Development of a GA-fuzzy-immune PID controller with incomplete derivation for robot dexterous hand.
Ontology highlight
ABSTRACT:
SUBMITTER: Liu XH
PROVIDER: S-EPMC4109120 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Undesirable vibrations resulting from the use of vibrating hand-held tools decrease the tool performance and user productivity. In addition, prolonged exposure to the vibration can cause ergonomic injuries known as the hand-arm vibration syndrome (HVAS). Therefore, it is very important to design a vibration suppression mechanism that can isolate or suppress the vibration transmission to the users' hands to protect them from HAVS. While viscoelastic materials in anti-vibration gloves are used as the passive control approach, an active vibration control has shown to be more effective but requires the use of sensors, actuators and controllers. In this paper, the design of a controller for an anti-vibration glove is presented. The aim is to keep the level of vibrations transferred from the tool to the hands within a healthy zone. The paper also describes the formulation of the hand-glove system's mathematical model and the design of a fuzzy parallel distributed compensation (PDC) controller that can cater for different hand masses. The performances of the proposed controller are evaluated through simulations and the results are benchmarked with two other active vibration control techniques-proportional integral derivative (PID) controller and active force controller (AFC). The simulation results show a superior performance of the proposed controller over the benchmark controllers. The designed PDC controller is able to suppress the vibration transferred to the user's hand 93% and 85% better than the PID controller and the AFC, respectively.
| S-EPMC8576561 | biostudies-literature
Project description:This work proposes dedicated hardware for an intelligent control system on Field Programmable Gate Array (FPGA). The intelligent system is represented as Takagi-Sugeno Fuzzy-PI controller. The implementation uses a fully parallel strategy associated with a hybrid bit format scheme (fixed-point and floating-point). Two hardware designs are proposed; the first one uses a single clock cycle processing architecture, and the other uses a pipeline scheme. The bit accuracy was tested by simulation with a nonlinear control system of a robotic manipulator. The area, throughput, and dynamic power consumption of the implemented hardware are used to validate and compare the results of this proposal. The results achieved allow the use of the proposed hardware in applications with high-throughput, low-power and ultra-low-latency requirements such as teleoperation of robot manipulators, tactile internet, or industry 4.0 automation, among others.
| S-EPMC7180753 | biostudies-literature
Project description:Demand of Power electronics converter is increased due to the rapid increase of green re-sources. The distributed nature of uncontrolled renewable energy resources are connected with the grid via power electronics converter. DC-DC converters are high-frequency current conversion circuits that use transformers, inductors, and capacitors to smooth switching noise into regulated DC voltages. In this study, a comparative performance analysis of Proportional integral Derivative (PID) and fuzzy logic controller (FLC) for DC-DC Boost Converter is presented. PID-based controller for dynamic boosting of DC-DC boost converter was replaced by Fuzzy Inference system (FIS) to study the system behavior. Five different membership functions were performed to observe the response of the system for DC -DC boost converter with FIS controller. The performances of FIS-based controller and PID-based controller for DC-DC boost converter were compared in detail. Also, the proposed techniques for the switching mode of DC-DC converter have been applied. The performance analysis of both PID and fuzzy controller was simulated using MAT LAB. The results of FIS based approach are better than PID based controller in terms of transient responses.
| S-EPMC10586690 | biostudies-literature
Project description:Animals dynamically adapt to varying terrain and small perturbations with remarkable ease. These adaptations arise from complex interactions between the environment and biomechanical and neural components of the animal's body and nervous system. Research into mammalian locomotion has resulted in several neural and neuro-mechanical models, some of which have been tested in simulation, but few "synthetic nervous systems" have been implemented in physical hardware models of animal systems. One reason is that the implementation into a physical system is not straightforward. For example, it is difficult to make robotic actuators and sensors that model those in the animal. Therefore, even if the sensorimotor circuits were known in great detail, those parameters would not be applicable and new parameter values must be found for the network in the robotic model of the animal. This manuscript demonstrates an automatic method for setting parameter values in a synthetic nervous system composed of non-spiking leaky integrator neuron models. This method works by first using a model of the system to determine required motor neuron activations to produce stable walking. Parameters in the neural system are then tuned systematically such that it produces similar activations to the desired pattern determined using expected sensory feedback. We demonstrate that the developed method successfully produces adaptive locomotion in the rear legs of a dog-like robot actuated by artificial muscles. Furthermore, the results support the validity of current models of mammalian locomotion. This research will serve as a basis for testing more complex locomotion controllers and for testing specific sensory pathways and biomechanical designs. Additionally, the developed method can be used to automatically adapt the neural controller for different mechanical designs such that it could be used to control different robotic systems.
