Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Biosorption of hexavalent chromium from aqueous medium with Opuntia biomass.

ABSTRACT: The biosorption of hexavalent chromium from aqueous solutions by Opuntia cladodes and ectodermis from cactus fruits was investigated. Both types of biomass are considered low-cost, natural, and ecofriendly biosorbents. Batch experiments were carried out to determine Cr(VI) biosorption capacity and the efficiency of the biosorption process under different pH, initial Cr(VI) concentration, and sorbent dosage. The biosorption of Cr(VI) by Opuntia biomass was highly pH dependent, favoring higher metal uptake at low pH. The higher biosorption capacity was exhibited at pH 2. The optimal conditions were obtained at a sorbent dosage of 1 g L(-1) and initial metal concentration of 10 mg L(-1). Biosorption kinetic data were properly fitted with the pseudo-second-order kinetic model. The rate constant, the initial biosorption rate, and the equilibrium biosorption capacity were determined. The experimental equilibrium data obtained were analyzed using two-parameter isotherm models (Langmuir, Freundlich, and Temkin). The Langmuir maximum monolayer biosorption capacity (q max) was 18.5 mg g(-1) for cladodes and 16.4 mg g(-1) for ectodermis. The results suggest that Opuntia biomass could be considered a promising low-cost biosorbent for the ecofriendly removal of Cr(VI) from aqueous systems.

SUBMITTER: Fernandez-Lopez JA

PROVIDER: S-EPMC3997152 | biostudies-other | 2014

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Biomass waste-derived porous carbon efficient for simultaneous removal of chlortetracycline and hexavalent chromium.

Project description:The simultaneous removal of mixed containments of antibiotics and heavy metals is still a big challenge in wastewater treatment. Herein, we report the successful synthesis of N-doped porous carbon (abbreviated as NC) from straw waste through the Maillard reaction to activate sp3-sp2 conversion efficient for the simultaneous removal of chlortetracycline (CTC) and hexavalent chromium (Cr(VI)). In 200 min, 96.9% of Cr(VI) was reduced into Cr(III) and 93.1% of CTC was oxidatively degraded. Reactive substances (e.g., h+, e-1, ⋅OH, and ⋅O2 -) were verified for the photocatalytic reactions. Besides, the possible degradation intermediates of CTC were analyzed with ultra performance liquid chromatography-mass spectrometry (UPLC-MS/MS), and the mechanism of photocatalytic degradation of CTC was then proposed. The synthesized bifunctional NC materials could also be applied for the similar system; this will open the door for promising practical applications.

| S-EPMC8105648 | biostudies-literature

Ni-Fe/Reduced Graphene Oxide Nanocomposites for Hexavalent Chromium Reduction in an Aqueous Environment.

Project description:We designed and synthesized a novel high efficiency Cr(VI) removal material using reduced graphene oxide (RGO) as a support with high specific surface area and a mixture of Fe and Ni nanoparticles (NPs) as a catalytic reducing agent. Such a design enables the composite particle to be integrated with three functions of adsorption, catalysis, and reduction, where RGO could enhance Cr(VI) adsorption, while Fe/Ni NPs increase the catalytic reducing efficiency. The application of a microchip mixer guaranteed a better mixing of GO and subsequent decoration of Fe and Ni NPs on RGO. Cr(VI) removal experiments with various materials are performed, and the results demonstrated that the Ni-Fe/RGO achieved an adsorption capacity of 150.45 mg/g at pH = 7 and 197.43 mg/g at pH = 5 for Cr(VI), which is higher than those of other reported materials at a pH of ∼7. To the best of our knowledge, this is the first example of Ni-Fe/RGO for efficient Cr(VI) removal by using the synergistic effects of increased adsorption, catalysis-assisted reduction, and enhanced mixing effect of a microchip mixer. This work also provides us with a simple and low-cost method for the fabrication of an effective Cr(VI) removal material.

| S-EPMC8829916 | biostudies-literature

Experimental modeling and optimization for the reduction of hexavalent chromium in aqueous solutions using ascorbic acid.

Project description:In this study, we investigated the reduction of toxic Cr(VI) to less toxic Cr(III) using ascorbic acid in various aqueous solutions: deionized water, synthetic soft water, synthetic hard water, and real tap water. The experiments were performed using a statistical experimental design. Response surface methodology (RSM) was used to correlate Cr(VI) reduction (response variable) with experimental parameters such as initial Cr(VI) concentration, humic acid concentration, and ascorbic acid dosage. The empirical model obtained from the experiments was used to estimate and optimize the quantity of ascorbic acid required for the reduction of ≥ 99% Cr(VI) in water. The optimized dosages of ascorbic acid were predicted and experimentally validated for > 99.5% reduction of Cr(VI) (1, 10, 20, and 100 mg/L) in the solutions. Even a solution containing an initial Cr(VI) concentration of 100 mg/L was reduced in concentration ≥ 99.9% with optimal dosage of ascorbic acid (500 mg/L) in the presence of 20 mg/L humic acid. Moreover, the reaction kinetics (kobs-Cr(VI) = 0.71 mM-1 s-1) were sufficient to reduce the ≥ 99.9% Cr(VI) in 20 min. This study sheds new light on the effect of ascorbic acid on Cr(VI) reduction, and provides knowledge fundamental to optimize treatment of Cr(VI) contaminated water to environmentally acceptable endpoints.

| S-EPMC8222380 | biostudies-literature

Bioremediation of Hexavalent Chromium by Chromium Resistant Bacteria Reduces Phytotoxicity.

