Fault detection and diagnosis for gas turbines based on a kernelized information entropy model.
Ontology highlight
ABSTRACT:
SUBMITTER: Wang W
PROVIDER: S-EPMC4167449 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Fault diagnosis of rolling bearings is a critical task, and in previous research, convolutional neural networks (CNN) have been used to process vibration signals and perform fault diagnosis. However, traditional CNN models have certain limitations in terms of accuracy. To improve accuracy, we propose a method that combines the Gramian angular difference field (GADF) with residual networks (ResNet) and embeds frequency channel attention module (Fca) in the ResNet to diagnose rolling bearing fault. Firstly, we used GADF to convert the signals into RGB three-channel fault images during data preprocessing. Secondly, to further enhance the performance of the model, on the foundation of the ResNet we embedded the frequency channel attention module with discrete cosine transform (DCT) to form Fca, to effectively explores the channel information of fault images and identifies the corresponding fault characteristics. Finally, the experiment validated that the accuracy of the new model reaches 99.3% and the accuracy reaches 98.6% even under an unbalanced data set, which significantly improves the accuracy of fault diagnosis and the generalization of the model.
| S-EPMC10803066 | biostudies-literature
Project description: Not available
| S-EPMC10862546 | biostudies-literature
Project description:At present, the fault diagnosis of pumping units in major oil fields in China is time-consuming and inefficient, and there is no universal problem for high requirements of hardware resources. In this study, a fault fusion diagnosis method of pumping unit based on improved Fourier descriptor (IDF) and rapid density clustering RBF (RDC-RBF) neural network is proposed. Firstly, the minimum inertia axis of the center of gravity of the indicator diagram is obtained. The farthest point of the intersection of the inertial axis and the contour is determined as the starting point. Then Fourier transform is performed on the contour boundary of the graph to obtain the feature vector. Then, combining with the idea of fast density clustering algorithm, the number of hidden layer neurons of RBF is determined by finding the point with the highest density and using it as the hidden layer neuron. At the same time, the characteristics of Gaussian function are introduced to ensure the activity of hidden layer neurons. Finally, through dynamic adaptive cuckoo search (DACS), the step size is automatically adjusted according to the convergence speed of the objective function of RBF, and the efficiency and accuracy of RBF in different search stages are balanced. The optimal parameters such as the width and weight of RBF are determined, and the optimal RDC-RBF fault diagnosis model is established. The model is applied to the diagnosis of different fault types of pumping units, and compared with the current mainstream models. The average detection accuracy of the fusion RDC-RBF fault diagnosis method proposed in this paper reaches 96.3%. The measured results have high accuracy and short time. At the same time, this method is currently applied to oil production sites such as Shengli Oilfield in China, which greatly reduces the human resources required for fault diagnosis of pumping units in the past.
| S-EPMC10519606 | biostudies-literature
Project description:Transmission lines are most prone to faults in the transmission system, so high-precision fault diagnosis is very important for quick troubleshooting. There are some problems in current intelligent fault diagnosis research methods, such as difficulty in extracting fault features accurately, low fault recognition accuracy and poor fault tolerance. In order to solve these problems, this paper proposes an intelligent fault diagnosis method for high voltage direct current transmission lines (HVDC) based on Gramian angular difference field (GADF) domain and improved convolutional neural network (VGG16). This method first performs variational modal decomposition (VMD) on the original fault voltage signal, and then uses the correlation coefficient method to select the appropriate intrinsic mode function (IMF) component, and converts it into a two-dimensional image using the Gramian Angular Difference Field(GADF). Finally, the improved VGG16 network is used to extract and classify fault features adaptively to realize fault diagnosis. In order to improve the performance of the VGG16 fault diagnosis model, batch normalization, dense connection and global average pooling techniques are introduced. The comparative experimental results show that the model proposed in this paper can further identify fault features and has a high fault diagnosis accuracy. In addition, the method is not affected by fault type, transitional resistance and fault distance, has good anti-interference ability, strong fault tolerance, and has great potential in practical applications.
| S-EPMC9506613 | biostudies-literature
Project description:Aiming at the problems of insufficient extraction of asynchronous motor fault features by traditional deep learning algorithms and poor diagnosis of asynchronous motor faults in robust noise environments, this paper proposes an end-to-end fault diagnosis method for asynchronous motors based on IInception-CBAM-IBiGRU. The method first uses a signal-to-grayscale image conversion method to convert one-dimensional vibration signals into two-dimensional images and initially extracts shallow features through two-dimensional convolution; then the Improved Inception (IInception) module is used as a residual block to learning features at different scales with a residual structure, and extracts its important feature information through the Convolutional Block Attention Module (CBAM) to extract important feature information and adjust the weight parameters; then the feature information is input to the Improved Bi-directional Gate Recurrent Unit (IBiGRU) to extract its timing features further; finally, the fault identification is achieved by the SoftMax function. The primary hyperparameters in the model are optimized by the Weighted Mean Of Vectors Algorithm (INFO). The experimental results show that the method is effective in fault diagnosis of asynchronous motors, with an accuracy rate close to 100%, and can still maintain a high accuracy rate under the condition of low noise ratio, with good robustness and generalization ability.
