Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Design and realization of a planar ultrawideband antenna with notch band at 3.5 GHz.

ABSTRACT: A small antenna with single notch band at 3.5 GHz is designed for ultrawideband (UWB) communication applications. The fabricated antenna comprises a radiating monopole element and a perfectly conducting ground plane with a wide slot. To achieve a notch band at 3.5 GHz, a parasitic element has been inserted in the same plane of the substrate along with the radiating patch. Experimental results shows that, by properly adjusting the position of the parasitic element, the designed antenna can achieve an ultrawide operating band of 3.04 to 11 GHz with a notched band operating at 3.31-3.84 GHz. Moreover, the proposed antenna achieved a good gain except at the notched band and exhibits symmetric radiation patterns throughout the operating band. The prototype of the proposed antenna possesses a very compact size and uses simple structures to attain the stop band characteristic with an aim to lessen the interference between UWB and worldwide interoperability for microwave access (WiMAX) band.

SUBMITTER: Azim R

PROVIDER: S-EPMC4124236 | biostudies-other | 2014

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

RF Dataset of Incumbent Radar Signals in the 3.5 GHz CBRS Band

Project description: Not available

| S-EPMC7347377 | biostudies-literature

A Rectangular Notch-Band UWB Antenna with Controllable Notched Bandwidth and Centre Frequency.

Project description:This paper presents the design and realization of a compact ultra-wideband (UWB) antenna with a rectangular notch wireless area network (WLAN) band that has controllable notched bandwidth and center frequency. The UWB characteristics of the antenna are achieved by truncating the lower ends of the rectangular microstrip patch, and the notch characteristics are obtained by using electromagnetic bandgap (EBG) structures. EBGs consist of two rectangular metallic conductors loaded on the back of the radiator, which is connected to the patch by shorting pins. A rectangular notch at the WLAN band with high selectivity is realized by tuning the individual resonant frequencies of the EBGs and merging them. Furthermore, the results show that the bandwidth and frequency of the rectangular notch band could be controlled according to the on-demand rejection band applications. In the demonstration, the rectangular notch band was shifted to X-band satellite communication by tuning the EBG parameters. The simulated and measured results show that the proposed antenna has an operational bandwidth from 3.1-12.5 GHz for |S11| < -10 with a rectangular notch band from 5-6 GHz, thus rejecting WLAN band signals. The antenna also has additional advantages: the overall size of the compact antenna is 16 × 25 × 1.52 mm3 and it has stable gain and radiation patterns.

| S-EPMC7038389 | biostudies-literature

Bandwidth enhancement of a dual band planar monopole antenna using meandered microstrip feeding.

Project description:A meandered-microstrip fed circular shaped monopole antenna loaded with vertical slots on a high dielectric material substrate (ε r = 15) is proposed in this paper. The performance criteria of the proposed antenna have been experimentally verified by fabricating a printed prototype. The experimental results show that the proposed antenna has achieved wider bandwidth with satisfactory gain by introducing meandered-microstrip feeding in assistant of partial ground plane. It is observed that, the -10 dB impedance bandwidth of the proposed antenna at lower band is 44.4% (600 MHz-1 GHz) and at upper band is 28% (2.25 GHz-2.95 GHz). The measured maximum gains of -1.18 dBi and 4.87 dBi with maximum radiation efficiencies have been observed at lower band and upper band, respectively. The antenna configuration and parametric study have been carried out with the help of commercially available computer-aided EM simulator, and a good accordance is perceived in between the simulated and measured results. The analysis of performance criteria and almost consistent radiation pattern make the proposed antenna a suitable candidate for UHF RFID, WiMAX, and WLAN applications.

| S-EPMC3958724 | biostudies-other

Impacts of high dose 3.5 GHz cellphone radiofrequency on zebrafish embryonic development.

