Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Microfluidic dielectrophoretic sorter using gel vertical electrodes.

ABSTRACT: We report the development and results of a two-step method for sorting cells and small particles in a microfluidic device. This approach uses a single microfluidic channel that has (1) a microfabricated sieve which efficiently focuses particles into a thin stream, followed by (2) a dielectrophoresis (DEP) section consisting of electrodes along the channel walls for efficient continuous sorting based on dielectric properties of the particles. For our demonstration, the device was constructed of polydimethylsiloxane, bonded to a glass surface, and conductive agarose gel electrodes. Gold traces were used to make electrical connections to the conductive gel. The device had several novel features that aided performance of the sorting. These included a sieving structure that performed continuous displacement of particles into a single stream within the microfluidic channel (improving the performance of downstream DEP, and avoiding the need for additional focusing flow inlets), and DEP electrodes that were the full height of the microfluidic walls ("vertical electrodes"), allowing for improved formation and control of electric field gradients in the microfluidic device. The device was used to sort polymer particles and HeLa cells, demonstrating that this unique combination provides improved capability for continuous DEP sorting of particles in a microfluidic device.

SUBMITTER: Luo J

PROVIDER: S-EPMC4032422 | biostudies-other | 2014 May

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Non-Linear Cellular Dielectrophoretic Behavior Characterization Using Dielectrophoretic Tweezers-Based Force Spectroscopy inside a Microfluidic Device.

Project description:Characterization of cellular dielectrophoretic (DEP) behaviors, when cells are exposed to an alternating current (AC) electric field of varying frequency, is fundamentally important to many applications using dielectrophoresis. However, to date, that characterization has been performed with monotonically increasing or decreasing frequency, not with successive increases and decreases, even though cells might behave differently with those frequency modulations due to the nonlinear cellular electrodynamic responses reported in previous works. In this report, we present a method to trace the behaviors of numerous cells simultaneously at the single-cell level in a simple, robust manner using dielectrophoretic tweezers-based force spectroscopy. Using this method, the behaviors of more than 150 cells were traced in a single environment at the same time, while a modulated DEP force acted upon them, resulting in characterization of nonlinear DEP cellular behaviors and generation of different cross-over frequencies in living cells by modulating the DEP force. This study demonstrated that living cells can have non-linear di-polarized responses depending on the modulation direction of the applied frequency as well as providing a simple and reliable platform from which to measure a cellular cross-over frequency and characterize its nonlinear property.

| S-EPMC6210972 | biostudies-literature

Dielectrophoretic Separation of Live and Dead Monocytes Using 3D Carbon-Electrodes.

Project description:Blood has been the most reliable body fluid commonly used for the diagnosis of diseases. Although there have been promising investigations for the development of novel lab-on-a-chip devices to utilize other body fluids such as urine and sweat samples in diagnosis, their stability remains a problem that limits the reliability and accuracy of readouts. Hence, accurate and quantitative separation and characterization of blood cells are still crucial. The first step in achieving high-resolution characteristics for specific cell subpopulations from the whole blood is the isolation of pure cell populations from a mixture of cell suspensions. Second, live cells need to be purified from dead cells; otherwise, dead cells might introduce biases in the measurements. In addition, the separation and characterization methods being used must preserve the genetic and phenotypic properties of the cells. Among the characterization and separation approaches, dielectrophoresis (DEP) is one of the oldest and most efficient label-free quantification methods, which directly purifies and characterizes cells using their intrinsic, physical properties. In this study, we present the dielectrophoretic separation and characterization of live and dead monocytes using 3D carbon-electrodes. Our approach successfully removed the dead monocytes while preserving the viability of the live monocytes. Therefore, when blood analyses and disease diagnosis are performed with enriched, live monocyte populations, this approach will reduce the dead-cell contamination risk and achieve more reliable and accurate test results.

| S-EPMC5713632 | biostudies-literature

Analysis of pairwise cell interactions using an integrated dielectrophoretic-microfluidic system.

