Novel MSVPWM to reduce the inductor current ripple for Z-source inverter in electric vehicle applications.
Ontology highlight
ABSTRACT:
SUBMITTER: Zhang Q
PROVIDER: S-EPMC4032747 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Free-piston engine generators (FPEGs) have huge potential to be the principal energy conversion device for generating electricity from fuel as part of a hybrid-electric vehicle (EV) powertrain system. The principal advantages lay in the fact that they are theoretically more efficient, more compact, and more lightweight compared to other competing EV hybrid and range-extender solutions (internal combustion engines, rotary engines, fuel cells, etc.). However, this potential has yet to be realized. This article details a novel dual-piston FPEG configuration and presents the full layout of a system and provides technical evidence of a commercial FPEG system's likely size and weight. The work also presents the first results obtained from a project which set-out to realize an operational FPEG system in hardware through the development and testing of a flexible prototype test platform. The work presents the performance and control system characteristics, for a first of a kind system; these show great technical potential with stable and repeatable combustion events achieved with around 700 W per cylinder and 26% indicated efficiency.
| S-EPMC7587148 | biostudies-literature
Project description:For electric vehicle application, one of the problems to be solved is defrosting or defogging a windshield or a side mirror without gas-fired heaters. In this paper, we report on a high performance of transparent heater with meshed amorphous-SiInZnO (SIZO)/ Ag/ amorphous-SiInZnO (SIZO) (SAS) for pure electric vehicles. We have adopted amorphous oxide materials like SIZO since SIZO is well known amorphous oxide materials showing high transparency and smooth surface roughness. With the mesh processing technology, a transparent electrode with high transmittance of 91% and low sheet resistance of 13.8 Ω/ϒ was implemented. When a 10 V supply voltage is applied to transparent heater, the transparent heater on glass substrate was heated up to 130oC in just 5 seconds and then reached to 250oC after tens of seconds due to the low sheet resistance. In addition, the SAS transparent meshed heater (TMH) showed high stability under cycling test and long time working stability test.
| S-EPMC7297967 | biostudies-literature
Project description:The control of cellular processes by direct electronic interface will facilitate the development of biosensors, synthetic biology, and nanobiotechnology by providing the means to pass information from synthetic to living elements of hybrid systems. To investigate the potential of manipulating cellular gene expression by means of electric current, Escherichia coli cultures were screened for electric current inducible genes using global gene expression profiling. Cells in stationary phase were subjected to a DC current density of 2.5 mA/cm2 for 2 min after which the cells were lysed and the total RNA extracted. Of the 4290 expressed genes in E. coli , 432 genes were found to be significantly differentially expressed at an effective alpha value of 5.8 X 10-6. Of these, 333 genes were induced and 99 repressed. Several genes were verified as differentially expressed by quantitative real-time RT-PCR. The set of differentially expressed genes were examined for the presence of regulatory factors, subsidiary regulon genes, and biological function, particularly redox functions. Transcripts for the regulatory proteins fnr, sspB, soxS, oxyR, creB and yeiL were found to be up-regulated, and crp was down regulated. While soxS and oxyR were up-regulated, the downstream genes controlled by these regulatory proteins were not differentially expressed, suggesting that the oxidative stress level of low-current electric exposure is small. Genes controlled by FNR and CRP, many of which have redox function, were found to be differentially expressed suggesting modulation by direct reduction that can only be partially explained as a response to the reducing environment created by the electrolytic generation of H2 at the cathode. Genes associated with phosphate metabolism and membrane proteins were also differentially expressed. Keywords: electric current induced gene expression
2008-02-12 | GSE5192 | GEO
Project description:Accurate, practical, and robust evaluation of the battery state of health is crucial to the efficient and reliable operation of electric vehicles. However, the limited availability of large-scale, high-quality field data hinders the development of the battery management system for state of health estimation, lifetime prediction, and fault detection in various applications. In this work, to gain insights into underlying factors limiting battery management system performance in real-world vehicles, we analyze the operational data of 300 diverse electric vehicles over three years to understand the disparities between field data and laboratory battery test data and their effect on state of health estimation. Furthermore, we propose a deep learning-based multi-modal framework to effectively leverage historical vehicle data for efficient, accurate, and cost-effective state of health estimation. The proposed paradigm exhibits considerable potential for numerous applications in state estimation and diagnostics in multi-sensor systems. Furthermore, we make the field data of these electric vehicles publicly available aiming to promote further research on the development of effective and reliable battery management systems for real-world vehicles.
| S-EPMC11779878 | biostudies-literature
Project description:The control of cellular processes by direct electronic interface will facilitate the development of biosensors, synthetic biology, and nanobiotechnology by providing the means to pass information from synthetic to living elements of hybrid systems. To investigate the potential of manipulating cellular gene expression by means of electric current, Escherichia coli cultures were screened for electric current inducible genes using global gene expression profiling. Cells in stationary phase were subjected to a DC current density of 2.5 mA/cm2 for 2 min after which the cells were lysed and the total RNA extracted. Of the 4290 expressed genes in E. coli , 432 genes were found to be significantly differentially expressed at an effective alpha value of 5.8 X 10-6. Of these, 333 genes were induced and 99 repressed. Several genes were verified as differentially expressed by quantitative real-time RT-PCR. The set of differentially expressed genes were examined for the presence of regulatory factors, subsidiary regulon genes, and biological function, particularly redox functions. Transcripts for the regulatory proteins fnr, sspB, soxS, oxyR, creB and yeiL were found to be up-regulated, and crp was down regulated. While soxS and oxyR were up-regulated, the downstream genes controlled by these regulatory proteins were not differentially expressed, suggesting that the oxidative stress level of low-current electric exposure is small. Genes controlled by FNR and CRP, many of which have redox function, were found to be differentially expressed suggesting modulation by direct reduction that can only be partially explained as a response to the reducing environment created by the electrolytic generation of H2 at the cathode. Genes associated with phosphate metabolism and membrane proteins were also differentially expressed. Three biological replicates were exposed to electric current along with three biological replicate controls.
