Role of microstructures on the M1-M2 phase transition in epitaxial VO2 thin films.
Ontology highlight
ABSTRACT:
SUBMITTER: Ji Y
PROVIDER: S-EPMC4010922 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Plasmonic and metamaterial based nano/micro-structured materials enable spectrally selective resonant absorption, where the resonant bandwidth and absorption intensity can be engineered by controlling the size and geometry of nanostructures. Here, we demonstrate a simple, lithography-free approach for obtaining a resonant and dynamically tunable broadband absorber based on vanadium dioxide (VO2) phase transition. Using planar layered thin film structures, where top layer is chosen to be an ultrathin (20 nm) VO2 film, we demonstrate broadband IR light absorption tuning (from ~90% to ~30% in measured absorption) over the entire mid-wavelength infrared spectrum. Our numerical and experimental results indicate that the bandwidth of the absorption bands can be controlled by changing the dielectric spacer layer thickness. Broadband tunable absorbers can find applications in absorption filters, thermal emitters, thermophotovoltaics and sensing.
| S-EPMC4543955 | biostudies-literature
Project description:Mechanism of metal-insulator transition (MIT) in strained VO2 thin films is very complicated and incompletely understood despite three scenarios with potential explanations including electronic correlation (Mott mechanism), structural transformation (Peierls theory) and collaborative Mott-Peierls transition. Herein, we have decoupled coactions of structural and electronic phase transitions across the MIT by implementing epitaxial strain on 13-nm-thick (001)-VO2 films in comparison to thicker films. The structural evolution during MIT characterized by temperature-dependent synchrotron radiation high-resolution X-ray diffraction reciprocal space mapping and Raman spectroscopy suggested that the structural phase transition in the temperature range of vicinity of the MIT is suppressed by epitaxial strain. Furthermore, temperature-dependent Ultraviolet Photoelectron Spectroscopy (UPS) revealed the changes in electron occupancy near the Fermi energy EF of V 3d orbital, implying that the electronic transition triggers the MIT in the strained films. Thus the MIT in the bi-axially strained VO2 thin films should be only driven by electronic transition without assistance of structural phase transition. Density functional theoretical calculations further confirmed that the tetragonal phase across the MIT can be both in insulating and metallic states in the strained (001)-VO2/TiO2 thin films. This work offers a better understanding of the mechanism of MIT in the strained VO2 films.
| S-EPMC4792152 | biostudies-literature
Project description:The VO? thin films with sharp metal?insulator transition (MIT) were epitaxially grown on (001)-oriented Yttria-stabilized zirconia substrates (YSZ) using radio-frequency (RF) magnetron sputtering techniques. The MIT and structural phase transition (SPT) were comprehensively investigated under in situ temperature conditions. The amplitude of MIT is in the order of magnitude of 10?, and critical temperature is 342 K during the heating cycle. It is interesting that both electron concentration and mobility are changed by two orders of magnitude across the MIT. This research is distinctively different from previous studies, which found that the electron concentration solely contributes to the amplitude of the MIT, although the electron mobility does not. Analysis of the SPT showed that the (010)-VO?/(001)-YSZ epitaxial thin film presents a special multi-domain structure, which is probably due to the symmetry matching and lattice mismatch between the VO? and YSZ substrate. The VO? film experiences the SPT from the M1 phase at low temperature to a rutile phase at a high temperature. Moreover, the SPT occurs at the same critical temperature as that of the MIT. This work may shed light on a new MIT behavior and may potentially pave the way for preparing high-quality VO? thin films on cost-effective YSZ substrates for photoelectronic applications.
| S-EPMC6163228 | biostudies-literature
Project description:Vanadium has 11 oxide phases, with the binary VO2 presenting stimuli-dependent phase transitions that manifest as switchable electronic and optical features. An elevated temperature induces an insulator-to-metal transition (IMT) as the crystal reorients from a monoclinic state (insulator) to a tetragonal arrangement (metallic). This transition is accompanied by a simultaneous change in optical properties making VO2 a versatile optoelectronic material. However, its deployment in scalable devices suffers because of the requirement of specialised substrates to retain the functionality of the material. Sensitivity to oxygen concentration and larger-scale VO2 synthesis have also been standing issues in VO2 fabrication. Here, we address these major challenges in harnessing the functionality in VO2 by demonstrating an approach that enables crystalline, switchable VO2 on any substrate. Glass, silicon, and quartz are used as model platforms to show the effectiveness of the process. Temperature-dependent electrical and optical characterisation is used demonstrating three to four orders of magnitude in resistive switching, >60% chromic discrimination at infrared wavelengths, and terahertz property extraction. This capability will significantly broaden the horizon of applications that have been envisioned but remained unrealised due to the lack of ability to realise VO2 on any substrate, thereby exploiting its untapped potential.
| S-EPMC5738395 | biostudies-literature
Project description:We present a spectroscopic ellipsometry study of Mo-doped VO2 thin films deposited on silicon substrates for the mid-infrared range. The dielectric functions and conductivity were extracted from analytical fittings of ? and ? ellipsometric angles showing a strong dependence on the dopant concentration and the temperature. Insulator-to-metal transition (IMT) temperature is found to decrease linearly with increasing doping level. A correction to the classical Drude model (termed Drude-Smith) has been shown to provide excellent fits to the experimental measurements of dielectric constants of doped/undoped films and the extracted parameters offer an adequate explanation for the IMT based on the carriers backscattering across the percolation transition. The smoother IMT observed in the hysteresis loops as the doping concentration is increased, is explained by charge density accumulation, which we quantify through the integral of optical conductivity. In addition, we describe the physics behind a localized Fano resonance that has not yet been demonstrated and explained in the literature for doped/undoped VO2 films.