Project description:Blood vessel formation, during either normal vascular reconstruction or pathogenic tumour formation, relies upon highly organized cell-cell interactions. Isolating the function of any particular component of this cell-cell communication is often difficult, given the vast complexity of communication networks in multicellular systems. One way to address this problem is to analyse cell-cell communication on the most elementary scale--cell pairs. Here, we describe an integrated dielectrophoretic (DEP)-microfluidic device allowing for such analysis. Single cancer and endothelial cells (ECs) and cell pairs were patterned using DEP force and cultured within a minimally stressful microfluidic channel network. Controlling both the initial cell positions and extracellular environment, we investigated cell motility in homo- and heterotypic cell pairs under diverse conditions. We found that secreted collagen IV and soluble vascular endothelial growth factor have considerable guidance effect on ECs at the level of two interacting cells. Cell interaction rules extracted from the experiments of cell pairs were used to mathematically predict branching patterns characteristic of developing multicellular blood vessels. This integrative analysis method can be extended to other systems involving complex multicellular interactions.

| S-EPMC2615303 | biostudies-literature

Automated measurement of cell mechanical properties using an integrated dielectrophoretic microfluidic device.

Project description:Cell mechanics is closely related to and interacts with cellular functions, which has the potential to be an effective biomarker to indicate disease onset and progression. Although several techniques have been developed for measuring cell mechanical properties, the issues of limited measurement data and biological significance because of complex and labor-intensive manipulation remain to be addressed, especially for the dielectrophoresis-based approach that is difficult to utilize flow measurement techniques. In this work, a dielectrophoresis-based solution is proposed to automatically obtain mass cellular mechanical data by combining a designed microfluidic device integrated the functions of cell capture, dielectrophoretic stretching, and cell release and an automatic control scheme. Experiments using human umbilical vein endothelial cells and breast cells revealed the automation capability of this device. The proposed method provides an effective way to address the low-throughput problem of dielectrophoresis-based cell mechanical property measurements, which enhance the biostatistical significance for cellular mechanism studies.

| S-EPMC9114521 | biostudies-literature

Enrichment of bovine X-sperm using microfluidic dielectrophoretic chip: A proof-of- concept study.

Project description:The microfluidic dielectrophoretic (MF-DEP) chip is a new, economical and readily-available technology that might be used to enrich X-sperm for increasing female offspring in dairy farms. In this study, we sought to develop an MF-DEP chip to enrich X bovine sperm. The MF-DEP chip was composed of an electrode attached to a glass slide and a microchannel made from polydimethylsiloxane. Sex-sorted sperm from flow cytometry were used to identify optimal electric field conditions while unsorted sperm were later tested for sorting efficiency. The results show that during dielectrophoresis some sperm attached to the electrode (called positive DEP; pDEP) whereas other moved away from the electrode (called negative DEP; nDEP). X and Y-sperm responded to dielectrophoresis differently depending on various factors such as buffers, voltages, and frequencies. We found that the condition 4 V 1 MHz significantly reduced (P < 0.05) the percentage of Y-sperm to nearly 30 and therefore enriched X-sperm. The sorting efficiency was dependent on buffer, bull, sorting cycle, flow rate, electrical voltage, and frequency. Notably, the best sorting buffer found in this experiment was the conducting buffer, but this buffer significantly reduced sperm viability and motility. Other sperm-friendly buffers, TRIS and mHTF, were also used, but could not enrich X-sperm. In conclusion, this is a proof of concept that the MF-DEP chip can be effectively used to enrich bovine X-sperm. However, more research must be performed particularly to find the best sorting buffer to effectively sex-sort sperm while providing high motility and sperm viability.

| S-EPMC7672294 | biostudies-literature

AC-dielectrophoretic characterization and separation of submicron and micron particles using sidewall AgPDMS electrodes.

Project description:The recent development of microfluidic "lab on a chip" devices requires the need to continuously separate submicron particles. Here, we present a PDMS microfluidic device with sidewall conducting PDMS (AgPDMS) composite electrodes capable of separating submicron particles in hydrodynamic flow. In particular, the device can service dual functions. First, the AgPDMS composite electrodes embedded in a sidewall of the device channel allow for performing AC-dielectrophoretic (DEP) characterization through direct microscopic observation of particle behavior. Characterization experiments are carried out for numerous parameters including particle size, medium conductivity, and AC field frequency to reveal important dielectrophoresis DEP information in terms of the crossover frequency and positive/negative DEP behavior under specific frequencies. Second, the device offers an advantage that sidewall AgPDMS composite electrodes can produce strong DEP effects throughout the entire channel height, and thus the robustness of the on-chip particle separation is demonstrated for continuous separation in a flowing mixture of 0.5 and 5 μm particles with 100% separation efficiency.

| S-EPMC3365326 | biostudies-other

A High-Throughput Microfluidic Cell Sorter Using a Three-Dimensional Coupled Hydrodynamic-Dielectrophoretic Pre-Focusing Module.