Project description:Chromium (Cr) (VI) has long been known as an environmental hazard that can be reduced from aqueous solutions through bioremediation by living cells. In this study, we investigated the efficiency of reduction and biosorption of Cr(VI) by chromate resistant bacteria isolated from tannery effluent. From 28 screened Cr(VI) resistant isolates, selected bacterial strain SH-1 was identified as Klebsiella sp. via 16S rRNA sequencing. In Luria-Bertani broth, the relative reduction level of Cr(VI) was 95%, but in tannery effluent, it was 63.08% after 72 h of incubation. The cell-free extract of SH-1 showed a 72.2% reduction of Cr(VI), which indicated a higher activity of Cr(VI) reducing enzyme than the control. Live and dead biomass of SH-1 adsorbed 51.25 mg and 29.03 mg Cr(VI) per gram of dry weight, respectively. Two adsorption isotherm models-Langmuir and Freundlich-were used for the illustration of Cr(VI) biosorption using SH-1 live biomass. Scanning electron microscopy (SEM) analysis showed an increased cell size of the treated biomass when compared to the controlled biomass, which supports the adsorption of reduced Cr on the biomass cell surface. Fourier-transform infrared analysis indicated that Cr(VI) had an effect on bacterial biomass, including quantitative and structural modifications. Moreover, the chickpea seed germination study showed beneficial environmental effects that suggest possible application of the isolate for the bioremediation of toxic Cr(VI).

| S-EPMC7504174 | biostudies-literature

Improved atmospheric sampling of hexavalent chromium.

Project description:Hexavalent chromium (Cr(VI)) and trivalent chromium (Cr(III)) are the primary chromium oxidation states found in ambient atmospheric particulate matter. While Cr(III) is relatively nontoxic, Cr(VI) is toxic and exposure to Cr(VI) may lead to cancer, nasal damage, asthma, bronchitis, and pneumonitis. Accurate measurement of the ambient Cr(VI) concentrations is an environmental challenge since Cr(VI) can be reduced to Cr(III) and vice versa during sampling. In the present study, a new Cr(VI) sampler (Clarkson sampler) was designed, constructed, and field tested to improve the sampling of Cr(VI) in ambient air. The new Clarkson Cr(VI) sampler was based on the concept that deliquescence during sampling leads to aqueous phase reactions. Thus, the relative humidity of the sampled air was reduced below the deliquescence relative humidity (DRH) of the ambient particles. The new sampler was operated to collect total suspended particles (TSP), and compared side-by-side with the current National Air Toxics Trends Stations (NATTS) Cr(VI) sampler that is utilized in the US. Environmental Protection Agency (EPA) air toxics monitoring program. Side-by-side field testing of the samplers occurred in Elizabeth, NJ during the winter and summer of 2012. The average recovery values of Cr(VI) spikes after 24-hr sampling intervals during summer and winter sampling were 57 and 72%, respectively, for the Clarkson sampler while the corresponding average values for NATTS samplers were 46% for both summer and winter sampling, respectively. Preventing the ambient aerosol collected on the filters from deliquescing is a key to improving the sampling of Cr(VI).

| S-EPMC4406252 | biostudies-literature

Highly dispersed and stable nano zero-valent iron doped electrospun carbon nanofiber composite for aqueous hexavalent chromium removal.

Project description:In this work, a nZVI doped electrospun carbon nanofiber (nZVI-CNF) composite was prepared and applied for aqueous hexavalent chromium (Cr(vi)) removal. Firstly, FeCl3/PAN nanofibers were prepared by a simple electrospinning method; Then, nZVI-CNFs were obtained by carbonization of FeCl3/PAN nanofibers at 800 °C. The surface morphology and internal structure of nZVI-CNFs were characterized by SEM and TEM, showing that the uniformly dispersed nZVI particles were well integrated into the carbon layer structure. The Cr(vi) removal efficiency of nZVI-CNFs was 91.5% with a Cr(vi) concentration of 10 mg L-1 and the mechanism was further studied by XRD and XPS. Meanwhile, the nZVI-CNFs exhibited good stability over a wide range of pH values from 4-8 and a long time placement stability. Furthermore, nZVI-CNFs can be used as a filter membrane for continuous treatment of wastewater, suggesting great potential for practical application.

| S-EPMC8982355 | biostudies-literature

Self-assembly modified-mushroom nanocomposite for rapid removal of hexavalent chromium from aqueous solution with bubbling fluidized bed.

