Iris recognition using image moments and k-means algorithm.
Ontology highlight
ABSTRACT:
SUBMITTER: Khan YD
PROVIDER: S-EPMC3995185 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:One of the most famous algorithms that appeared in the area of image segmentation is the Fuzzy C-Means (FCM) algorithm. This algorithm has been used in many applications such as data analysis, pattern recognition, and image segmentation. It has the advantages of producing high quality segmentation compared to the other available algorithms. Many modifications have been made to the algorithm to improve its segmentation quality. The proposed segmentation algorithm in this paper is based on the Fuzzy C-Means algorithm adding the relational fuzzy notion and the wavelet transform to it so as to enhance its performance especially in the area of 2D gel images. Both proposed modifications aim to minimize the oversegmentation error incurred by previous algorithms. The experimental results of comparing both the Fuzzy C-Means (FCM) and the Wavelet Fuzzy C-Means (WFCM) to the proposed algorithm on real 2D gel images acquired from human leukemias, HL-60 cell lines, and fetal alcohol syndrome (FAS) demonstrate the improvement achieved by the proposed algorithm in overcoming the segmentation error. In addition, we investigate the effect of denoising on the three algorithms. This investigation proves that denoising the 2D gel image before segmentation can improve (in most of the cases) the quality of the segmentation.
| S-EPMC3794507 | biostudies-literature
Project description:Phenomics and chlorophyll fluorescence can help us to understand the various stresses a plant may undergo. In this research work, we observe the image-based morphological changes in the wheat canopy. These changes are monitored by capturing the maximum area of wheat canopy image that has maximum photosynthetic activity (chlorophyll fluorescence signals). The proposed algorithm presented here has three stages: (i) first, derivation of dynamic threshold value by curve fitting of data to eliminate the pixels of low-intensity value, (ii) second, extraction and segmentation of thresholded region by application of histogram-based K-means algorithm iteratively (this scheme of the algorithm is referred to as the curve fit K-means (CfitK-means) algorithm); and (iii) third, computation of 23 grey level cooccurrence matrix (GLCM) texture features (traits) from the wheat images has been done. These features help to do statistical analysis and infer agronomical insights. The analysis consists of correlation, factor, and agglomerative clustering to identify water stress indicators. A public repository of wheat canopy images was used that had normal and water stress response chlorophyll fluorescence images. The analysis of the feature dataset shows that all 23 features are proved fruitful in studying the changes in the shape and structure of wheat canopy due to water stress. The best segmentation algorithm was confirmed by doing exhaustive comparisons of seven segmentation algorithms. The comparisons showed that the best algorithm is CfitK-means as it has a maximum IoU score value of 95.75.
| S-EPMC8820929 | biostudies-literature
Project description:BACKGROUND:Evaluation of segmented colon is one of the challenges in Computed Tomography Colonography (CTC). The objective of the study was to measure the segmented colon accurately using image processing techniques. METHODS:This was a retrospective study, and the Institutional Ethical clearance was obtained for the secondary dataset. The technique was tested on 85 CTC dataset. The CTC dataset of 100-120 kVp, 100 mA, and ST (Slice Thickness) of 1.25 and 2.5 mm were used for empirical testing. The initial results of the work appear in the conference proceedings. Post colon segmentation, three distance measurement techniques, and one volumetric overlap computation were applied in Euclidian space in which the distances were measured on MPR views of the segmented and unsegmented colons and the volumetric overlap calculation between these two volumes. RESULTS:The key finding was that the measurements on both the segmented and the unsegmented volumes remain same without much difference noticed. This was statistically proved. The results were validated quantitatively on 2D MPR images. An accuracy of 95.265±0.4551% was achieved through volumetric overlap computation. Through pairedt-test, at ?=5%, statistical values were p=0.6769, and t=0.4169 which infer that there was no much significant difference. CONCLUSION:The combination of different validation techniques was applied to check the robustness of colon segmentation method, and good results were achieved with this approach. Through quantitative validation, the results were accepted at ?=5%.