Project description:Dielectrophoresis (DEP) is a powerful tool for label-free sorting of cells, even those with subtle differences in morphological and dielectric properties. Nevertheless, a major limitation is that most existing DEP techniques can efficiently sort cells only at low throughputs (<1 mL h-1). Here, we demonstrate that the integration of a three-dimensional (3D) coupled hydrodynamic-DEP cell pre-focusing module upstream of the main DEP sorting region enables cell sorting with a 10-fold increase in throughput compared to conventional DEP approaches. To better understand the key principles and requirements for high-throughput cell separation, we present a comprehensive theoretical model to study the scaling of hydrodynamic and electrostatic forces on cells at high flow rate regimes. Based on the model, we show that the critical cell-to-electrode distance needs to be ≤10 µm for efficient cell sorting in our proposed microfluidic platform, especially at flow rates ≥ 1 mL h-1. Based on those findings, a computational fluid dynamics model and particle tracking analysis were developed to find optimum operation parameters (e.g., flow rate ratios and electric fields) of the coupled hydrodynamic-DEP 3D focusing module. Using these optimum parameters, we experimentally demonstrate live/dead K562 cell sorting at rates as high as 10 mL h-1 (>150,000 cells min-1) with 90% separation purity, 85% cell recovery, and no negative impact on cell viability.

| S-EPMC10609158 | biostudies-literature

Conducting polymer electrodes for gel electrophoresis.

Project description:In nearly all cases, electrophoresis in gels is driven via the electrolysis of water at the electrodes, where the process consumes water and produces electrochemical by-products. We have previously demonstrated that ?-conjugated polymers such as poly(3,4-ethylenedioxythiophene) (PEDOT) can be placed between traditional metal electrodes and an electrolyte to mitigate electrolysis in liquid (capillary electroosmosis/electrophoresis) systems. In this report, we extend our previous result to gel electrophoresis, and show that electrodes containing PEDOT can be used with a commercial polyacrylamide gel electrophoresis system with minimal impact to the resulting gel image or the ionic transport measured during a separation.

| S-EPMC3929695 | biostudies-literature

Development of a conductivity-based photothermal absorbance detection microchip using polyelectrolytic gel electrodes.

Project description:The development and application of polyelectrolytic gel electrodes (PGEs) for a microfluidic photothermal absorbance detection system is described. The PGEs are used to measure changes in conductivity based on heat generation by analytes absorbing light and changing the solution viscosity. The PGEs are suitable for direct contact conductivity measurements since they do not degrade with exposure to high electric fields. Both a 2-electrode system with DC voltages and a 3-electrode system with AC voltages were investigated. Experimental factors including excitation voltage, excitation frequency, laser modulation frequency, laser power, and path length were tested. The limits of detection for the 3-electrode and 2-electrode systems are 500nM and 0.55nM for DABSYL-tagged glucosamine, respectively. In addition, an electrokinetic separation of a potassium, DABSYL-tagged glucosamine, Rhodamine 6G, and Rhodamine B mixture was demonstrated.

| S-EPMC5675820 | biostudies-literature

Selective retrieval of individual cells from microfluidic arrays combining dielectrophoretic force and directed hydrodynamic flow

Project description:Hydrodynamic-based microfluidic platforms enable single-cell arraying and analysis over time. Despite the advantages of established microfluidic systems, long term analysis and proliferation of cells selected in such devices require off-chip recovery of cells as well as an investigation of on-chip analysis on cell phenotype; requirements still largely unmet. Here, we introduce a device for single-cell isolation, selective retrieval and off-chip recovery. To this end, singularly addressable three-dimensional electrodes are embedded within a microfluidic channel, allowing, through application of a negative dielectrophoretic (DEP) force, the selective release of single cells from their trapping site. Selective capture and release is carried out in standard culture medium and cells can be subsequently single cell mitigated towards a recovery well using hybrid SU-8/PDMS pneumatic valves. Importantly, transcriptional analysis of recovered cells revealed only marginal alteration of the molecular profile upon DEP application, underscored by equivocal minor transcriptional changes induced upon injection into the microfluidics device. Therefore, the established microfluidic system combining targeted DEP manipulation with down-stream hydrodynamic coordination of single cells, provides the means to handle and manipulate individual cells within one device.

2020-04-09 | GSE143190 | GEO

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data