Project description:A self-assembled modified Pleurotus Cornucopiae material (SMPM) combined with improved Intermittent Bubbling Fluidized Bed (IBFB) was investigated to remove the hexavalent chromium ions in aqueous solution. After the modification, the powder-like raw material gradually self-assembled together to SMPM, which had crinkly porous structure, improved the Cr-accommodation ability in a sound manner. Optimized by Taguchi method, Cr(VI) removal efficiency was up to 75.91% and 48.01% for 100 mg/L and 500 mg/L initial concentration of Cr(VI), respectively. Results indicated that the metal removal was dependent on dosage of adsorbent, particle diameter and treatment time. The experimental data obtained from the biosorption process was successfully correlated with Freundlich isotherm model. Thermodynamic study indicated the endothermic nature of the process. The results confirmed that self-assembly modified Pleurotus Cornucopiae material could be applied for the removal of heavy metal from wastewater in continuous fluidized bed process.

| S-EPMC4870617 | biostudies-other

Removal of hexavalent chromium from aqueous solution by fabricating novel heteroaggregates of montmorillonite microparticles with nanoscale zero-valent iron.

Project description:This study fabricated novel heteroaggregates of montmorillonite (Mt) microparticles with nanoscale zero-valent iron (nZVI) (Mt-nZVI) and examined the removal of Cr(VI) by the Mt-nZVI through batch experiments. Spherical nZVI particles were synthesized by the liquid phase reduction method, which were then attached on the flat Mt surfaces in monolayer. The fabricated Mt-nZVI had similar removal efficiency for Cr(VI) compared to the monodispersed nZVI particles, but was much greater than that of nZVI aggregates. The removal efficiency of Mt-nZVI increased with decreasing its dosage and increasing initial Cr(VI) concentration, whereas had insignificant change with solution pH. The removal of Cr(VI) by Mt-nZVI was well described by the pseudo second-order kinetics and the Langmuir equilibrium model. The removal was spontaneous and exothermic, which was mainly due to chemsorption rather than intra-particle diffusion according to calculation of change in free energy and enthalpy and Weber-Morris model simulations. X-ray diffraction and X-ray photoelectron spectroscopy analysis revealed that the adsorption was likely due to reduction of Cr(VI) to Cr(III) by Fe(0) and co-precipitation in the form of oxide-hydroxide of Fe(III) and Cr(III). The fabricated Mt-nZVI showed the promise for in-situ soil remediation due to both high removal efficiency and great mobility in porous media.

| S-EPMC7376241 | biostudies-literature

Phytofabrication of Iron Nanoparticles for Hexavalent Chromium Remediation.

Project description:Hexavalent chromium is a genotoxic and carcinogenic byproduct of a number of industrial processes, which is discharged into the environment in excessive and toxic concentrations worldwide. In this paper, the synthesis of green iron oxide nanoparticles using extracts of four novel plant species [Pittosporum undulatum, Melia azedarach, Schinus molle, and Syzygium paniculatum (var. australe)] using a "bottom-up approach" has been implemented for hexavalent chromium remediation. Nanoparticle characterizations show that different plant extracts lead to the formation of nanoparticles with different sizes, agglomeration tendencies, and shapes but similar amorphous nature and elemental makeup. Hexavalent chromium removal is linked with the particle size and monodispersity. Nanoparticles with sizes between 5 and 15 nm from M. azedarach and P. undulatum showed enhanced chromium removal capacities (84.1-96.2%, respectively) when compared to the agglomerated particles of S. molle and S. paniculatum with sizes between 30 and 100 nm (43.7-58.7%, respectively) in over 9 h. This study has shown that the reduction of iron salts with plant extracts is unlikely to generate vast quantities of stable zero valent iron nanoparticles but rather favor the formation of iron oxide nanoparticles. In addition, plant extracts with higher antioxidant concentrations may not produce nanoparticles with morphologies optimal for pollutant remediation.

| S-EPMC6199743 | biostudies-literature

Reduction of hexavalent chromium by Ochrobactrum intermedium BCR400 isolated from a chromium-contaminated soil.

Project description:Hexavalent chromium-resistant Ochrobactrum intermedium BCR400 was isolated from chromium contaminated soil collected from Vadodara, Gujarat. It reduced 100 mg Cr(VI)/L completely in 52 h with initial Cr(VI) reduction rate of 1.98 mg/L/h. The Cr(VI) reduction rate decreased with increase in Cr(VI) concentration from 100 to 500 mg/L. The addition of anthraquinone-2-sulphonic acid (AQS) to culture O. intermedium BCR400 significantly enhanced its chromium reduction rate. The activation energy of AQS-mediated Cr(VI) reduction (120.69 KJ/mol) was 1.1-fold lower than non-mediated Cr(VI) reduction. An increase in the activities of quinone reductase and chromate reductase in cells grown in presence of AQS/AQS + Cr(VI) suggests their role in reduction of Cr(VI) by O. intermedium. Both chromate reductase and quinone reductase activities were FAD independent, required NADH as reductant, displayed maximum activity at pH (7.0) and temperature (30 °C). Thus Cr(VI) bioremediation potential of O. intermedium can be enhanced by augmentation of system with AQS as redox mediator.

| S-EPMC3339614 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data