Ulnar shortening osteotomy for distal radius malunion.
Ontology highlight
ABSTRACT:
SUBMITTER: Kamal RN
PROVIDER: S-EPMC4117692 | biostudies-other | 2014 Aug
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Background Ulnar sided wrist pain is a commonly encountered complaint of the hand surgeon, and ulnar impaction is a common cause. Surgical treatment aims to reduce the force transmitted through the ulna and traditionally includes diaphyseal ulnar shortening osteotomy and the "wafer" procedure. These procedures have known shortcomings. We describe an alternative option known as the distal metaphyseal ulnar shortening osteotomy (DMUSO). Materials and Methods Retrospective review of eight procedures was undertaken to assess radiographic healing, objective measurements of wrist and forearm motion, grip and pinch strength, and subjective measures of Disabilities of the Arm, Shoulder, and Hand (DASH), Patient-Rated Wrist Evaluation (PRWE), and Michigan Hand Outcomes Questionnaire (MHQ) at a minimum of 12 months following surgery. Description of Technique A wedge osteotomy is made in the osteochondral region of the distal metaphysis of the ulna, and a headless compression screw is used for fixation. Results Five women and three men underwent DMUSO with average follow up at 13 months; the dominant wrist was affected in 7 of 8 patients. The affected wrist had less motion in all planes, and grip and pinch strength was also less in the affected wrist, but only wrist extension was significantly different from the contralateral side. These findings likely did not have an effect on the clinical outcome. Subjective outcomes included average DASH score of 13 (0-35), PRWE 19 (40-11), and MHQ score of 88 (85-100). Conclusions DMUSO is a viable option for patients with ulnar impaction syndrome. It requires intra-articular exposure of the distal radioulnar joint (DRUJ) but is less invasive then diaphyseal shortening. It permits early and reliable return of joint motion and function while avoiding the potential need for hardware removal by using a buried screw.
| S-EPMC4117696 | biostudies-other
Project description:Background Ulnar impaction syndrome is a condition in which the ulna impacts on the ulnar carpus. This most commonly occurs when the ulna is longer than the radius, but it can also occur in wrists with ulnar neutral and ulnar negative variance. Materials and Methods In this paper we outline our surgical technique for ulnar shortening osteotomy. A previously published retrospective case series of 28 patients treated at our center is presented. Fifty consecutive patients who underwent ulnar shortening osteotomy (USO) for ulnar impaction syndrome were approached for study, and 28 consented to review. Mean preoperative ulnar variance was +2.3 mm, and mean postoperative ulnar variance was -0.8 mm. Mean follow-up time was 21.2 months (8 to 41 months) and ten of 28 were receiving workers' compensation. Mean preoperative pain score (visual analog scale; VAS) was 7.9. Univariate analysis was performed to assess clinical and demographic data. In addition, subgroup analysis of workers' compensation patients and smokers was performed. Description of Technique A longitudinal incision over the subcutaneous border of the ulna is used to expose the ulna between the distal and middle third of the ulna from the ulna styloid. Preoperative posteroanterior (PA) X-rays are reviewed to determine the amount of shortening required, with a goal of creating -2 mm variance postoperatively. A 6-hole dynamic compression plate is predrilled distally prior to performing two oblique osteotomies separated by the desired shortening length. The fragments are reduced, controlling for rotation, and plated using compression. In some cases, a lag screw is employed across the oblique osteotomy site. Results Mean pain scores were significantly reduced postoperatively (VAS 7.9 versus 3.1, P < 0.0001). The mean Disabilities of the Arm, Shoulder, and Hand (DASH) score was 37.2 postoperatively. Flexion, extension, and supination were reduced compared with the contralateral unaffected extremity (84.6%, 85.3%, and 86.9% of normal). Patients receiving workers' compensation and smokers had significantly more pain postoperatively (VAS 5.2 vs. 2.0, P = 0.0002 and VAS 4.4 vs 2.4, P < 0.05, respectively). Eleven of 28 patients required hardware removal for plate irritation, and five of 28 patients had a nonunion. Conclusion We present our surgical technique for ulnar shortening osteotomy. Pain was significantly improved in our population; however, patients receiving workers' compensation and smokers had less improvement in pain and higher disability scores.
