Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A color gamut description algorithm for liquid crystal displays in CIELAB space.

ABSTRACT: Because the accuracy of gamut boundary description is significant for gamut mapping process, a gamut boundary calculating method for LCD monitors is proposed in this paper. Within most of the previous gamut boundary calculation algorithms, the gamut boundary is calculated in CIELAB space directly, and part of inside-gamut points are mistaken for the boundary points. While, in the new proposed algorithm, the points on the surface of RGB cube are selected as the boundary points, and then converted and described in CIELAB color space. Thus, in our algorithm, the true gamut boundary points are found and a more accurate gamut boundary is described. In experiment, a Toshiba LCD monitor's 3D CIELAB gamut for evaluation is firstly described which has regular-shaped outer surface, and then two 2D gamut boundaries ( CIE-a*b* boundary and CIE-C*L* boundary) are calculated which are often used in gamut mapping process. When our algorithm is compared with several famous gamut calculating algorithms, the gamut volumes are very close, which indicates that our algorithm's accuracy is precise and acceptable.

SUBMITTER: Sun B

PROVIDER: S-EPMC4032652 | biostudies-other | 2014

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Environmentally friendly quantum-dot color filters for ultra-high-definition liquid crystal displays.

Project description:This work reports the synthesis and application of highly tuned cadmium-free green and red InPZnSe1-xSx/ZnS quantum dots (QDs) in QD enhanced liquid crystal displays (LCD). The emissions of the quantum dots were synthetically tuned to sharp emissions at low full-width at half maximum. The QDs were incorporated in LCD devices as quantum dot enhancement film (QDEF) or as a quantum dot incorporated color filter (QDCF). Synthetic tuning of the gradient inter-shell in the QDs leads to reduced full width at half-maximum, resulting in sharp green and red emissions from both types of devices. The application of the same QDs to devices using these different integration techniques shows the superiority of QDCF devices over QDEF ones. The RGB color gamut of a QDCF-LCD was 81.4% of REC.2020 in the CIE 1931 color space compared to 71.2% obtained for a QDEF-LCD display. The improved performance of QDCF was mainly due to the optimal interactions between the green QDs and the green color filter. The superior performance of cadmium-free InPZnSe1-xSx/ZnS QDCFs in LCDs make them well-suited for ultra-high-definition TV formats.

| S-EPMC7519667 | biostudies-literature

Liquid Crystal Microlenses for Autostereoscopic Displays.

Project description:Three-dimensional vision has acquired great importance in the audiovisual industry in the past ten years. Despite this, the first generation of autostereoscopic displays failed to generate enough consumer excitement. Some reasons are little 3D content and performance issues. For this reason, an exponential increase in three-dimensional vision research has occurred in the last few years. In this review, a study of the historical impact of the most important technologies has been performed. This study is carried out in terms of research manuscripts per year. The results reveal that research on spatial multiplexing technique is increasing considerably and today is the most studied. For this reason, the state of the art of this technique is presented. The use of microlenses seems to be the most successful method to obtain autostereoscopic vision. When they are fabricated with liquid crystal materials, extended capabilities are produced. Among the numerous techniques for manufacturing liquid crystal microlenses, this review covers the most viable designs for its use in autostereoscopic displays. For this reason, some of the most important topologies and their relation with autostereoscopic displays are presented. Finally, the challenges in some recent applications, such as portable devices, and the future of three-dimensional displays based on liquid crystal microlenses are outlined.

| S-EPMC5456548 | biostudies-other

A dichotomy color quantization algorithm for the HSI color space.

