An adaptive framework for real-time ECG transmission in mobile environments.
Ontology highlight
ABSTRACT:
SUBMITTER: Kang K
PROVIDER: S-EPMC4109261 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The spectrum of a laser frequency comb consists of several hundred thousand equally spaced lines over a broad spectral bandwidth. Such frequency combs have revolutionized optical frequency metrology and they now hold much promise for significant advances in a growing number of applications including molecular spectroscopy. Despite an intriguing potential for the measurement of molecular spectra spanning tens of nanometres within tens of microseconds at Doppler-limited resolution, the development of dual-comb spectroscopy is hindered by the demanding stability requirements of the laser combs. Here we overcome this difficulty and experimentally demonstrate a concept of real-time dual-comb spectroscopy, which compensates for laser instabilities by electronic signal processing. It only uses free-running mode-locked lasers without any phase-lock electronics. We record spectra spanning the full bandwidth of near-infrared fibre lasers with Doppler-limited line profiles highly suitable for measurements of concentrations or line intensities. Our new technique of adaptive dual-comb spectroscopy offers a powerful transdisciplinary instrument for analytical sciences.
| S-EPMC3948060 | biostudies-other
Project description:BackgroundIndividuals in stressful work environments often experience mental health issues, such as depression. Reducing depression rates is difficult because of persistently stressful work environments and inadequate time or resources to access traditional mental health care services. Mobile health (mHealth) interventions provide an opportunity to deliver real-time interventions in the real world. In addition, the delivery times of interventions can be based on real-time data collected with a mobile device. To date, data and analyses informing the timing of delivery of mHealth interventions are generally lacking.ObjectiveThis study aimed to investigate when to provide mHealth interventions to individuals in stressful work environments to improve their behavior and mental health. The mHealth interventions targeted 3 categories of behavior: mood, activity, and sleep. The interventions aimed to improve 3 different outcomes: weekly mood (assessed through a daily survey), weekly step count, and weekly sleep time. We explored when these interventions were most effective, based on previous mood, step, and sleep scores.MethodsWe conducted a 6-month micro-randomized trial on 1565 medical interns. Medical internship, during the first year of physician residency training, is highly stressful, resulting in depression rates several folds higher than those of the general population. Every week, interns were randomly assigned to receive push notifications related to a particular category (mood, activity, sleep, or no notifications). Every day, we collected interns' daily mood valence, sleep, and step data. We assessed the causal effect moderation by the previous week's mood, steps, and sleep. Specifically, we examined changes in the effect of notifications containing mood, activity, and sleep messages based on the previous week's mood, step, and sleep scores. Moderation was assessed with a weighted and centered least-squares estimator.ResultsWe found that the previous week's mood negatively moderated the effect of notifications on the current week's mood with an estimated moderation of -0.052 (P=.001). That is, notifications had a better impact on mood when the studied interns had a low mood in the previous week. Similarly, we found that the previous week's step count negatively moderated the effect of activity notifications on the current week's step count, with an estimated moderation of -0.039 (P=.01) and that the previous week's sleep negatively moderated the effect of sleep notifications on the current week's sleep with an estimated moderation of -0.075 (P<.001). For all three of these moderators, we estimated that the treatment effect was positive (beneficial) when the moderator was low, and negative (harmful) when the moderator was high.ConclusionsThese findings suggest that an individual's current state meaningfully influences their receptivity to mHealth interventions for mental health. Timing interventions to match an individual's state may be critical to maximizing the efficacy of interventions.Trial registrationClinicalTrials.gov NCT03972293; http://clinicaltrials.gov/ct2/show/NCT03972293.
| S-EPMC7157494 | biostudies-literature
Project description:There is a growing body of evidence that important aspects of human cognition have been marginalized, or overlooked, by traditional cognitive science. In particular, the use of laboratory-based experiments in which stimuli are artificial, and response options are fixed, inevitably results in findings that are less ecologically valid in relation to real-world behavior. In the present review we highlight the opportunities provided by a range of new mobile technologies that allow traditionally lab-bound measurements to now be collected during natural interactions with the world. We begin by outlining the theoretical support that mobile approaches receive from the development of embodied accounts of cognition, and we review the widening evidence that illustrates the importance of examining cognitive processes in their context. As we acknowledge, in practice, the development of mobile approaches brings with it fresh challenges, and will undoubtedly require innovation in paradigm design and analysis. If successful, however, the mobile cognition approach will offer novel insights in a range of areas, including understanding the cognitive processes underlying navigation through space and the role of attention during natural behavior. We argue that the development of real-world mobile cognition offers both increased ecological validity, and the opportunity to examine the interactions between perception, cognition and action-rather than examining each in isolation.
