Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Lubrication by Polyelectrolyte Brushes.

ABSTRACT: We develop a scaling model relating the friction forces between two polyelectrolyte brushes sliding over each other to the separation between grafted surfaces, number of monomers and charges per chain, grafting density of chains, and solvent quality. We demonstrate that the lateral force between brushes increases upon compression, but to a lesser extent than the normal force. The shear stress at larger separations is due to solvent slip layer friction. The thickness of this slip layer sharply decreases at distances on the order of undeformed brush thickness. The corresponding effective viscosity of the layer sharply increases from the solvent viscosity to a much higher value, but this increase is smaller than the jump of the normal force resulting in the drop of the friction coefficient. At stronger compression we predict the second sharp increase of the shear stress corresponding to interpenetration of the chains from the opposite brushes. In this regime the velocity-dependent friction coefficient between two partially interpenetrating polyelectrolyte brushes does not depend on the distance between substrates because both normal and shear forces are reciprocally proportional to the plate separation. Although lateral forces between polyelectrolyte brushes are larger than between bare surfaces, the enhancement of normal forces between opposing polyelectrolyte brushes with respect to normal forces between bare charged surfaces is much stronger resulting in lower friction coefficient. The model quantitatively demonstrates how polyelectrolyte brushes provide more effective lubrication than bare charged surfaces or neutral brushes.

SUBMITTER: Zhulina EB

PROVIDER: S-EPMC4146326 | biostudies-other | 2014 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Electroresponse of weak polyelectrolyte brushes.

Project description:End-tethered polyelectrolytes are widely used to modify substrate properties, particularly for lubrication or wetting. External stimuli, such as pH, salt concentration, or an electric field, can induce profound structural responses in weak polyelectrolyte brushes, which can be utilized to further tune substrate properties. We study the structure and electroresponsiveness of weak polyacid brushes using an inhomogeneous theory that incorporates both electrostatic and chain connectivity correlations at the Debye-Hückel level. Our calculation shows that a weak polyacid brush swells under the application of a negative applied potential, in agreement with recent experimental observation. We rationalize this behavior using a scaling argument that accounts for the effect of the surface charge. We also show that the swelling behavior has a direct influence on the differential capacitance, which can be modulated by the solvent quality, pH, and salt concentration.

| S-EPMC10501941 | biostudies-literature

Charging behavior of single-stranded DNA polyelectrolyte brushes.

Project description:DNA monolayers are widely used in fundamental and applied genomics and are versatile experimental models for elucidating the behavior of charged polymers at interfaces. The physical behavior of these systems is to a large extent governed by their internal ionic microenvironment, which is investigated here for layers of end-tethered, single-stranded DNA oligonucleotides (DNA brushes). Retention of counterions by the DNA brush manifests as lowered susceptibility of the interfacial capacitance to external salt conditions. A physical model based on concepts adapted from polymer science was used to further elucidate the connection between monolayer organization and its charging behavior. The data indicate a reorganization of the monolayer with changes in ionic strength and strand coverage that is consistent with that expected for a polyelectrolyte brush. A method for electrochemical quantification of strand coverage, based on shift of reduction potential for redox counterions associated with the DNA monolayer, is also described. These results provide guidance for development of label-free electrochemical diagnostics employing DNA monolayers and formulate a description of monolayer behavior within a polymer science framework.

| S-EPMC2527127 | biostudies-literature

Behavior of Weak Polyelectrolyte Brushes in Mixed Salt Solutions.

Project description:Hydrophilic and hydrophobic weak polybasic brushes immersed in aqueous solutions of mixed salt counterions are considered using a mean-field numerical self-consistent field approach. On top of the solvent quality of the polymer, the counterion-solvent interactions are accounted for by implementing Flory-Huggins interaction parameters. We show that ion specificity within the brush can bring about large changes in conformation. It is found that the collapse transition of hydrophobic, weak polyelectrolyte brushes features an intermediate two-phase state wherein a subset of chains are collapsed in a dense layer at the substrate, while the remainder of chains are well-solvated and strongly stretched away from the it. Besides pH and ionic strength, solvent quality of counterions and the composition of ions in the solvent are important control parameters for the behavior of polyelectrolyte brushes. Increasingly hydrophobic counterions penetrate deeper within the brush and stabilize the collapsed region, while hydrophilic counterions do the opposite.

| S-EPMC5814957 | biostudies-literature

Multivalent ions induce lateral structural inhomogeneities in polyelectrolyte brushes.