| S-EPMC4078135 | biostudies-other
Project description:Background The purpose of ulnar shortening osteotomy is literally to shorten the ulna. It can tighten the triangular fibrocartilage complex (TFCC), ulnocarpal ligaments, and interosseous membrane. Nowadays, this method is used to treat ulnar-sided wrist pain, for which we have also started to use a treatment algorithm. The purpose of this study was to review the long-term and clinical results based on our algorithm. Materials and Methods We retrospectively reviewed 30 patients with ulnocarpal impaction syndrome after a minimum follow-up of 5 years (Group A) and then retrospectively evaluated 66 patients with recalcitrant ulnar wrist pain treated based on our algorithm (Group B). Description of Technique Ulnocarpal abutment was confirmed arthroscopically. The distal ulna was approached through a longitudinal incision between the extensor carpi ulnaris and flexor carpi ulnaris. We performed a transverse resection of the ulna fixed with a small locking compression plate. The contralateral side served as the reference for the length of shortening (mean, 2.4 mm; range, 1-5 mm). Disappearance of ulnar abutment was then confirmed again arthroscopically. Results (Group A) Most patients showed good long-term clinical results. About half of the patients showed a bony spur at the distal radioulnar joint (DRUJ), but the clinical results did not significantly correlate with presence of bony spurs. Radiological parameters wre not related to the presence of bony spurs. (Group B) Twenty-four of the 66 patients investigated prospectively underwent an ulnar shortening osteotomy, with all showing good clinical results at 18 months postoperatively. Conclusions Ulnar shortening osteotomy can change the load of the ulnar side of the wrist and appears useful for ulnar-sided wrist pain in the presence of ulnar impaction. Level of evidence IV.
| S-EPMC4078192 | biostudies-other
Project description:BackgroundAlthough several techniques for the treatment of ulnar impaction syndrome (UIS) have been introduced, there have still been reports on various complications such as delayed union, nonunion, refracture, wrist pain, plate irritation, and chronic regional pain syndrome. This study aimed to compare the differences in radiological and clinical outcomes of patients in which intramedullary bone grafting was performed in addition to plate stabilization with those without additional bone grafting during ulnar shortening osteotomies (USOs).MethodsBetween November 2014 and June 2021, 53 wrists of 50 patients with idiopathic UIS were retrospectively reviewed. Patients were divided into 2 groups according to whether intramedullary bone grafting was performed. Among the 53 wrists, USO with an intramedullary bone graft was performed in 21 wrists and USO without an intramedullary bone graft was performed in 32 wrists. Demographic data and factors potentially associated with bone union time were analyzed.ResultsThere was no significant difference between the 2 groups when comparing postoperative radioulnar distance, postoperative ulnar variance, amount of ulnar shortening, and postoperative Disabilities of the Arm, Shoulder and Hand score. Compared to the without-intramedullary bone graft group, bone union time of the osteotomy site was significantly shortened, from 8.8 ± 3.0 weeks to 6.7 ± 1.3 weeks in the with-intramedullary bone graft group. Moreover, there were no cases of nonunion or plate-induced symptoms. Both in univariable and multivariable analyses, intramedullary bone grafting was associated with shorter bone union time.ConclusionsUSO with an intramedullary bone graft for idiopathic UIS has favorable radiological and clinical outcomes. The advantage of this technique is the significant shortening of bone union time.
| S-EPMC10973609 | biostudies-literature
Project description:Ulnar shortening osteotomy is an established and frequently performed surgical procedure in wrist surgery. The technical aspects of the procedure have continued to develop in recent years, with instruments and implants being developed specifically for this purpose. Ulnar shortening osteotomy is required for different clinical indications and situations. These varying indications demand different amounts of shortening, but all must be precise and accurate. Controversy exists as to how this can best be achieved in terms of the location for osteotomy, the surgical approach and geometry of the osteotomy, as well as which implant to use to provide optimal stability. The goal of all techniques (besides successfully resolving the underlying problem) is to achieve reliable and rapid bone union without compromising early functional rehabilitation and also to avoid hardware complications. The AO Hand Expert Group has developed a specialized instrumentation system with dedicated and specifically designed implants to ensure exact and accurate cutting with precise and rigid stabilization of the ulna. The matched drill guides and double-blade saws allow accurate completion of the planned amount of shortening together with precise coaptation of the osteotomy fragments. The specific ulnar osteotomy LCP (locking compression plate) combines maximum stability with minimum bulk and soft tissue irritation. The features of the implant, its surgical technique, and early results are described.