Project description:The rapid deployment of 5G spectrum by the telecommunication industry is intended to promote better connectivity and data integration among various industries. However, since exposures to radio frequency radiations (RFR) >2.4 GHz are still uncommon, concerns about their potential health impacts are ongoing. In this study, we used the embryonic zebrafish model to assess the impacts of a 3.5 GHz RFR on biology- a frequency typically used by 5G-enabled cell phones and lies within the 4G and 5G bandwidth. We established a plate-based exposure setup for RFRs, exposed developing zebrafish to 3.5 GHz RFR, specific absorption rate (SAR) ? 8.27 W/Kg from 6 h post fertilization (hpf) to 48 hpf, and measured a battery of morphological and behavioral endpoints at 120 hpf. Our results revealed no significant impacts on mortality, morphology or photomotor response and a modest inhibition of startle response suggesting some levels of sensorimotor disruptions. This suggests that the cell phone radiations at low GHz-level frequencies are likely benign, with subtle sensorimotor effects. Through this assessment, we have established a robust setup for zebrafish RFR exposures readily amenable to testing various powers and frequencies. Future developmental exposure studies in zebrafish will evaluate a wider portion of the radio frequency spectrum to discover the bioactive regions, the potential molecular targets of RFR and the potential long-term effects on adult behavior.

| S-EPMC7347199 | biostudies-literature

Analysis and Design of a Compact Leaky-Wave Antenna for Wide-Band Broadside Radiation.

Project description:A low-cost compact planar leaky-wave antenna (LWA) is proposed offering directive broadside radiation over a significantly wide bandwidth. The design is based on an annular metallic strip grating (MSG) configuration, placed on top of a dual-layer grounded dielectric substrate. This defines a new two-layer parallel-plate open waveguide, whose operational principles are accurately investigated. To assist in our antenna design, a method-of-moments dispersion analysis has been developed to characterize the relevant TM and TE modes of the perturbed guiding structure. By proper selection of the MSG for a fabricated prototype and its supporting dielectric layers as well as the practical TM antenna feed embedded in the bottom ground plane, far-field pencil-beam patterns are observed at broadside and over a wide frequency range, i.e., from 21.9?GHz to 23.9?GHz, defining a radiating percentage bandwidth of more than 8.5%. This can be explained by a dominantly excited TM mode, with low dispersion, employed to generate a two-sided far-field beam pattern which combines to produce a single beam at broadside over frequency. Some applications of this planar antenna include radar and satellite communications at microwave and millimeter-wave frequencies as well as future 5G communication devices and wireless power transmission systems.

| S-EPMC6288108 | biostudies-other

Realization of multiple orbital angular momentum modes simultaneously through four-dimensional antenna arrays.

Project description:Electromagnetic waves carrying orbital angular momentum (OAM) in radio frequency range have drawn great attention owing to its potential applications in increasing communication capacity. In this paper, both single-pole single-throw (SPST) switches and single-pole double-throw (SPDT) switches are designed and implemented. Optimal time sequence allows four-dimensional (4-D) circular antenna array to generate multiple OAM-carrying waves as well as enhance the field intensity of each OAM-carrying wave. A novel experimental platform is developed to measure the phase distribution when the transmitting antenna and the receiving antenna operate at different frequencies. The good agreement between the measurement and simulation results demonstrate that 4-D circular antenna array is able to generate multiple OAM modes simultaneously. Furthermore, the superiority of the 4-D circular antenna array in receiving and demodulating multiple OAM-carrying signals is validated through the filter and bit error rate (BER) simulations.

| S-EPMC5760727 | biostudies-literature

Four-band non-Abelian topological insulator and its experimental realization.

Project description:Very recently, increasing attention has been focused on non-Abelian topological charges, e.g., the quaternion group Q8. Different from Abelian topological band insulators, these systems involve multiple entangled bulk bandgaps and support nontrivial edge states that manifest the non-Abelian topological features. Furthermore, a system with an even or odd number of bands will exhibit a significant difference in non-Abelian topological classification. To date, there has been scant research investigating even-band non-Abelian topological insulators. Here, we both theoretically explore and experimentally realize a four-band PT (inversion and time-reversal) symmetric system, where two new classes of topological charges as well as edge states are comprehensively studied. We illustrate their difference in the four-dimensional (4D) rotation sense on the stereographically projected Clifford tori. We show the evolution of the bulk topology by extending the 1D Hamiltonian onto a 2D plane and provide the accompanying edge state distributions following an analytical method. Our work presents an exhaustive study of four-band non-Abelian topological insulators and paves the way towards other even-band systems.

| S-EPMC8578628 | biostudies-literature

Optimization of Planar Monopole Wideband Antenna for Wireless Communication System.