| S-EPMC7090282 | biostudies-literature
Project description:The paper presents a new approach for medical image segmentation. Exudates are a visible sign of diabetic retinopathy that is the major reason of vision loss in patients with diabetes. If the exudates extend into the macular area, blindness may occur. Automated detection of exudates will assist ophthalmologists in early diagnosis. This segmentation process includes a new mechanism for clustering the elements of high-resolution images in order to improve precision and reduce computation time. The system applies K-means clustering to the image segmentation after getting optimized by Pillar algorithm; pillars are constructed in such a way that they can withstand the pressure. Improved pillar algorithm can optimize the K-means clustering for image segmentation in aspects of precision and computation time. This evaluates the proposed approach for image segmentation by comparing with Kmeans and Fuzzy C-means in a medical image. Using this method, identification of dark spot in the retina becomes easier and the proposed algorithm is applied on diabetic retinal images of all stages to identify hard and soft exudates, where the existing pillar K-means is more appropriate for brain MRI images. This proposed system help the doctors to identify the problem in the early stage and can suggest a better drug for preventing further retinal damage.
| S-EPMC3916816 | biostudies-other
Project description:Common leaf spot (caused by Pseudopeziza medicaginis), rust (caused by Uromyces striatus), Leptosphaerulina leaf spot (caused by Leptosphaerulina briosiana) and Cercospora leaf spot (caused by Cercospora medicaginis) are the four common types of alfalfa leaf diseases. Timely and accurate diagnoses of these diseases are critical for disease management, alfalfa quality control and the healthy development of the alfalfa industry. In this study, the identification and diagnosis of the four types of alfalfa leaf diseases were investigated using pattern recognition algorithms based on image-processing technology. A sub-image with one or multiple typical lesions was obtained by artificial cutting from each acquired digital disease image. Then the sub-images were segmented using twelve lesion segmentation methods integrated with clustering algorithms (including K_means clustering, fuzzy C-means clustering and K_median clustering) and supervised classification algorithms (including logistic regression analysis, Naive Bayes algorithm, classification and regression tree, and linear discriminant analysis). After a comprehensive comparison, the segmentation method integrating the K_median clustering algorithm and linear discriminant analysis was chosen to obtain lesion images. After the lesion segmentation using this method, a total of 129 texture, color and shape features were extracted from the lesion images. Based on the features selected using three methods (ReliefF, 1R and correlation-based feature selection), disease recognition models were built using three supervised learning methods, including the random forest, support vector machine (SVM) and K-nearest neighbor methods. A comparison of the recognition results of the models was conducted. The results showed that when the ReliefF method was used for feature selection, the SVM model built with the most important 45 features (selected from a total of 129 features) was the optimal model. For this SVM model, the recognition accuracies of the training set and the testing set were 97.64% and 94.74%, respectively. Semi-supervised models for disease recognition were built based on the 45 effective features that were used for building the optimal SVM model. For the optimal semi-supervised models built with three ratios of labeled to unlabeled samples in the training set, the recognition accuracies of the training set and the testing set were both approximately 80%. The results indicated that image recognition of the four alfalfa leaf diseases can be implemented with high accuracy. This study provides a feasible solution for lesion image segmentation and image recognition of alfalfa leaf disease.
| S-EPMC5158033 | biostudies-literature
Project description:The purposes are to monitor the nitrogen utilization efficiency of crops and intelligently evaluate the absorption of nutrients by crops during the production process. The research object is Chinese cabbage. The Chinese cabbage population with different agricultural parameters is constructed through different densities and nitrogen fertilizer application rates based on digital image processing technology, and an estimation NC (Nitrogen Content) model is established. The population is classified through the K-Means Clustering algorithm using the feature extraction method, and the Chinese cabbage population quality BPNN (Backpropagation Neural Network) model is constructed. The nonlinear mapping relationship between different agricultural parameters and population quality, and the contribution rate of each indicator, are studied. The nitrogen utilization of Chinese cabbage is monitored effectively. Results demonstrate that the proposed NC estimation model has correlation coefficients above 0.70 in different growth stages. This model can accurately estimate the NC of the Chinese cabbage population. The results of the Chinese cabbage population quality BPNN model show that the population planting density based on the seedling number is reasonable. The constructed population quality evaluation model has a high R2 value and a comparatively low RMSE (Root Mean Square Error) value for the quality evaluation of Chinese cabbage in different periods, showing that it applies to evaluate the population quality of Chinese cabbage in different growth stages. The constructed nitrogen utilization model and quality evaluation model can monitor the nutrient utilization of crops in different growth stages, ascertain the agricultural characteristics of other yield groups in different growth stages, and clarify the performance of agricultural parameters in different growth stages. The above results can provide some ideas for crop growth intelligent detection.