Project description:Subtle details about a polyelectrolyte's surrounding environment can dictate its structural features and potential applications. Atomic force microscopy (AFM), surface forces apparatus (SFA) measurements, and coarse-grained molecular dynamics simulations are combined to study the structure of planar polyelectrolyte brushes [poly(styrenesulfonate), PSS] in a variety of solvent conditions. More specifically, AFM images provide a first direct visualization of lateral inhomogeneities on the surface of polyelectrolyte brushes collapsed in solutions containing trivalent counterions. These images are interpreted in the context of a coarse-grained molecular model and are corroborated by accompanying interaction force measurements with the SFA. Our findings indicate that lateral inhomogeneities are absent from PSS brush layers collapsed in a poor solvent without multivalent ions. Together, AFM, SFA, and our molecular model present a detailed picture in which solvophobic and multivalent ion-induced effects work in concert to drive strong phase separation, with electrostatic bridging of polyelectrolyte chains playing an essential role in the collapsed structure formation.

| S-EPMC5722652 | biostudies-literature

Uptake of pH-Sensitive Gold Nanoparticles in Strong Polyelectrolyte Brushes.

Project description:The impact of electrostatic attraction on the uptake of gold nanoparticles (AuNPs) into positively charged strong poly-[2-(Methacryloyloxy) ethyl] trimethylammonium chloride (PMETAC) polyelectrolyte brushes was investigated. In this work, PMETAC brushes were synthesized via surface-initiated atom transfer radical polymerization (Si-ATRP). PMETAC/AuNP composite materials were prepared by incubation of the polymer brush coated samples into 3-mercaptopropionic acid-capped AuNP (5 nm in diameter) suspension. The electrostatic interactions were tuned by changing the surface charge of the AuNPs through variations in pH value, while the charge of the PMETAC brush was not affected. Atomic-force microscopy (AFM), ellipsometry, UV/Vis spectroscopy, gravimetric analysis and transmission electron microscopy (TEM) were employed to study the loading and penetration into the polymer brush. The results show that the number density of attached AuNPs depends on the pH value and increases with increasing pH value. There is also strong evidence that the particle assembly is dependent on the pH value of the AuNP suspension. Incubation of PMETAC brushes in AuNP suspension at pH 4 led to the formation of a surface layer on top of the brush (2D assembly) due to sterical hindrance of the clustered AuNPs, while incubation in AuNP suspension at pH 8 led to deeper particle penetration into the brush (3D assembly). The straightforward control of particle uptake and assembly by tuning the charge density of the nanoparticle surface is a valuable tool for the development of materials for colorimetric sensor applications.

| S-EPMC6432499 | biostudies-literature

Application of spherical polyelectrolyte brushes microparticle system in flocculation and retention.

Project description:In this paper, a microparticle system consisting of cationic polyacrylamide (CPAM) and anionic spherical polyelectrolyte brushes (ASPB) is proposed to improve the retention of pulp suspension containing bleached reed kraft pulp and precipitated calcium carbonate (PCC). We first describe the preparation of ASPB. The ASPB, consisting of a carbon sphere (CS) core and a shell of sodium polystyrene sulfonate (PSSNa) brushes, was synthesized by surface-initiated polymerization. The structure and morphology of ASPB were characterized by Fourier-transform infrared spectrometry (FTIR), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). Then, flocculation and retention of pulp suspension by a CPAM/ASPB dual-component system were examined. Our results indicate that more highly effective flocculation and higher retention efficiency could be achieved simultaneously by a CPAM/ASPB dual-component system when compared to the conventional microparticle system. Bridging flocculation and electrostatic attraction might be the main flocculation mechanism for CPAM/ASPB systems.

| S-EPMC7240434 | biostudies-literature

Reorganization of hydrogen bond network makes strong polyelectrolyte brushes pH-responsive.