| S-EPMC5226959 | biostudies-other
Project description:BackgroundThe automatic interpretation of electrocardiography (ECG) data can provide continuous analysis of heart activity, allowing the effective use of wireless devices such as the Holter monitor.Materials and methodsWe propose an intelligent heartbeat monitoring system to detect the possibility of arrhythmia in real time. We detected heartbeats and extracted features such as the QRS complex and P wave from ECG signals using the Pan-Tompkins algorithm, and the heartbeats were then classified into 16 types using a decision tree.ResultsWe tested the sensitivity, specificity, and accuracy of our system against data from the MIT-BIH Arrhythmia Database. Our system achieved an average accuracy of 97% in heartbeat detection and an average heartbeat classification accuracy of above 96%, which is comparable with the best competing schemes.ConclusionsThis work provides a guide to the systematic design of an intelligent classification system for decision support in Holter ECG monitoring.
| S-EPMC4270110 | biostudies-literature
Project description:Photoplethysmography imaging (PPGI) sensors have attracted a significant amount of attention as they enable the remote monitoring of heart rates (HRs) and thus do not require any additional devices to be worn on fingers or wrists. In this study, we mounted PPGI sensors on a robot for active and autonomous HR (R-AAH) estimation. We proposed an algorithm that provides accurate HR estimation, which can be performed in real time using vision and robot manipulation algorithms. By simplifying the extraction of facial skin images using saturation (S) values in the HSV color space, and selecting pixels based on the most frequent S value within the face image, we achieved a reliable HR assessment. The results of the proposed algorithm using the R-AAH method were evaluated by rigorous comparison with the results of existing algorithms on the UBFC-RPPG dataset (n = 42). The proposed algorithm yielded an average absolute error (AAE) of 0.71 beats per minute (bpm). The developed algorithm is simple, with a processing time of less than 1 s (275 ms for an 8-s window). The algorithm was further validated on our own dataset (BAMI-RPPG dataset [n = 14]) with an AAE of 0.82 bpm.
| S-EPMC9065061 | biostudies-literature
Project description:BackgroundMobile health provides promising opportunities to perform population surveillance in rural, impoverished, or unstable communities. The objective of this study was to test the efficacy and accuracy of data collected by community informants in extreme low-resource environments using electronic surveys and mobile phones.MethodsWe carried out a population-based, cross-sectional survey between October and November 2017 measuring access to health care and prenatal services for pregnant women in the Northern Region of Malawi. The survey was conducted by members of the community who received one day of training and volunteered to conduct a survey for each live birth that occurred within their predetermined catchment area. A study member audited less than 2% of survey responses, where community informant responses were compared to community member self-reports.ResultsA total of 915 survey responses were recorded by 21 community informants. These surveys recorded 621 live births and 4 cases of maternal mortality. This represents a maternal mortality rate of 0.64% (95% confidence interval (CI) = 0.2% to 1.6%), roughly equal to the United Nations Children's Fund (UNICEF) estimate from 2015 of 634 per 100 000 live births, or 0.63%. This survey captured 120 births by adolescent mothers aged 15-19 out of 673 responses about maternal age. This represents 17.8% (95% CI = 15.1% to 20.9%) of all births, slightly higher than the UNICEF estimate of 143 per 1000 live births (14.3%). Finally, 51.7% of women were recorded as attending 4 antenatal care visits (95% CI = 47.8% to 55.7%), consistent with the 2015-2016 Demographic and Health Survey (DHS) value of 51%.ConclusionsThe use of cellular phones and electronic surveys by community informants allowed for the real-time capture of data in an area where access is limited by seasonally impassable roads and unreliable cell reception. The data recorded by the surveys is comparable to accepted statistics in several measures. Community reporting of health care data can provide an efficient method of monitoring extremely rural or hard to reach communities.
| S-EPMC7688196 | biostudies-literature
Project description:BACKGROUND:Mobile health (mHealth) methods often rely on active input from participants, for example, in the form of self-report questionnaires delivered via web or smartphone, to measure health and behavioral indicators and deliver interventions in everyday life settings. For short-term studies or interventions, these techniques are deployed intensively, causing nontrivial participant burden. For cases where the goal is long-term maintenance, limited infrastructure exists to balance information needs with participant constraints. Yet, the increasing precision of passive sensors such as wearable physiology monitors, smartphone-based location history, and internet-of-things devices, in combination with statistical feature selection and adaptive interventions, have begun to make such things possible. OBJECTIVE:In this paper, we introduced Wear-IT, a smartphone app and cloud framework intended to begin addressing current limitations by allowing researchers to leverage commodity electronics and real-time decision making to optimize the amount of useful data collected while minimizing participant burden. METHODS:The Wear-IT framework uses real-time decision making to find more optimal tradeoffs between the utility of data collected and the burden placed on participants. Wear-IT integrates a variety of consumer-grade sensors and provides adaptive, personalized, and low-burden monitoring and intervention. Proof of concept examples are illustrated using artificial data. The results of qualitative interviews with users are provided. RESULTS:Participants provided positive feedback about the ease of use of studies conducted using the Wear-IT framework. Users expressed positivity about their overall experience with the framework and its utility for balancing burden and excitement about future studies that real-time processing will enable. CONCLUSIONS:The Wear-IT framework uses a combination of passive monitoring, real-time processing, and adaptive assessment and intervention to provide a balance between high-quality data collection and low participant burden. The framework presents an opportunity to deploy adaptive assessment and intervention designs that use real-time processing and provides a platform to study and overcome the challenges of long-term mHealth intervention.