| S-EPMC10908808 | biostudies-literature
Project description:Fault detection and diagnosis is one of the most critical components of preventing accidents and ensuring the system safety of industrial processes. In this paper, we propose an integrated learning approach for jointly achieving fault detection and fault diagnosis of rare events in multivariate time series data. The proposed approach combines an autoencoder to detect a rare fault event and a long short-term memory (LSTM) network to classify different types of faults. The autoencoder is trained with offline normal data, which is then used as the anomaly detection. The predicted faulty data, captured by autoencoder, are put into the LSTM network to identify the types of faults. It basically combines the strong low-dimensional nonlinear representations of the autoencoder for the rare event detection and the strong time series learning ability of LSTM for the fault diagnosis. The proposed approach is compared with a deep convolutional neural network approach for fault detection and identification on the Tennessee Eastman process. Experimental results show that the combined approach accurately detects deviations from normal behaviour and identifies the types of faults within the useful time.
| S-EPMC6866134 | biostudies-literature
Project description:The difficulty in directly determining the failure mode of the submersible screw pump will shorten the life of the system and the normal production of the oil well. This thesis aims to identify the fault forms of submersible screw pump accurately and efficiently, and proposes a fault diagnosis method of the submersible screw pump based on random forest. HDFS storage system and MapReduce processing system are established based on Hadoop big data processing platform; Furthermore, the Bagging algorithm is used to collect the training set data. Also, this thesis adopts the CART method to establish the sample library and the decision trees for a random forest model. Six continuous variables, four categorical variables and fault categories of submersible screw pump oil production system are used for training the decision trees. As several decision trees constitute a random forest model, the parameters to be tested are input into the random forest models, and various types of decision trees are used to determine the failure category in the submersible screw pump. It has been verified that the accuracy rate of fault diagnosis is 92.86%. This thesis can provide some meaningful guidance for timely detection of the causes of downhole unit failures, reducing oil well production losses, and accelerating the promotion and application of submersible screw pumps in oil fields.
| S-EPMC7668568 | biostudies-literature
Project description:A major issue of machinery fault diagnosis using vibration signals is that it is over-reliant on personnel knowledge and experience in interpreting the signal. Thus, machine learning has been adapted for machinery fault diagnosis. The quantity and quality of the input features, however, influence the fault classification performance. Feature selection plays a vital role in selecting the most representative feature subset for the machine learning algorithm. In contrast, the trade-off relationship between capability when selecting the best feature subset and computational effort is inevitable in the wrapper-based feature selection (WFS) method. This paper proposes an improved WFS technique before integration with a support vector machine (SVM) model classifier as a complete fault diagnosis system for a rolling element bearing case study. The bearing vibration dataset made available by the Case Western Reserve University Bearing Data Centre was executed using the proposed WFS and its performance has been analysed and discussed. The results reveal that the proposed WFS secures the best feature subset with a lower computational effort by eliminating the redundancy of re-evaluation. The proposed WFS has therefore been found to be capable and efficient to carry out feature selection tasks.
| S-EPMC5738058 | biostudies-literature
Project description:The running of high-speed electrically driven feed pump has a direct impact on the safety of personnel equipment and economic benefits of power plant, as the result, intelligent condition monitoring and fault diagnosis of electrically driven feed pump becomes an urgent need. In the practical process of electrically driven feed pump fault diagnosis, the running of the equipment is in normal state for a long time, occasionally, with faults, which makes the fault data very rare in a large number of monitoring data, and makes it difficult to extract the internal fault features behind the original time series data, When the deep learning theory is used in practice, the imbalance between the fault data and the normal data occurs in the operation data set. In order to solve the problem of data imbalance, this paper proposes a fault diagnosis method of GAN-SAE. This method first makes compensation for the imbalance of sample data based on the Generative Adversarial Network (GAN), and then uses the Stacked Auto Encoder (SAE) method to extract the signal features. By designing the fault diagnosis program, compared with only using SAE, back propagation neural networks (BP) and multi-hidden layer neural networks(MNN) method, the GAN-SAE method can offer better capability of extracting features, and the accuracy of fault diagnosis of electrically driven feed pump could be improved to 98.89%.
| S-EPMC7581010 | biostudies-literature
Project description:Rotating machinery is one of the most typical types of mechanical equipment and plays a significant role in industrial applications. Condition monitoring and fault diagnosis of rotating machinery has gained wide attention for its significance in preventing catastrophic accident and guaranteeing sufficient maintenance. With the development of science and technology, fault diagnosis methods based on multi-disciplines are becoming the focus in the field of fault diagnosis of rotating machinery. This paper presents a multi-discipline method based on image-processing for fault diagnosis of rotating machinery. Different from traditional analysis method in one-dimensional space, this study employs computing method in the field of image processing to realize automatic feature extraction and fault diagnosis in a two-dimensional space. The proposed method mainly includes the following steps. First, the vibration signal is transformed into a bi-spectrum contour map utilizing bi-spectrum technology, which provides a basis for the following image-based feature extraction. Then, an emerging approach in the field of image processing for feature extraction, speeded-up robust features, is employed to automatically exact fault features from the transformed bi-spectrum contour map and finally form a high-dimensional feature vector. To reduce the dimensionality of the feature vector, thus highlighting main fault features and reducing subsequent computing resources, t-Distributed Stochastic Neighbor Embedding is adopt to reduce the dimensionality of the feature vector. At last, probabilistic neural network is introduced for fault identification. Two typical rotating machinery, axial piston hydraulic pump and self-priming centrifugal pumps, are selected to demonstrate the effectiveness of the proposed method. Results show that the proposed method based on image-processing achieves a high accuracy, thus providing a highly effective means to fault diagnosis for rotating machinery.
| S-EPMC5053415 | biostudies-literature