Ce3+ NPs was enhanced by 2.6 times comparing to that of BaLuF?:18%Yb3+,2%Er3+ NPs since the energy transfer between Er3+ and Ce3+ ions: Er3+:?I11/2 (Er3+) + ²F5/2 (Ce3+) ? ?I13/2 (Er3+) + ²F7/2 (Ce3+). Then, we synthesized BaLuF?:18%Yb3+,2%Er3+,2%Ce3+@BaLuF?:5%Yb3+@BaLuF?:5%Yb3+ core-active-shell-active-shell NPs via a layer-by-layer strategy. After coating two BaLuF?:Yb3+ active-shell around BaLuF?:Yb3+,Er3+,Ce3+ NPs, the intensities of the 1.53 ?m emission was enhanced by 44 times compared to that of BaLuF?:Yb3+,Er3+ core NPs, since the active-shells could be used to not only suppress surface quenching but also to transfer the pump light to the core region efficiently through Yb3+ ions inside the active-shells.

| S-EPMC6116297 | biostudies-literature

Time-resolved universal temperature measurements using NaYF4:Er3+,Yb3+ upconverting nanoparticles in an electrospray jet.

Project description:Hexagonal upconverting nanoparticles (UCNPs) of NaYF4:Er3+,Yb3+ (ca. 300 nm) have been widely used to measure the temperature at the nanoscale using luminescence ratio thermometry. However, several factors limit their applications. For example, changes in the peak shape, mainly is the S-band emission, hinders their ability to be used as a universal temperature sensor. Herein, we introduce a universal calibration protocol for NaYF4:Er3+,Yb3+ upconverting nanoparticles that is robust to environmental changes and gives a precise temperature measurement. We used this new procedure to calculate the temperature profile inside a Taylor cone generated with an electrospray jet. Inside the Taylor cone the fluid velocity increases toward the tip of the cone. A constant acquisition length leads to a decrease in excitation and acquisition time. This decrease in excitation time causes a peak shape change that corrupts the temperature measurement if the entire peak shape is integrated in the calibration. Our universal calibration circumvents this problem and can be used for time-resolved applications. The temperature at the end of the Taylor cone increases due to the creation of a whispering gallery mode cavity with 980 nm excitation. We use time-resolved energy balance equations to support our optical temperature measurements inside the Taylor cone. We believe that the findings of this paper provide a foundation for time-resolved temperature measurements using NaYF4:Er3+,Yb3+ upconverting nanoparticles and can be used to understand temperature-dependent reactions such as protein unfolding inside microjet/microdroplets and microfluidic systems.

| S-EPMC6278772 | biostudies-literature

Substrate temperature dependence of structure and optical properties of ZnTiO3:Er3+/Yb3+ thin films synthesized by pulsed laser deposition

Project description:ZnTiO3:Er3+,Yb3+ thin film phosphors were successfully deposited by pulsed laser deposition (PLD) at different substrate temperatures. The distribution of the ions in the films was investigated and the chemical analysis showed that the doping ions were homogeneously distributed in the thin films. The optical response of the phosphors revealed that the reflectance percentages of the ZnTiO3:Er3+,Yb3+ vary with the silicon substrate temperature due to the differences in the thickness and morphological roughness of the thin films. Under 980 nm diode laser excitation, the ZnTiO3:Er3+,Yb3+ film phosphors displayed up-conversion emission from the Er3+ electronic transitions, with violet, blue, green, and red emission lines at 410, 480, 525, 545 and 660 nm from 2H9/2 → 4I15/2, 4F7/2 → 4I15/2, 2H11/2 → 4I15/2, 4S3/2 → 4I15/2 and 4F9/2 → 4I15/2 transitions, respectively. The up-conversion emission was enhanced by increasing the silico (Si) substrate temperature during the deposition. Based on the photoluminescence properties and decay lifetime analysis, the energy level diagram was established and the up-conversion energy-transfer mechanism was discussed in detail.

| S-EPMC10205636 | biostudies-literature

Lu3+/Yb3+ and Lu3+/Er3+ co-doped antimony selenide nanomaterials: synthesis, characterization, and electrical, thermoelectrical, and optical properties.

Project description:Lu3+/Yb3+ and Lu3+/Er3+ co-doped Sb2Se3 nanomaterials were synthesized by co-reduction method in hydrothermal condition. Powder X-ray diffraction patterns indicate that the LnxLn'xSb2-2xSe3 Ln: Lu3+/Yb3+ and Lu3+/Er3+ crystals (x = 0.00 - 0.04) are isostructural with Sb2Se3. The cell parameters were increased for compounds upon increasing the dopant content (x). Scanning electron microscopy and transmission electron microscopy images show that co-doping of Lu3+/Yb3+ ions in the lattice of Sb2Se3 produces nanorods, while that in Lu3+/Er3+ produces nanoparticles, respectively. The electrical conductivity of co-doped Sb2Se3 is higher than that of the pure Sb2Se3 and increases with temperature. By increasing the concentration of Ln3+ions, the absorption spectrum of Sb2Se3 shows red shifts and some intensity changes. In addition to the characteristic red emission peaks of Sb2Se3, emission spectra of co-doped materials show other emission bands originating from f-f transitions of the Yb3+ ions.

| S-EPMC3618067 | biostudies-literature

Toxicity Mechanism of Low Doses of NaGdF₄:Yb3+,Er3+ Upconverting Nanoparticles in Activated Macrophage Cell Lines.

Project description:Gadolinium-doped nanoparticles (NPs) are regarded as promising luminescent probes. In this report, we studied details of toxicity mechanism of low doses of NaGdF₄-based fluorescent nanoparticles in activated RAW264.7, J774A.1 macrophages. These cell lines were specifically sensitive to the treatment with nanoparticles. Using nanoparticles of three different sizes, but with a uniform zeta potential (about -11 mV), we observed rapid uptake of NPs by the cells, resulting in the increased lysosomal compartment and subsequent superoxide induction along with a decrease in mitochondrial potential, indicating the impairment of mitochondrial homeostasis. At the molecular level, this led to upregulation of proapoptotic Bax and downregulation of anti-apoptotic Bcl-2, which triggered the apoptosis with phosphatidylserine externalization, caspase-3 activation and DNA fragmentation. We provide a time frame of the toxicity process by presenting data from different time points. These effects were present regardless of the size of nanoparticles. Moreover, despite the stability of NaGdF₄ nanoparticles at low pH, we identified cell acidification as an essential prerequisite of cytotoxic reaction using acidification inhibitors (NH₄Cl or Bafilomycin A1). Therefore, approaching the evaluation of the biocompatibility of such materials, one should keep in mind that toxicity could be revealed only in specific cells. On the other hand, designing gadolinium-doped NPs with increased resistance to harsh conditions of activated macrophage phagolysosomes should prevent NP decomposition, concurrent gadolinium release, and thus the elimination of its toxicity.

| S-EPMC6359000 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data