| S-EPMC5378996 | biostudies-literature
Project description:The brain emotional learning (BEL) system was inspired by the biological amygdala-orbitofrontal model to mimic the high speed of the emotional learning mechanism in the mammalian brain, which has been successfully applied in many real-world applications. Despite of its success, such system often suffers from slow convergence for online humanoid robotic control. This paper presents an improved fuzzy BEL model (iFBEL) neural network by integrating a fuzzy neural network (FNN) to a conventional BEL, in an effort to better support humanoid robots. In particular, the system inputs are passed into a sensory and emotional channels that jointly produce the final outputs of the network. The non-linear approximation ability of the iFBEL is achieved by taking the BEL network as the emotional channel. The proposed iFBEL works with a robust controller in generating the hand and gait motion of a humanoid robot. The updating rules of the iFBEL-based controller are composed of two parts, including a sensory channel followed by the updating rules of the conventional BEL model, and the updating rules of the FNN and the robust controller which are derived from the "Lyapunov" function. The experiments on a three-joint robot manipulator and a six-joint biped robot demonstrated the superiority of the proposed system in reference to a conventional proportional-integral-derivative controller and a fuzzy cerebellar model articulation controller, based on the more accurate and faster control performance of the proposed iFBEL.
| S-EPMC6369368 | biostudies-literature
Project description:Three-phase induction motors (TIMs) are widely used for machines in industrial operations. As an accurate and robust controller, fuzzy logic controller (FLC) is crucial in designing TIMs control systems. The performance of FLC highly depends on the membership function (MF) variables, which are evaluated by heuristic approaches, leading to a high processing time. To address these issues, optimisation algorithms for TIMs have received increasing interest among researchers and industrialists. Here, we present an advanced and efficient quantum-inspired lightning search algorithm (QLSA) to avoid exhaustive conventional heuristic procedures when obtaining MFs. The accuracy of the QLSA based FLC (QLSAF) speed control is superior to other controllers in terms of transient response, damping capability and minimisation of statistical errors under diverse speeds and loads. The performance of the proposed QLSAF speed controller is validated through experiments. Test results under different conditions show consistent speed responses and stator currents with the simulation results.
| S-EPMC7393368 | biostudies-literature
Project description:In order to realize the stability control of the planar inverted pendulum system, which is a typical multi-variable and strong coupling system, a new fuzzy-evidential controller based on fuzzy inference and evidential reasoning is proposed. Firstly, for each axis, a fuzzy nine-point controller for the rod and a fuzzy nine-point controller for the cart are designed. Then, in order to coordinate these two controllers of each axis, a fuzzy-evidential coordinator is proposed. In this new fuzzy-evidential controller, the empirical knowledge for stabilization of the planar inverted pendulum system is expressed by fuzzy rules, while the coordinator of different control variables in each axis is built incorporated with the dynamic basic probability assignment (BPA) in the frame of fuzzy inference. The fuzzy-evidential coordinator makes the output of the control variable smoother, and the control effect of the new controller is better compared with some other work. The experiment in MATLAB shows the effectiveness and merit of the proposed method.