| S-EPMC4078186 | biostudies-other
Project description:BackgroundWrist pain on the ulnar side is often caused by ulnar impaction syndrome (UIS). Idiopathic UIS requires surgical treatment when conservative treatment fails. The 2 main surgical procedures used are the wafer procedure and ulnar shortening osteotomy (USO) of the metaphysis or diaphysis. This review aimed to analyze comparative studies of the 2 procedures in UIS to determine clinical outcomes and complications.MethodsOne prospective and 5 retrospective comparison trials were retrieved from the PubMed, Embase, and Cochrane Library databases. The primary outcomes were treatment effectiveness; pain visual analog scale (VAS), disabilities of the arm, shoulder, and hand (DASH) score, Mayo wrist, and Darrow scores. The incidence of postoperative complications formed the secondary outcome.ResultsThe selected studies included 107 patients who underwent the wafer procedure (G1) and 117 patients who underwent USO (G2). The wafer procedure had the benefits of less postoperative immobilization and an early return to work. However, there were no significant differences in the postoperative pain improvement and functional scores. All 6 studies reported high total complication rates and reoperation with USO. The most frequent complication was implant-related discomfort or irritation; subsequent plate removal was the most common reason for a secondary operation.ConclusionsThere was no difference in pain improvement or the postoperative functional score between the groups. Nevertheless, postoperative complications were the major pitfalls of USO. As the specialized shortening system advances further, a high-level study will be necessary to determine the surgical option in UIS.
| S-EPMC10545262 | biostudies-literature
Project description:BackgroundCorrective osteotomy using dorsal plates and structural bone graft usually has been used for treating symptomatic distal radius malunions. However, the procedure is technically demanding and requires an extensive dorsal approach. Residual deformity is a relatively frequent complication of this technique.Questions/purposesWe evaluated the clinical applicability of a three-dimensional osteotomy using computer-aided design and manufacturing techniques with volar locking plates for distal radius malunions.Patients and methodsTen patients with metaphyseal radius malunions were treated. Corrective osteotomy was simulated with the help of three-dimensional bone surface models created using CT data. We simulated the most appropriate screw holes in the deformed radius using computer-aided design data of a locking plate. During surgery, using a custom-made surgical template, we predrilled the screw holes as simulated. After osteotomy, plate fixation using predrilled screw holes enabled automatic reduction of the distal radial fragment. Autogenous iliac cancellous bone was grafted after plate fixation.ResultsThe median volar tilt, radial inclination, and ulnar variance improved from -20°, 13°, and 6 mm, respectively, before surgery to 12°, 24°, and 1 mm, respectively, after surgery. The median wrist flexion improved from 33° before surgery to 60° after surgery. The median wrist extension was 70° before surgery and 65° after surgery. All patients experienced wrist pain before surgery, which disappeared or decreased after surgery.ConclusionsSurgeons can operate precisely and easily using this advanced technique. It is a new treatment option for malunion of distal radius fractures.