| S-EPMC7244498 | biostudies-literature
Project description:Control over the concurrent occurrence of structural (monoclinic to tetragonal) and electrical (insulator to the conductor) transitions presents a formidable challenge for VO2-based thin film devices. Speed, lifetime, and reliability of these devices can be significantly improved by utilizing solely electrical transition while eliminating structural transition. We design a novel strain-stabilized isostructural VO2 epitaxial thin-film system where the electrical transition occurs without any observable structural transition. The thin-film heterostructures with a completely relaxed NiO buffer layer have been synthesized allowing complete control over strains in VO2 films. The strain trapping in VO2 thin films occurs below a critical thickness by arresting the formation of misfit dislocations. We discover the structural pinning of the monoclinic phase in (10 ± 1 nm) epitaxial VO2 films due to bandgap changes throughout the whole temperature regime as the insulator-to-metal transition occurs. Using density functional theory, we calculate that the strain in monoclinic structure reduces the difference between long and short V-V bond-lengths (ΔV-V) in monoclinic structures which leads to a systematic decrease in the electronic bandgap of VO2. This decrease in bandgap is additionally attributed to ferromagnetic ordering in the monoclinic phase to facilitate a Mott insulator without going through the structural transition.
| S-EPMC6395818 | biostudies-literature
Project description:Since the first observation of the metal-to-insulator transition (MIT), VO2 has attracted substantial attention in terms of whether this transition is impelled by electron-phonon interaction (Peierls transition) or electron-electron interaction. Regarding Peierls transition, it has been theoretically predicted that the Fermi surface (FS) cross-section exhibits certain nesting features for a metallic phase of VO2. Various experimental studies related to the nesting feature have been reported. Nevertheless, there is no experimental result on FS topology. In this work, we determine the FS topology of the metallic phase of VO2 through studies of VO2 epitaxial thin films on TiO2(001) substrates, using synchrotron radiation angle-resolved photoemission spectroscopy (ARPES). Three electron pockets around ? are observed in band structures along the ?-X direction. These three bands form electron surfaces around ? in the ?XRZ plane. Furthermore, the lowest energy band FS exhibits the nesting feature corresponding to a nesting vector [Formula: see text]?=??R, as predicted by the calculation. Our results strongly indicate the formation of the charge-density wave with [Formula: see text]?=??R and thus, the importance of Peierls transition for the mechanism of the MIT in VO2.
| S-EPMC6297140 | biostudies-literature
Project description:In this study, we report about the occurrence of phase separation through spinodal decomposition (SD) in spinel manganese ferrite (Mn ferrite) thin films grown by Dynamic Aurora pulsed laser deposition. The driving force behind this SD in Mn ferrite films is considered to be an ion-impingement-enhanced diffusion that is induced by the application of magnetic field during film growth. The phase separation to Mn-rich and Fe-rich phases in Mn ferrite films is confirmed from the Bragg's peak splitting and the appearance of the patterned checkerboard-like domain in the surface. In the cross-sectional microstructure analysis, the distribution of Mn and Fe-signals alternately changes along the lateral (x and y) directions, while it is almost homogeneous in the z-direction. The result suggests that columnar-type phase separation occurs by the up-hill diffusion only along the in-plane directions. The propagation of a quasi-sinusoidal compositional wave in the lateral directions is confirmed from spatially resolved chemical composition analysis, which strongly demonstrates the occurrence of phase separation via SD. It is also found that the composition of Mn-rich and Fe-rich phases in phase-separated Mn ferrite thin films deposited at higher growth temperature and in situ magnetic field does not depend on the corresponding average film composition.
| S-EPMC6041787 | biostudies-literature
Project description:The transfer process of graphene onto the surface of oxide substrates is well known. However, for many devices, we require high quality oxide thin films on the surface of graphene. This step is not understood. It is not clear why the oxide should adopt the epitaxy of the underlying oxide layer when it is deposited on graphene where there is no lattice match. To date there has been no explanation or suggestion of mechanisms which clarify this step. Here we show a mechanism, supported by first principles simulation and structural characterisation results, for the growth of oxide thin films on graphene. We describe the growth of epitaxial SrTiO3 (STO) thin films on a graphene and show that local defects in the graphene layer (e.g. grain boundaries) act as bridge-pillar spots that enable the epitaxial growth of STO thin films on the surface of the graphene layer. This study, and in particular the suggestion of a mechanism for epitaxial growth of oxides on graphene, offers new directions to exploit the development of oxide/graphene multilayer structures and devices.
| S-EPMC4981861 | biostudies-literature
Project description:Transition metal oxides offer functional properties beyond conventional semiconductors. Bridging the gap between the fundamental research frontier in oxide electronics and their realization in commercial devices demands a wafer-scale growth approach for high-quality transition metal oxide thin films. Such a method requires excellent control over the transition metal valence state to avoid performance deterioration, which has been proved challenging. Here we present a scalable growth approach that enables a precise valence state control. By creating an oxygen activity gradient across the wafer, a continuous valence state library is established to directly identify the optimal growth condition. Single-crystalline VO2 thin films have been grown on wafer scale, exhibiting more than four orders of magnitude change in resistivity across the metal-to-insulator transition. It is demonstrated that 'electronic grade' transition metal oxide films can be realized on a large scale using a combinatorial growth approach, which can be extended to other multivalent oxide systems.
| S-EPMC4633718 | biostudies-literature