Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Image analysis to estimate mulch residue in soil.

ABSTRACT: Mulching is used to improve the condition of agricultural soils by covering the soil with different materials, mainly black polyethylene (PE). However, problems derived from its use are how to remove it from the field and, in the case of it remaining in the soil, the possible effects on it. One possible solution is to use biodegradable plastic (BD) or paper (PP), as mulch, which could present an alternative, reducing nonrecyclable waste and decreasing the environmental pollution associated with it. Determination of mulch residues in the ground is one of the basic requirements to estimate the potential of each material to degrade. This study has the goal of evaluating the residue of several mulch materials over a crop campaign in Central Spain through image analysis. Color images were acquired under similar lighting conditions at the experimental field. Different thresholding methods were applied to binarize the histogram values of the image saturation plane in order to show the best contrast between soil and mulch. Then the percentage of white pixels (i.e., soil area) was used to calculate the mulch deterioration. A comparison of thresholding methods and the different mulch materials based on percentage of bare soil area obtained is shown.

SUBMITTER: Moreno C

PROVIDER: S-EPMC4182845 | biostudies-other | 2014

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Development of an Image Analysis Pipeline to Estimate Sphagnum Colony Density in the Field.

Project description:Sphagnum peatmosses play an important part in water table management of many peatland ecosystems. Keeping the ecosystem saturated, they slow the breakdown of organic matter and release of greenhouse gases, facilitating peatland's function as a carbon sink rather than a carbon source. Although peatland monitoring and restoration programs have increased recently, there are few tools to quantify traits that Sphagnum species display in their ecosystems. Colony density is often described as an important determinant in the establishment and performance in Sphagnum but detailed evidence for this is limited. In this study, we describe an image analysis pipeline that accurately annotates Sphagnum capitula and estimates plant density using open access computer vision packages. The pipeline was validated using images of different Sphagnum species growing in different habitats, taken on different days and with different smartphones. The developed pipeline achieves high accuracy scores, and we demonstrate its utility by estimating colony densities in the field and detecting intra and inter-specific colony densities and their relationship with habitat. This tool will enable ecologists and conservationists to rapidly acquire accurate estimates of Sphagnum density in the field without the need of specialised equipment.

| S-EPMC8143480 | biostudies-literature

Biogas residue parameterization for soil organic matter modeling.

Project description:A variety of biogas residues (BGRs) have been used as organic fertilizer in agriculture. The use of these residues affects the storage of soil organic matter (SOM). In most cases, SOM changes can only be determined in long-term observations. Therefore, predictive modeling can be an efficient alternative, provided that the parameters required by the model are known for the considered BGRs. This study was conducted as a first approach to estimating the organic matter (OM) turnover parameters of BGRs for process modeling. We used carbon mineralization data from six BGRs from an incubation experiment, representing a range of substrate inputs, to calculate a turnover coefficient k controlling the velocity of fresh organic matter (FOM) decay and a synthesis coefficient ? describing the SOM creation from FOM. An SOM turnover model was applied in inverse mode to identify both parameters. In a second step, we related the parameters k and ? to chemical properties of the corresponding BGRs using a linear regression model and applied them to a long-term scenario simulation. According to the results of the incubation experiment, the k values ranged between 0.28 and 0.58 d-1 depending on the chemical composition of the FOM. The estimated ? values ranged between 0.8 and 0.89. The best linear relationship of k was found to occur with pH (R2 = 0.863). Parameter ? is related to the Ct/Norg ratio (R2 = 0.696). Long-term scenario simulations emphasized the necessity of specific k and ? values related to the chemical properties for each BGR. However, further research is needed to validate and improve these preliminary results.

| S-EPMC6185722 | biostudies-literature

Soil Moisture Data Assimilation to Estimate Irrigation Water Use.

Project description:Knowledge of irrigation is essential to support food security, manage depleting water resources, and comprehensively understand the global water and energy cycles. Despite the importance of understanding irrigation, little consistent information exists on the amount of water that is applied for irrigation. In this study, we develop and evaluate a new method to predict daily to seasonal irrigation magnitude using a particle batch smoother data assimilation approach, where land surface model soil moisture is applied in different configurations to understand how characteristics of remotely sensed soil moisture may impact the performance of the method. The study employs a suite of synthetic data assimilation experiments, allowing for systematic diagnosis of known error sources. Assimilation of daily synthetic soil moisture observations with zero noise produces irrigation estimates with a seasonal bias of 0.66% and a correlation of 0.95 relative to a known truth irrigation. When synthetic observations were subjected to an irregular overpass interval and random noise similar to the Soil Moisture Active Passive satellite (0.04 cm3 cm-3), irrigation estimates produced a median seasonal bias of <1% and a correlation of 0.69. When systematic biases commensurate with those between NLDAS-2 land surface models and Soil Moisture Active Passive are imposed, irrigation estimates show larger biases. In this application, the particle batch smoother outperformed the particle filter. The presented framework has the potential to provide new information into irrigation magnitude over spatially continuous domains, yet its broad applicability is contingent upon identifying new method(s) of determining irrigation schedule and correcting biases between observed and simulated soil moisture, as these errors markedly degraded performance.