| S-EPMC4970802 | biostudies-literature
Project description:An incomplete interlobar fissure makes thoracoscopic lobectomy difficult and is predictive of morbidity after thoracoscopic lobectomy. This report demonstrates the robot-assisted thoracoscopic (RATS) lobectomy technique for patients with severe incomplete interlobar fissures. A fissureless approach was chosen for pulmonary resection. Near-infrared fluorescence imaging with intravenous indocyanine green (ICG) was used to detect the interlobar line after transection of the bronchus, pulmonary artery and vein. Interlobar fissure was identified and divided by robotic staplers. This combined technique using ICG and fissureless lobectomy made RATS lobectomy safe for patients with severe incomplete interlobar fissures.
| S-EPMC8364786 | biostudies-literature
Project description:This paper proposes a tuning method based on the Pythagorean fuzzy similarity measure and multi-criteria decision-making to determine the most suitable controller parameters for Fractional-order Proportional Integral Derivative (FOPID) and Integer-order Proportional Integral-Proportional Derivative (PI-PD) controllers. Due to the power of the Pythagorean fuzzy approach to evaluate a phenomenon with two memberships known as membership and non-membership, a multi-objective cost function based on the Pythagorean similarity measure is defined. The transient and steady-state properties of the system output were used for the multi-objective cost function. Thus, the determination of the controller parameters was considered a multi-criteria decision-making problem. Ant colony optimization for continuous domains (ACOR) and artificial bee colony (ABC) optimization are utilized to minimize multi-objective cost functions. The proposed method in the study was applied to three different systems: a second-order non-minimum phase stable system, a first-order unstable system with time delay, and a fractional-order unstable system with time delay, to validate its effectiveness. The cost function utilized in the proposed method is compared with the performance measures widely used in the literature based on the integral of the error, such as IAE (Integral Absolute Error), ITAE (Integral Time Absolute Error), ISE (Integral Square Error), and ITSE (Integral Time Square Error). The proposed method provides a more effective control performance by improving the system response characteristics compared to other cost functions. With the proposed method, the undershoot rate could be significantly reduced in the non-minimum phase system. In the other two systems, significant improvements were achieved compared to other methods by reducing the overshoot rate and oscillation. The proposed method does not require knowing the mathematical model of the system and offers a solution that does not require complex calculations. The proposed method can be used alone. Or it can be used as a second and fine-tuning method after a tuning process.
| S-EPMC10495962 | biostudies-literature
Project description:Closed-loop control strategies for deep brain stimulation (DBS) in Parkinson's disease offer the potential to provide more effective control of patient symptoms and fewer side effects than continuous stimulation, while reducing battery consumption. Most of the closed-loop methods proposed and tested to-date rely on controller parameters, such as controller gains, that remain constant over time. While the controller may operate effectively close to the operating point for which it is set, providing benefits when compared to conventional open-loop DBS, it may perform sub-optimally if the operating conditions evolve. Such changes may result from, for example, diurnal variation in symptoms, disease progression or changes in the properties of the electrode-tissue interface. In contrast, an adaptive or "self-tuning" control mechanism has the potential to accommodate slowly varying changes in system properties over a period of days, months, or years. Such an adaptive mechanism would automatically adjust the controller parameters to maintain the desired performance while limiting side effects, despite changes in the system operating point. In this paper, two neural modeling approaches are utilized to derive and test an adaptive control scheme for closed-loop DBS, whereby the gain of a feedback controller is continuously adjusted to sustain suppression of pathological beta-band oscillatory activity at a desired target level. First, the controller is derived based on a simplified firing-rate model of the reciprocally connected subthalamic nucleus (STN) and globus pallidus (GPe). Its efficacy is shown both when pathological oscillations are generated endogenously within the STN-GPe network and when they arise in response to exogenous cortical STN inputs. To account for more realistic biological features, the control scheme is then tested in a physiologically detailed model of the cortical basal ganglia network, comprised of individual conductance-based spiking neurons, and simulates the coupled DBS electric field and STN local field potential. Compared to proportional feedback methods without gain adaptation, the proposed adaptive controller was able to suppress beta-band oscillations with less power consumption, even as the properties of the controlled system evolve over time due to alterations in the target for beta suppression, beta fluctuations and variations in the electrode impedance.
| S-EPMC7339866 | biostudies-literature