Numerical evaluation of the scale problem on the wind flow of a windbreak.
Ontology highlight
ABSTRACT:
SUBMITTER: Liu B
PROVIDER: S-EPMC4196098 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Transverse dunes, which form under unidirectional winds and have fixed profile in the direction perpendicular to the wind, occur on all celestial objects of our solar system where dunes have been detected. Here we perform a numerical study of the average turbulent wind flow over a transverse dune by means of computational fluid dynamics simulations. We find that the length of the zone of recirculating flow at the dune lee - the separation bubble - displays a surprisingly strong dependence on the wind shear velocity, u: it is nearly independent of u for shear velocities within the range between 0.2 m/s and 0.8 m/s but increases linearly with u for larger shear velocities. Our calculations show that transport in the direction opposite to dune migration within the separation bubble can be sustained if u is larger than approximately 0.39 m/s, whereas a larger value of u (about 0.49 m/s) is required to initiate this reverse transport.
| S-EPMC3790208 | biostudies-other
Project description:We present, to our knowledge, the first direct numerical simulation of 3D cellular-scale blood flow in physiologically realistic microvascular networks. The vascular networks are designed following in vivo images and data, and are comprised of bifurcating, merging, and winding vessels. Our model resolves the large deformation and dynamics of each individual red blood cell flowing through the networks with high fidelity, while simultaneously retaining the highly complex geometric details of the vascular architecture. To our knowledge, our simulations predict several novel and unexpected phenomena. We show that heterogeneity in hemodynamic quantities, which is a hallmark of microvascular blood flow, appears both in space and time, and that the temporal heterogeneity is more severe than its spatial counterpart. The cells are observed to frequently jam at vascular bifurcations resulting in reductions in hematocrit and flow rate in the daughter and mother vessels. We find that red blood cell jamming at vascular bifurcations results in several orders-of-magnitude increase in hemodynamic resistance, and thus provides an additional mechanism of increased in vivo blood viscosity as compared to that determined in vitro. A striking result from our simulations is negative pressure-flow correlations observed in several vessels, implying a significant deviation from Poiseuille's law. Furthermore, negative correlations between vascular resistance and hematocrit are observed in various vessels, also defying a major principle of particulate suspension flow. To our knowledge, these novel findings are absent in blood flow in straight tubes, and they underscore the importance of considering realistic physiological geometry and resolved cellular interactions in modeling microvascular hemodynamics.
| S-EPMC5770972 | biostudies-literature
Project description:In this work, the numerical data related to wind turbine micrositing problem is presented. The data is acquired using the differential evolution algorithm (DEA) at different wind speeds. The data obtained through DEA include total dissipated power, cost per installation of unit turbine, and the efficiency of algorithm after installation of any particular number turbines; and are depicted versus number of turbines. The data provided in this paper can be used directly without having to spend weeks of computational time to simulate the results; and can readily be used for comparison with other existing (Massan et al. [1] and Rajper et al. [2], etc.) and forthcoming algorithms in future.
| S-EPMC5635204 | biostudies-literature
Project description:In this work, a numerical solution for the extrapolation problem of a discrete set of n values of an unknown analytic function is developed. The proposed method is based on a novel numerical scheme for the rapid calculation of higher order derivatives, exhibiting high accuracy, with error magnitude of O(10-100) or less. A variety of integrated radial basis functions are utilized for the solution, as well as variable precision arithmetic for the calculations. Multiple alterations in the function's direction, with no curvature or periodicity information specified, are efficiently foreseen. Interestingly, the proposed procedure can be extended in multiple dimensions. The attained extrapolation spans are greater than two times the given domain length. The significance of the approximation errors is comprehensively analyzed and reported, for 5832 test cases.
| S-EPMC6750076 | biostudies-literature
Project description:The objective of the p-median problem is to identify p source locations and map them to n destinations while minimizing the average distance between destinations and corresponding sources. Several heuristic algorithms have been developed to solve this general class of facility location problems. In this study, we add to the current literature in two ways: (1) we present a thorough evaluation of existing classic heuristics and (2) we investigate the effect of spatial distribution of destination locations, and the number of sources and destinations on the performance of these algorithms for varying problem sizes using synthetic and real datasets. The performance of these algorithms is evaluated using the objective function value, time taken to achieve the solution, and the stability of the solution. The sensitivity of existing algorithms to the spatial distribution of destinations and scale of the problem with respect to the three metrics is analyzed in the paper. The utility of the study is demonstrated by evaluating these algorithms to select the locations of ad-hoc clinics that need to be set up for resource distribution during a bio-emergency. We demonstrate that interchange algorithms achieve good quality solutions with respect to both the execution time and cost function values, and they are more stable for clustered distributions.