Project description:Color quantization is used to obtain an image with the same number of pixels as the original but represented using fewer colors. Most existing color quantization algorithms are based on the Red Green Blue (RGB) color space, and there are few color quantization algorithms for the Hue Saturation Intensity (HSI) color space with a simple uniform quantization algorithm. In this paper, we propose a dichotomy color quantization algorithm for the HSI color space. The proposed color quantization algorithm can display images with a smaller number of colors than other quantization methods of RGB color space. The proposed algorithm has three main steps as follows: first, a single-valued monotonic function of the Hue (H) component in the from RGB color space to HSI color space (RGB-HSI) color space conversion is constructed, which can avoid the partition calculation of the H component in the RGB-HSI color space; second, an iterative quantization algorithm based on the single-valued monotonic function is proposed; and third, a dichotomy quantization algorithm is proposed to improve the iterative quantization algorithm. Both visual and numerical evaluations reveal that the proposed method presents promising quantization results.

| S-EPMC10199057 | biostudies-literature

Color Space Transformation-Based Algorithm for Evaluation of Thermochromic Behavior of Cholesteric Liquid Crystals Using Polarized Light Microscopy.

Project description:Cholesteryl ester liquid crystals exhibit thermochromic properties related to the existence of a twisted nematic phase. When used in applications such as thermal mapping, a color change is often monitored by video cameras. Thus, quantitative methods to evaluate thermochromic behavior (e.g., blue-start, red-start, red-end, color play and bandwidth) from video analysis are desirable. However, obtaining quantitative color measurements from digital images remains a significant technical challenge, especially for highly reflective samples such as liquid crystals (for which ultraviolet-visible (UV-vis) reflectance spectroscopy is typically used). We developed a method to determine thermochromic properties from videos of liquid crystal cooling under polarized light microscopy. We relate observed color transitions to quantifiable changes in the cumulative color difference in the International Commission on Illumination (CIE) L*a*b* color space and validate this method with UV-vis reflectance spectroscopy. The measured thermochromic behavior and associated measurement uncertainties (coefficient of variations) were comparable to UV-vis reflectance measurements.

| S-EPMC7143408 | biostudies-literature

Color Space Transformation-Based Smartphone Algorithm for Colorimetric Urinalysis.

Project description:Urine strips are widely applied for rapid analysis of various indexes of urine for clinical examinations. The tests mainly rely on the application of a urine analyzer, which suffers several drawbacks and cannot meet the requirements of point-of-care testing (POCT). The integration of a smartphone with a biosensor has recently attracted great attention. We herein propose a human vision-based smartphone algorithm for colorimetric analysis of various urine indexes. A CIEDE2000 formula in CIELab color space is applied for the evaluation of color difference, which may greatly improve the analytical performances of urine strips. The proposed algorithm also possesses merits such as good accuracy, quantitative analysis, and limited calculation task, which is suitable for the application with smartphone platform. Experimental results demonstrate that the proposed method shows excellent reliability compared with the urine analyzer and some other algorithms. In addition, human real samples are successfully analyzed with excellent accuracy. Therefore, this work provides a convenient colorimetric tool for POCT urine analysis.

| S-EPMC6175489 | biostudies-literature

Dielectric Spectroscopy Analysis of Liquid Crystals Recovered from End-of-Life Liquid Crystal Displays.

Project description:In the present work, the dielectric properties of recycled liquid crystals (LCs) (non-purified, purified, and doped with diamond nanoparticles at 0.05, 0.1, and 0.2 wt%) were investigated. The studied LC mixtures were obtained from industrial recycling of end-of-life LC displays presenting mainly nematic phases. Dielectric measurements were carried out at room temperature on a frequency range from 0.1 to 106 Hz using an impedance analyzer. The amplitude of the oscillating voltage was fixed at 1 V using cells with homogeneous and homeotropic alignments. Results show that the dielectric anisotropy of all purified samples presents positive values and decreases after the addition of diamond nanoparticles to the LC mixtures. DC conductivity values were obtained by applying the universal law of dielectric response proposed by Jonscher. In addition, conductivity of the doped LC mixtures is lower than that of the undoped and non-purified LC.

| S-EPMC8150612 | biostudies-literature

Temporal properties of liquid crystal displays: implications for vision science experiments.