| S-EPMC7330734 | biostudies-literature
Project description:Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) environmental contamination occurs through droplets and biological fluids released in the surroundings from patients or asymptomatic carriers. Surfaces and objects contaminated by saliva or nose secretions represent a risk for indirect transmission of coronavirus disease 2019 (COVID-19). We assayed surfaces from hospital and living spaces to identify the presence of viral RNA and the spread of fomites in the environment. Anthropic contamination by droplets and biological fluids was monitored by detecting the microbiota signature using multiplex quantitative real-time PCR (qPCR) on selected species and massive sequencing on 16S amplicons. A total of 92 samples (flocked swabs) were collected from critical areas during the pandemic, including indoor (three hospitals and three public buildings) and outdoor surfaces exposed to anthropic contamination (handles and handrails, playgrounds). Traces of biological fluids were frequently detected in spaces open to the public and on objects that are touched with the hands (>80%). However, viral RNA was not detected in hospital wards or other indoor and outdoor surfaces either in the air system of a COVID hospital but only in the surroundings of an infected patient, in consistent association with droplet traces and fomites. Handled objects accumulated the highest level of multiple contaminations by saliva, nose secretions, and fecal traces, further supporting the priority role of handwashing in prevention. In conclusion, anthropic contamination by droplets and biological fluids is widespread in spaces open to the public and can be traced by qPCR. Monitoring fomites can support evaluation of indirect transmission risks for coronavirus or other flu-like viruses in the environment.IMPORTANCE Several studies have evaluated the presence of SARS-CoV-2 in the environment. Saliva and nasopharyngeal droplets can land on objects and surfaces, creating fomites. A suitable indicator would allow the detection of droplets or biofluids carrying the virus. Therefore, we searched for viral RNA and droplets and fomites on at risk surfaces. We monitored by qPCR or next generation sequencing (NGS) droplets through their microbiota. Although the study was performed during the pandemic, SARS-CoV-2 was not significantly found on surfaces, with the only exception of environmental areas near infectious patients. Conversely, anthropic contamination was frequent, suggesting a role for biofluids as putative markers of indirect transmission and risk assessment. Moreover, all SARS-CoV-2-contaminated surfaces showed droplets' microbiota. Fomite monitoring by qPCR may have an impact on public health strategies, supporting prevention of indirect transmission similarly to what is done for other communicable diseases (e.g., influenza and influenza-like infections).
| S-EPMC7845593 | biostudies-literature
Project description:Observation of dynamic processes by transmission electron microscopy (TEM) is an attractive technique to experimentally analyze materials’ nanoscale phenomena and understand the microstructure-properties relationships in nanoscale. Even if spatial and temporal resolutions of real-time TEM increase significantly, it is still difficult to say that the researchers quantitatively evaluate the dynamic behavior of defects. Images in TEM video are a two-dimensional projection of three-dimensional space phenomena, thus missing information must be existed that makes image’s uniquely accurate interpretation challenging. Therefore, even though they are still a clustering high-dimensional data and can be compressed to two-dimensional, conventional statistical methods for analyzing images may not be powerful enough to track nanoscale behavior by removing various artifacts associated with experiment; and automated and unbiased processing tools for such big-data are becoming mission-critical to discover knowledge about unforeseen behavior. We have developed a method to quantitative image analysis framework to resolve these problems, in which machine learning and particle filter estimation are uniquely combined. The quantitative and automated measurement of the dislocation velocity in an Fe-31Mn-3Al-3Si autunitic steel subjected to the tensile deformation was performed to validate the framework, and an intermittent motion of the dislocations was quantitatively analyzed. The framework is successfully classifying, identifying and tracking nanoscale objects; these are not able to be accurately implemented by the conventional mean-path based analysis.
| S-EPMC9217921 | biostudies-literature
Project description:Most existing violence recognition methods have complex network structures and high cost of computation and cannot meet the requirements of large-scale deployment. The purpose of this paper is to reduce the complexity of the model to realize the application of violence recognition on mobile intelligent terminals. To solve this problem, we propose MobileNet-TSM, a lightweight network, which uses MobileNet-V2 as main structure. By incorporating temporal shift modules (TSM), which can exchange information between frames, the capability of extracting dynamic characteristics between consecutive frames is strengthened. Extensive experiments are conducted to prove the validity of this method. Our proposed model has only 8.49MB parameters and 175.86MB estimated total size. Compared with the existing methods, this method greatly reduced the model size, at the cost of an accuracy gap of about 3%. The proposed model has achieved accuracy of 97.959%, 97.5% and 87.75% on three public datasets (Crowd Violence, Hockey Fights, and RWF-2000), respectively. Based on this, we also build a real-time violence recognition application on the Android terminal. The source code and trained models are available on https://github.com/1840210289/MobileNet-TSM.git.
| S-EPMC9621415 | biostudies-literature