Project description:Weak polyelectrolytes have found extensive practical applications owing to their rich pH-responsive properties. In contrast, strong polyelectrolytes have long been regarded as pH-insensitive based on the well-established fact that the average degree of charging of strong polyelectrolyte chains is independent of pH. The possible applications of strong polyelectrolytes in smart materials have, thus, been severely limited. However, we demonstrate that almost all important properties of strong polyelectrolyte brushes (SPBs), such as chain conformation, hydration, stiffness, surface wettability, lubricity, adhesion, and protein adsorption are sensitive to pH. The pH response originates from the reorganization of the interchain hydrogen bond network between the grafted chains, triggered by the pH-mediated adsorption-desorption equilibrium of hydronium or hydroxide with the brushes. The reorganization process is firmly identified by advanced sum-frequency generation vibrational spectroscopy. Our findings not only provide a new understanding of the fundamental properties of SPBs but also uncover an extensive family of building blocks for constructing pH-responsive materials.

| S-EPMC4975552 | biostudies-literature

Combined Experimental and Theoretical Study of Weak Polyelectrolyte Brushes in Salt Mixtures.

Project description:The swelling behavior of a hydrophobic poly(2diisopropylamino)ethyl methacrylate (PDPA) brush immersed in aqueous solutions of single and mixed salts has been investigated using ellipsometry and numerical self-consistent field (nSCF) theory. As a function of solution ionic strength, the osmotic and salted brush regimes of weak polyelectrolyte brushes as well as substantial specific anion effects in the presence of K+ salts of Cl-, NO3-, and SCN- are found. For solutions containing mixtures of NO3- and Cl-, the brush swelling is the same as one would expect on the basis of the concentration-weighted average of the brush behavior in the single salt solutions. However, in mixtures of SCN- and Cl-, the swelling response is more complicated and substantial divergence from ideal behavior is observed. Mean-field theory shows excellent qualitative agreement with the ellipsometry findings. nSCF reveals that for the SCN-/Cl- cases the swelling behavior of the PDPA brush most likely arises from the predominant localization of the weakly hydrated SCN- within the brush compared to the more strongly hydrated Cl-.

| S-EPMC6407915 | biostudies-literature

Spherical Polyelectrolyte Brushes as Templates to Prepare Hollow Silica Spheres Encapsulating Metal Nanoparticles.

Project description:Integrating hollow silica spheres with metal nanoparticles to fabricate multifunctional hybrid materials has attracted increasing attention in catalysis, detection, and drug delivery. Here, we report a simple and general method to prepare hollow silica spheres encapsulating silver nanoparticles (Ag@SiO2) based on spherical polyelectrolyte brushes (SPB), which consist of a polystyrene core and densely grafted poly (acrylic acid) (PAA) chains. SPB were firstly used as nanoreactors to generate silver nanoparticles in situ and then used as sacrificial templates to prepare hybrid hollow silica spheres. The resulted Ag@SiO2 composites exhibit high catalytic activity and good reusability for the reduction of 4-nitrophenol to 4-aminophenol by NaBH4. More importantly, this developed approach can be extended to the encapsulation of other metal nanoparticles such as gold nanoparticles into the hollow silica spheres. This work demonstrates that SPB are promising candidates for the preparation of hollow spheres with encapsulated metal nanoparticles and the resulted hybrid spheres show great potential applications in catalysis.

| S-EPMC7221898 | biostudies-literature

A facile route to electronically conductive polyelectrolyte brushes as platforms of molecular wires.

Project description:A facile strategy for the synthesis of conjugated polyelectrolyte brushes grafted from a conductive surface is presented. Such brushes form a platform of molecular wires oriented perpendicularly to the surface, enabling efficient directional transport of charge carriers. As the synthesis of conjugated polymer brushes using chain-growth polymerization via a direct "grafting from" approach is very challenging, we developed a self-templating surface-initiated method. It is based on the formation of multimonomer template chains in the first surface-initiated polymerization step, followed by the second polymerization leading to conjugated chains in an overall ladder-like architecture. This strategy exploits the extended conformation of the surface-grafted brushes, thereby enabling alignment of the pendant polymerizable groups along the template chains. We synthesized a new bifunctional monomer and used the developed approach to obtain quaternized poly(ethynylpyridine) chains on a conductive indium tin oxide surface. A catalyst-free quaternization polymerization was for the first time used here for surface grafting. The presence of charged groups makes the obtained brushes both ionically and electronically conductive. After doping with iodine, the brushes exhibited electronic conductivity, in the direction perpendicular to the surface, as high as 10-1-100 S m-1. Tunneling AFM was used for mapping the surface conductivity and measuring the conductivity in the spectroscopic mode. The proposed synthetic strategy is very versatile as a variety of monomers with pendant polymerizable groups and various polymerization techniques may be applied, leading to platforms of molecular wires with the desired characteristics.

| S-EPMC5644116 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data