| S-EPMC8341018 | biostudies-literature
Project description:The data presented in this article were the basis for the study reported in the research articles entitled "Evaluation of a two-sided windcatcher integrated with wing wall (as a new design) and comparison with a conventional windcatcher" (P. Nejat, J.K. Calautit, M.Z.A. Majid, B.R. Hughes, I. Zeynali, F. Jomehzadeh, 2016) [1] which presents the effect of wing wall on the air flow distribution under using the windcatchers as a natural ventilation equipment. Here, we detail the wind tunnel testing and numerical set-up used for obtaining the data on ventilation rates and indoor airflow distribution inside a test room with a two-sided windcatcher and wing wall. Three models were integrated with wing wall angled at 30°, 45° and 60° and another windcatcher was a conventional two-sided device. The computer-aided design (CAD) three-dimensional geometries which were produced using Solid Edge modeler are also included in the data article.
| S-EPMC5040639 | biostudies-literature
Project description:The solar wind is a magnetized plasma and as such exhibits collective plasma behavior associated with its characteristic spatial and temporal scales. The characteristic length scales include the size of the heliosphere, the collisional mean free paths of all species, their inertial lengths, their gyration radii, and their Debye lengths. The characteristic timescales include the expansion time, the collision times, and the periods associated with gyration, waves, and oscillations. We review the past and present research into the multi-scale nature of the solar wind based on in-situ spacecraft measurements and plasma theory. We emphasize that couplings of processes across scales are important for the global dynamics and thermodynamics of the solar wind. We describe methods to measure in-situ properties of particles and fields. We then discuss the role of expansion effects, non-equilibrium distribution functions, collisions, waves, turbulence, and kinetic microinstabilities for the multi-scale plasma evolution.
| S-EPMC6934245 | biostudies-literature
Project description:Diffusioosmosis concerns ionic flow driven by a concentration difference in a charged nano-confinement and has significant applications in micro/nano-fluidics because of its nonlinear current-voltage response, thereby acting as an active electric gating. We carry out a comprehensive computation fluid dynamics simulation to investigate diffusioosmotic flow in a charged nanochannel of linearly varying height under an electrolyte concentration gradient. We analyze the effects of cone angle (α), nanochannel length (l) and tip diameter (dt), concentration difference (Δc = 0-1 mM), and external flow on the diffusioosmotic velocity in a tapered nanochannel with a constant surface charge density (σ). External flow velocity (varied over five orders of magnitude) shows a negligible influence on the diffusioosmotic flow inside the tapered nanochannel. We observed that a cone angle causes diffusioosmotic flow to move towards the direction of increasing gap thickness because of stronger local electric field caused by the overlapping of electric double layers near the smaller orifice. Moreover, the magnitude of average nanoflow velocity increases with increasing |α|. Flow velocity at the nanochannel tip increases when dt is smaller or when l is greater. In addition, the magnitude of diffusioosmotic velocity increases with increasing Δc. Our numerical results demonstrate the nonlinear dependence of tapered, diffusioosmotic flow on various crucial control parameters, e.g., concentration difference, cone angle, tip diameter, and nanochannel length, whereas an insignificant relationship on flow rate in the low Peclet number regime is observed.
| S-EPMC9143036 | biostudies-literature
Project description:The data presented in this article were the basis for the study reported in the research articles entitled 'A validated design methodology for a closed loop subsonic wind tunnel' (Calautit et al., 2014) [1], which presented a systematic investigation into the design, simulation and analysis of flow parameters in a wind tunnel using Computational Fluid Dynamics (CFD). The authors evaluated the accuracy of replicating the flow characteristics for which the wind tunnel was designed using numerical simulation. Here, we detail the numerical and experimental set-up for the analysis of the closed-loop subsonic wind tunnel with an empty test section.
| S-EPMC4773566 | biostudies-literature
Project description:World wind power resources are abundant, but their utilization could be limited because wind fluctuates rather than providing steady power. We hypothesize that wind power output could be stabilized if wind generators were located in a meteorologically designed configuration and electrically connected. Based on 5 yr of wind data from 11 meteorological stations, distributed over a 2,500 km extent along the U.S. East Coast, power output for each hour at each site is calculated. Each individual wind power generation site exhibits the expected power ups and downs. But when we simulate a power line connecting them, called here the Atlantic Transmission Grid, the output from the entire set of generators rarely reaches either low or full power, and power changes slowly. Notably, during the 5-yr study period, the amount of power shifted up and down but never stopped. This finding is explained by examining in detail the high and low output periods, using reanalysis data to show the weather phenomena responsible for steady production and for the occasional periods of low power. We conclude with suggested institutions appropriate to create and manage the power system analyzed here.
| S-EPMC2867728 | biostudies-literature