| S-EPMC8011815 | biostudies-literature
Project description:Emotions are a critical aspect of human behavior. One widely used technique for research in emotion measurement is based on the use of EEG signals. In general terms, the first step of signal processing is the elimination of noise, which can be done in manual or automatic terms. The next step is determining the feature vector using, for example, entropy calculation and its variations to generate a classification model. It is possible to use this approach to classify theoretical models such as the Circumplex model. This model proposes that emotions are distributed in a two-dimensional circular space. However, methods to determine the feature vector are highly susceptible to noise that may exist in the signal. In this article, a new method to adjust the classifier is proposed using metaheuristics based on the black hole algorithm. The method is aimed at obtaining results similar to those obtained with manual noise elimination methods. In order to evaluate the proposed method, the MAHNOB HCI Tagging Database was used. Results show that using the black hole algorithm to optimize the feature vector of the Support Vector Machine we obtained an accuracy of 92.56% over 30 executions.
| S-EPMC6016227 | biostudies-literature
Project description:With an increasing demand for stringent security systems, automated identification of individuals based on biometric methods has been a major focus of research and development over the last decade. Biometric recognition analyses unique physiological traits or behavioral characteristics, such as an iris, face, retina, voice, fingerprint, hand geometry, keystrokes or gait. The iris has a complex and unique structure that remains stable over a person's lifetime, features that have led to its increasing interest in its use for biometric recognition. In this study, we proposed a technique incorporating Principal Component Analysis (PCA) based on Discrete Wavelet Transformation (DWT) for the extraction of the optimum features of an iris and reducing the runtime needed for iris template classification. The idea of using DWT behind PCA is to reduce the resolution of the iris template. DWT converts an iris image into four frequency sub-bands. One frequency sub-band instead of four has been used for further feature extraction by using PCA. Our experimental evaluation demonstrates the efficient performance of the proposed technique.
| S-EPMC7924705 | biostudies-literature
Project description:Marine oil pollution poses a serious threat to the marine ecological balance. It is of great significance to develop rapid and efficient oil spill detection methods for the mitigation of marine oil spill pollution and the restoration of the marine ecological environment. X-band marine radar is one of the important monitoring devices, in this article, we perform the digital X-band radar image by "Sperry Marine" radar system for an oil film extraction experiment. First, the de-noised image was obtained by preprocessing the original image in the Cartesian coordinate system. Second, it was cut into slices. Third, the texture features of the slices were calculated based on the gray-level co-occurrence matrix (GLCM) and K-means method to extract the rough oil spill regions. Finally, the oil spill regions were segmented using the Sauvola threshold algorithm. The experimental results indicate that this study provides a scientific method for the research of oil film extraction. Compared with other methods of oil spill extraction in X-band single-polarization marine radar images, the proposed technology is more intelligent, and it can provide technical support for marine oil spill emergency response in the future.
| S-EPMC9680884 | biostudies-literature
Project description:Traditional k-means and most k-means variants are still computationally expensive for large datasets, such as microarray data, which have large datasets with large dimension size d. In k-means clustering, we are given a set of n data points in d-dimensional space R(d) and an integer k. The problem is to determine a set of k points in R(d), called centers, so as to minimize the mean squared distance from each data point to its nearest center. In this work, we develop a novel k-means algorithm, which is simple but more efficient than the traditional k-means and the recent enhanced k-means. Our new algorithm is based on the recently established relationship between principal component analysis and the k-means clustering. We provided the correctness proof for this algorithm. Results obtained from testing the algorithm on three biological data and six non-biological data (three of these data are real, while the other three are simulated) also indicate that our algorithm is empirically faster than other known k-means algorithms. We assessed the quality of our algorithm clusters against the clusters of a known structure using the Hubert-Arabie Adjusted Rand index (ARI(HA)). We found that when k is close to d, the quality is good (ARI(HA)>0.8) and when k is not close to d, the quality of our new k-means algorithm is excellent (ARI(HA)>0.9). In this paper, emphases are on the reduction of the time requirement of the k-means algorithm and its application to microarray data due to the desire to create a tool for clustering and malaria research. However, the new clustering algorithm can be used for other clustering needs as long as an appropriate measure of distance between the centroids and the members is used. This has been demonstrated in this work on six non-biological data.
| S-EPMC3519838 | biostudies-literature