| S-EPMC6988458 | biostudies-literature

Proposing a New Method Based on Image Analysis to Estimate the Segregation Index of Lightweight Aggregate Concretes.

Project description:This work presents five different methods for quantifying the segregation phenomenon in lightweight aggregate concretes (LWAC). The use of LWACs allows greater design flexibility and substantial cost savings, and has a positive impact on the energy consumption of a building. However, these materials are susceptible to aggregate segregation, which causes an irregular distribution of the lightweight aggregates in the mixture and may affect the concrete properties. To quantify this critical process, a new method based on image analysis is proposed and its results are compared to the well-established methods of density and ultrasonic pulse velocity measurement. The results show that the ultrasonic test method presents a lower accuracy than the other studied methods, although it is a nondestructive test, easy to perform, and does not need material characterization. The new methodology via image analysis has a strong correlation with the other methods, it considers information from the complete section of the samples, and it does not need the horizontal cut of the specimens or material characterization.

| S-EPMC6862299 | biostudies-literature

Incorporating statistical strategy into image analysis to estimate effects of steam and allyl isocyanate on weed control.

Project description:Weeds are the major limitation to efficient crop production, and effective weed management is necessary to prevent yield losses due to crop-weed competition. Assessments of the relative efficacy of weed control treatments by traditional counting methods is labor intensive and expensive. More efficient methods are needed for weed control assessments. There is extensive literature on advanced techniques of image analysis for weed recognition, identification, classification, and leaf area, but there is limited information on statistical methods for hypothesis testing when data are obtained by image analysis (RGB decimal code). A traditional multiple comparison test, such as the Dunnett-Tukey-Kramer (DTK) test, is not an optimal statistical strategy for the image analysis because it does not fully utilize information contained in RGB decimal code. In this article, a bootstrap method and a Poisson model are considered to incorporate RGB decimal codes and pixels for comparing multiple treatments on weed control. These statistical methods can also estimate interpretable parameters such as the relative proportion of weed coverage and weed densities. The simulation studies showed that the bootstrap method and the Poisson model are more powerful than the DTK test for a fixed significance level. Using these statistical methods, three soil disinfestation treatments, steam, allyl-isothiocyanate (AITC), and control, were compared. Steam was found to be significantly more effective than AITC, a difference which could not be detected by the DTK test. Our study demonstrates that an appropriate statistical method can leverage statistical power even with a simple RGB index.

| S-EPMC6768448 | biostudies-literature

Comparative analysis of bones, mites, soil chemistry, nematodes and soil micro-eukaryotes from a suspected homicide to estimate the post-mortem interval.

Project description:Criminal investigations of suspected murder cases require estimating the post-mortem interval (PMI, or time after death) which is challenging for long PMIs. Here we present the case of human remains found in a Swiss forest. We have used a multidisciplinary approach involving the analysis of bones and soil samples collected beneath the remains of the head, upper and lower body and "control" samples taken a few meters away. We analysed soil chemical characteristics, mites and nematodes (by microscopy) and micro-eukaryotes (by Illumina high throughput sequencing). The PMI estimate on hair 14C-data via bomb peak radiocarbon dating gave a time range of 1 to 3 years before the discovery of the remains. Cluster analyses for soil chemical constituents, nematodes, mites and micro-eukaryotes revealed two clusters 1) head and upper body and 2) lower body and controls. From mite evidence, we conclude that the body was probably brought to the site after death. However, chemical analyses, nematode community analyses and the analyses of micro-eukaryotes indicate that decomposition took place at least partly on site. This study illustrates the usefulness of combining several lines of evidence for the study of homicide cases to better calibrate PMI inference tools.

| S-EPMC5758714 | biostudies-literature

Feasibility of image-based simulation to estimate ablation target in human ventricular arrhythmia.