| S-EPMC3094613 | biostudies-literature
Project description:BackgroundTo provide surgical support for corrective osteotomy, we developed an image fusion system for three-dimensional (3D) preoperative planning and fluoroscopy. To assess the utility of this image fusion system, we evaluated the reproducibility of preoperative planning for corrective osteotomy of dorsally angulated distal radius malunion using the system and compared reproducibility without using the system.MethodsTen wrists from 10 distal radius malunion patients who underwent corrective osteotomy were evaluated. 3D preoperative planning and the image fusion system were used for the image fusion group (n = 5). Only 3D preoperative planning was used for the control group (n = 5). 3D preoperative planning was performed for both groups in order to assess reduction, placement, and the choice of implants. In the image fusion group, the outline of the planned image was displayed on a monitor and overlapped with fluoroscopy images during surgery. Reproducibility was evaluated using preoperative plan and postoperative 3D images. Images were compared with the 3D coordinates of the radial styloid process (1), the volar and dorsal edges of the sigmoid notch (2) (3), and the barycentric coordinates of the three reference points. The reproducibility of the preoperative plan was evaluated by the distance of the coordinates between the plan and postoperative images for the reference points.ResultsThe distances between preoperative planning and postoperative reduction in the image fusion group were 2.1 ± 1.1 mm, 1.8 ± 0.7 mm, 1.9 ± 0.9 mm, and 1.4 ± 0.7 mm for reference points (1), (2), (3), and the barycenter, respectively. The distances between preoperative planning and postoperative reduction in the control group were 3.7 ± 1.0 mm, 2.8 ± 2.0 mm, 1.7 ± 0.8 mm, and 1.8 ± 1.2 mm for reference points (1), (2), (3), and the barycenter, respectively. The difference in reference point (1) was significantly smaller in the image fusion group than in the control group (P < 0.05).ConclusionCorrective osteotomy using an image fusion system will become a new surgical support method for fracture malunion. Trial registration Registered as NCT03764501 at ClinicalTrials.gov.
| S-EPMC8244167 | biostudies-literature
Project description:BackgroundA corrective radius osteotomy is often performed in patients with a symptomatic distal radius malunion. In 3D-planned osteotomies, the unaffected radius is mirrored over the malunited radius after adjusting for left-right length differences using both ulnae. This approach assumes that ulnar length differences in a malunion population are similar to those in a healthy population. This study was conducted to analyze the difference in ulnar length in a distal radius malunion population and to assess the potential influence of age, sex, or malunion side on this difference.MethodsWe evaluated 65 adult patients with distal radius malunion using bilateral forearm CT scans. 3D models of both ulnae were constructed, and length differences were determined along a standardized length axis. The results were compared to two populations without a radius malunion.ResultsThe average absolute ulnar length difference was 2.57 mm (SD 1.81), which was comparable to the two healthy populations. This difference was not significantly affected by age, sex, or malunion side.ConclusionThis study demonstrated that using the ulnar length difference to correct for radial length difference in the current 3D planning process, before using the contralateral radius as a template for a corrective osteotomy in patients with radius malunion, is safe.
| S-EPMC11363621 | biostudies-literature
Project description:RationaleHabitual volar dislocation of the ulnar head with a locked distal radioulnar joint (DRUJ) is a rare complication after distal radius fracture. We present a case of habitual volar dislocation of the ulnar head in a woman with a dorsally displaced malunited distal radius fracture.Patient concernsA 72-year-old woman presented with occasional painful locking of the forearm in full supination. She had fractured the left distal radius in a fall 6 months previously. The fracture had been treated non-surgically with wrist immobilization in a long and short arm cast for 6 weeks. Physical examination showed no swelling of the left hand. The wrist locked when the forearm was fully supinated, and the patient was not able to pronate her forearm without reducing the ulna by pressing the left ulna down toward the DRUJ. She experienced sharp pain during the reduction procedure and pronation of the left forearm. The affected wrist had 91% motion compared with the contralateral wrist.DiagnosisRadiography and computed tomography showed 28° dorsally angulated malunion of the distal radius and ulnar head subluxation with respect to the radius. Magnetic resonance imaging revealed disruption of the ulnar-side triangular fibrocartilage complex (TFCC) from the ulna fovea.InterventionsThe patient desired surgery to address the painful click during full supination of her left wrist and the limitations in her activities of daily living. Corrective osteotomy of the distal radius and arthroscopic repair of the ulnar-side tear of the TFCC were performed. The TFCC was arthroscopically repaired to the ulnar fovea to stabilize the DRUJ.OutcomesAt 1 year postoperatively, radiography showed complete union of the radius. The affected side had 97% wrist motion compared with the contralateral wrist and a full range of forearm rotation without pain or clicking. The grasp strength was 100% compared with the normal wrist.LessonsMalunited distal radius fracture with concomitant TFCC injury can result in habitual volar dislocation of the ulnar head due to severely dorsally angulated malunion of the radius and avulsion of the ulnar-side TFCC from the ulna fovea. This condition required corrective osteotomy plus TFCC repair.
| S-EPMC7373515 | biostudies-literature