Project description:In this paper, a new compact wideband monopole antenna is presented for wireless communication applications. This antenna comprises of a new radiating patch, a new arc-shaped strip, microstrip feed line, and a notched ground plane. The proposed radiating patch is combined with a rectangular and semi-circular patch and is integrated with a partial ground plane to provide a wide impedance bandwidth. The new arc-shaped strip between the radiating patch and microstrip feed line creates an extra surface on the patch, which helps further widen the bandwidth. Inserting one step notch on the ground plane further enhances the bandwidth. The antenna has a compact size of 16×20×1.6mm3. The measured result indicated that the antenna achieves a 127% bandwidth at VSWR?2, ranging from 4.9GHz to 22.1GHz. Stable radiation patterns with acceptable gain are achieved. Also, a measured bandwidth of 107.7% at VSWR?1.5 (5.1-17GHz) is obtained, which is suitable for UWB outdoor propagation. This antenna is compatible with a good number of wireless standards, including UWB band, Wimax 5.4 GHz band, MVDDS (12.2-12.7GHz), and close range radar and satellite communication in the X-band (8-12GHz), and Ku band (12-18GHz).

| S-EPMC5161350 | biostudies-literature

Pulsed 3.5 GHz high power microwaves irradiation on physiological solution and their biological evaluation on human cell lines.

Project description:Microwave (MW) radiation is increasingly being used for several biological applications. Many investigations have focused on understanding the potential influences of pulsed MW irradiation on biological solutions. The current study aimed to investigate the effects of 3.5 GHz pulsed MW radiation-irradiated liquid solutions on the survival of human cancer and normal cells. Different physiological solutions such as phosphate buffer saline, deionized water, and Dulbecco's modified Eagle medium (DMEM) for cell culture growth were irradiated with pulsed MW radiation (45 shots with the energy of 1 mJ/shot). We then evaluated physiological effects such as cell viability, metabolic activity, mitochondrial membrane potential, cell cycle, and cell death in cells treated with MW-irradiated biological solutions. As MW irradiation with power density ~ 12 kW/cm2 mainly induces reactive nitrogen oxygen species in deionized water, it altered the cell cycle, membrane potential, and cell death rates in U373MG cells due to its high electric field ~ 11 kV/cm in water. Interestingly, MW-irradiated cell culture medium and phosphate-buffered saline did not alter the cellular viability and metabolic energy of cancer and normal cells without affecting the expression of genes responsible for cell death. Taken together, MW-irradiated water can alter cellular physiology noticeably, whereas irradiated media and buffered saline solutions induce negligible or irrelevant changes that do not affect cellular health.

| S-EPMC8055702 | biostudies-literature

Realization of flat band with possible nontrivial topology in electronic Kagome lattice.

Project description:The energy dispersion of fermions or bosons vanishes in momentum space if destructive quantum interference occurs in a frustrated Kagome lattice with only nearest-neighbor hopping. A discrete flat band (FB) without any dispersion is consequently formed, promising the emergence of fractional quantum Hall states at high temperatures. Here, we report the experimental realization of an FB with possible nontrivial topology in an electronic Kagome lattice on twisted multilayer silicene. Because of the unique low-buckled two-dimensional structure of silicene, a robust electronic Kagome lattice has been successfully induced by moiré patterns after twisting the silicene multilayers. The electrons are localized in the Kagome lattice because of quantum destructive interference, and thus, their kinetic energy is quenched, which gives rise to an FB peak in the density of states. A robust and pronounced one-dimensional edge state has been revealed at the Kagome edge, which resides at higher energy than the FB. Our observations of the FB and the exotic edge state in electronic Kagome lattice open up the possibility that fractional Chern insulators could be realized in two-dimensional materials.

| S-EPMC6239431 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data