Project description:Liquid crystal displays (LCD) are currently replacing the previously dominant cathode ray tubes (CRT) in most vision science applications. While the properties of the CRT technology are widely known among vision scientists, the photometric and temporal properties of LCDs are unfamiliar to many practitioners. We provide the essential theory, present measurements to assess the temporal properties of different LCD panel types, and identify the main determinants of the photometric output. Our measurements demonstrate that the specifications of the manufacturers are insufficient for proper display selection and control for most purposes. Furthermore, we show how several novel display technologies developed to improve fast transitions or the appearance of moving objects may be accompanied by side-effects in some areas of vision research. Finally, we unveil a number of surprising technical deficiencies. The use of LCDs may cause problems in several areas in vision science. Aside from the well-known issue of motion blur, the main problems are the lack of reliable and precise onsets and offsets of displayed stimuli, several undesirable and uncontrolled components of the photometric output, and input lags which make LCDs problematic for real-time applications. As a result, LCDs require extensive individual measurements prior to applications in vision science.

| S-EPMC3439495 | biostudies-literature

Color liquid crystal grating based color holographic 3D display system with large viewing angle.

Project description:Holographic 3D display is highly desirable for numerous applications ranging from medical treatments to military affairs. However, it is challenging to simultaneously achieve large viewing angle and high-fidelity color reconstruction due to the intractable constraints of existing technology. Here, we conceptually propose and experimentally demonstrate a simple and feasible pathway of using a well-designed color liquid crystal grating to overcome the inevitable chromatic aberration and enlarge the holographic viewing angle, thus enabling large-viewing-angle and color holographic 3D display. The use of color liquid crystal grating allows performing secondary diffraction modulation on red, green and blue reproduced images simultaneously and extending the viewing angle in the holographic 3D display system. In principle, a chromatic aberration-free hologram generation mechanism in combination with the color liquid crystal grating is proposed to pave the way for on such a superior holographic 3D display. The proposed system shows a color viewing angle of ~50.12°, which is about 7 times that of the traditional system with a single spatial light modulator. This work presents a paradigm for achieving desirable holographic 3D display, and is expected to provide a new way for the wide application of holographic display.

| S-EPMC10788332 | biostudies-literature

Zwitterion-doped liquid crystal speckle reducers for immersive displays and vectorial imaging.

Project description:Lasers possess many attractive features (e.g., high brightness, narrow linewidth, well-defined polarization) that make them the ideal illumination source for many different scientific and technological endeavors relating to imaging and the display of high-resolution information. However, their high-level of coherence can result in the formation of noise, referred to as speckle, that can corrupt and degrade images. Here, we demonstrate a new electro-optic technology for combatting laser speckle using a chiral nematic liquid crystal (LC) dispersed with zwitterionic dopants. Results are presented that demonstrate when driven at the optimum electric field conditions, the speckle noise can be reduced by >90% resulting in speckle contrast (C) values of C = 0.07, which is approaching that required to be imperceptible to the human eye. This LC technology is then showcased in an array of different display and imaging applications, including a demonstration of speckle reduction in modern vectorial laser-based imaging.

| S-EPMC10514055 | biostudies-literature

Advanced liquid crystal devices for augmented reality and virtual reality displays: principles and applications.

Project description:Liquid crystal displays (LCDs) and photonic devices play a pivotal role to augmented reality (AR) and virtual reality (VR). The recently emerging high-dynamic-range (HDR) mini-LED backlit LCDs significantly boost the image quality and brightness and reduce the power consumption for VR displays. Such a light engine is particularly attractive for compensating the optical loss of pancake structure to achieve compact and lightweight VR headsets. On the other hand, high-resolution-density, and high-brightness liquid-crystal-on-silicon (LCoS) is a promising image source for the see-through AR displays, especially under high ambient lighting conditions. Meanwhile, the high-speed LCoS spatial light modulators open a new door for holographic displays and focal surface displays. Finally, the ultrathin planar diffractive LC optical elements, such as geometric phase LC grating and lens, have found useful applications in AR and VR for enhancing resolution, widening field-of-view, suppressing chromatic aberrations, creating multiplanes to overcome the vergence-accommodation conflict, and dynamic pupil steering to achieve gaze-matched Maxwellian displays, just to name a few. The operation principles, potential applications, and future challenges of these advanced LC devices will be discussed.

| S-EPMC9151772 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data