Project description:Previous studies suggest that magnetic resonance imaging with late gadolinium enhancement (LGE) may identify slowly conducting tissues in scar-related ventricular tachycardia (VT).To test the feasibility of image-based simulation based on LGE to estimate ablation targets in VT.We conducted a retrospective study in 13 patients who had preablation magnetic resonance imaging for scar-related VT ablation. We used image-based simulation to induce VT and estimate target regions according to the simulated VT circuit. The estimated target regions were coregistered with the LGE scar map and the ablation sites from the electroanatomical map in the standard ablation approach.In image-based simulation, VT was inducible in 12 (92.3%) patients. All VTs showed macroreentrant propagation patterns, and the narrowest width of estimated target region that an ablation line should span to prevent VT recurrence was 5.0 ± 3.4 mm. Of 11 patients who underwent ablation, the results of image-based simulation and the standard approach were consistent in 9 (82%) patients, where ablation within the estimated target region was associated with acute success (n = 8) and ablation outside the estimated target region was associated with failure (n = 1). In 1 (9%) case, the results of image-based simulation and the standard approach were inconsistent, where ablation outside the estimated target region was associated with acute success.The image-based simulation can be used to estimate potential ablation targets of scar-related VT. The image-based simulation may be a powerful noninvasive tool for preprocedural planning of ablation procedures to potentially reduce the procedure time and complication rates.

| S-EPMC3735782 | biostudies-literature

Soil microbial metabolism on carbon and nitrogen transformation links the crop-residue contribution to soil organic carbon.

Project description:The beneficial effect of crop residue amendment on soil organic carbon (SOC) stock and stability depends on the functional response of soil microbial communities. Here we synchronized microbial metagenomic analysis, nuclear magnetic resonance and plant-15N labeling technologies to gain understanding of how microbial metabolic processes affect SOC accumulation in responses to differences in N supply from residues. Residue amendment brought increases in the assemblage of genes involved in C-degradation profiles from labile to recalcitrant C compounds as well as N mineralization. The N mineralization genes were correlated with the C and N accumulation in the particulate and mineral-associated C pools, and plant-derived aliphatic forms of SOC. Thus, the combined C and N metabolic potential of the microbial community transforms residue into persistent organic compounds, thereby increasing C and N sequestration in stable SOC pools. This study emphasizes potential microbially mediated mechanisms by which residue N affects C sequestration in soils.

| S-EPMC8975862 | biostudies-literature

Effect of tillage and crop residue on soil temperature following planting for a Black soil in Northeast China.

Project description:Crop residue return is imperative to maintain soil health and productivity but some farmers resist adopting conservation tillage systems with residue return fearing reduced soil temperature following planting and crop yield. Soil temperatures were measured at 10?cm depth for one month following planting from 2004 to 2007 in a field experiment in Northeast China. Tillage treatments included mouldboard plough (MP), no till (NT), and ridge till (RT) with maize (Zea mays L.) and soybean (Glycine max Merr.) crops. Tillage had significant effects on soil temperature in 10 of 15 weekly periods. Weekly average NT soil temperature was 0-1.5?°C lower than MP, but the difference was significant (P?<?0.05) only in 2007 when residue was not returned in MP the previous autumn. RT showed no clear advantage over NT in increasing soil temperature. Higher residue coverage caused lower soil temperature; the effect was greater for maize than soybean residue. Residue type had significant effect on soil temperature in 9 of 15 weekly periods with 0-1.9?°C lower soil temperature under maize than soybean residue. Both tillage and residue had small but inconsistent effect on soil temperature following planting in Northeast China representative of a cool to temperate zone.

| S-EPMC5852035 | biostudies-literature

Ascomycota members dominate fungal communities during straw residue decomposition in arable soil.

Project description:This study investigated the development of fungal community composition in arable soil during the degradation of straw residue. We explored the short-term responses of the fungal community over 28 days of decomposition in soil using culture-independent polymerase chain reaction in combination with a clone library and denaturing gradient gel electrophoresis (DGGE). Fungal cellobiohydrolase I (cbhI) genes in the soil were also characterized, and their diversity suggested the existence of a different cellulose decomposer. The DGGE profiles based on fungal internal transcribed spacer analysis showed different successions of fungal populations during residue decomposition. Members of Lecythophora and Sordariales were dominant in the early succession, while Hypocrea and Engyodontium were better adapted in the late succession. The succession of fungal communities might be related to changes of residue quality during decomposition. Collectively, sequences assigned to Ascomycota members were dominant at different stages of the fungal succession during decomposition, revealing that they were key drivers responsible for residue degradation in the arable soil tested.

| S-EPMC3688710 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data