2010-06-25 | E-GEOD-5192 | biostudies-arrayexpress
Project description:Existing regulations regarding fuel energy intensity (MJ/km, litres/100 km, or its inverse, miles per gallon) of light-duty vehicles (LDVs: cars, SUVs, and pickup trucks) for 2025 or 2030 either fall short of the longterm technical potential, or contain numerous loopholes that undermine their effectiveness. At the same time, governments are subsidizing the purchase of electric vehicles (EVs) while the market share of SUVs and pickup trucks grows. This paper reviews the feasible fuel and/or electricity energy intensity of LDVs, and argues that the severity of impending anthropogenic global warming merits a strong policy approach that (i) prescribes significant improvements in the energy intensity of non-electric LDVs and plugin hybrid EVs (PHEVs) when running on fuel, (ii) is independent of the number of electric vehicles sold, and (iii) is accompanied by an overall limit on fleet-average CO2 emissions that applies to all manufacturers irrespective of the average size and mass of vehicles sold. Subsidies for EVs should be scaled back or eliminated, relying instead in the near term on deep across-the-board improvements in the fuel efficiency of LDVs that will have beneficial spillover effects on the eventual energy intensity of EVs and mineral requirements following a delayed market scale-up.
| S-EPMC7467875 | biostudies-literature
Project description:Electric vehicle sales have been growing rapidly in the United States and around the world. This study explores the drivers of demand for electric vehicles, examining whether this trend is primarily a result of technology improvements or changes in consumer preferences for the technology over time. We conduct a discrete choice experiment of new vehicle consumers in the United States, weighted to be representative of the population. Results suggest that improved technology has been the stronger force. Estimates of consumer willingness to pay for vehicle attributes show that when consumers compare a gasoline vehicle to its battery electric vehicle (BEV) counterpart, the improved operating cost, acceleration, and fast-charging capabilities of today's BEVs mostly or entirely compensate for their perceived disadvantages, particularly for longer-range BEVs. Moreover, forecasted improvements of BEV range and price suggest that consumer valuation of many BEVs is expected to equal or exceed their gasoline counterparts by 2030. A suggestive market-wide simulation extrapolation indicates that if every gasoline vehicle had a BEV option in 2030, the majority of new car and near-majority of new sport-utility vehicle choice shares could be electric in that year due to projected technology improvements alone.
| S-EPMC10265978 | biostudies-literature
Project description:Data for six electric vehicle WOT interior sound measurements and eight enhanced sound signatures are presented. The measurement of electric vehicle interior sound signature data and the enhancement of these stimuli are documented in this data article. The procedures and equipment that were used to record the data, as well as the transposition, harmony and order addition, frequency filtering and modulation enhancement techniques that were applied to these stimuli are explained in detail. The transient frequency content of the 12 sound stimuli is presented in acoustic spectrograms along with the audio files in.mp3 format.
| S-EPMC6230979 | biostudies-literature
Project description:This paper proposes a new energy management system to combine Fuel Cells (FC) and photovoltaic (PV) panels as primary power sources. Also, battery and Super Capacitor (SC) banks are considered as secondary energy systems. The high power density and the fast dynamics of SCs combined with the high energy density and medium dynamics of batteries would be an ideal combination for FC vehicles. The high step-up DC/DC converter is used along with the implementation of the maximum power point tracking algorithm (MPPT) to adapt the low power of PV panels with the high power of DC-Link. Also, an evolutionary optimization algorithm is proposed along with the FOPI controller to improve the output of the energy management algorithm and control the sources more efficiently. The simulation results are validated for a standard urban driving cycle. It indicates for the case of the sustained presence of a PV source during a typical driving cycle, the source delivers about 55% of its maximum power.
| S-EPMC11555224 | biostudies-literature
Project description:This data article refers to the paper "Analysis of residential EV energy flexibility potential based on real-world charging reports and smart meter data" [1]. The reported datasets deal with residential electric vehicle (EV) charging in apartment buildings. Several datasets are provided, with different levels of detail, aiming to serve various needs. The paper provides real-world EV charging reports describing 6,878 charging sessions registered by 97 user IDs, from December 2018 to January 2020. The charging reports include identifiers, plug-in time, plug-out time and charged energy for the sessions. Synthetic charging loads are provided with hourly resolution, assuming charging power 3.6 kW or 7.2 kW and immediate charging after plug-in. The non-charging idle time reflects the flexibility potential for the charging session, with synthetic idle capacity as the energy which could potentially have been charged during the idle times. Synthetic hourly charging loads and idle capacity are provided both for individual users, and aggregated for users with private or shared charge points. For a main garage with 33% of the charging sessions, smart meter data and synthetic charging loads are available, with aggregated values each hour. Finally, local hourly traffic density in 5 nearby traffic locations is provided, for further work related to the correlation with plug-in/plug-out times. Researchers, energy analysts, charge point operators, building owners and policy makers can benefit from the datasets and analyses, serving to increase the knowledge of residential EV charging. The data provides valuable insight into residential charging, useful for e.g. forecasting energy loads and flexibility, planning and modelling activities.
| S-EPMC8134705 | biostudies-literature