Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Cross-linking amine-rich compounds into high performing selective CO2 absorbents.

ABSTRACT: Amine-based absorbents play a central role in CO2 sequestration and utilization. Amines react selectively with CO2, but a drawback is the unproductive weight of solvent or support in the absorbent. Efforts have focused on metal organic frameworks (MOFs) reaching extremely high CO2 capacity, but limited selectivity to N2 and CH4, and decreased uptake at higher temperatures. A desirable system would have selectivity (cf. amine) and high capacity (cf. MOF), but also increased adsorption at higher temperatures. Here, we demonstrate a proof-of-concept where polyethyleneimine (PEI) is converted to a high capacity and highly selective CO2 absorbent using buckminsterfullerene (C(60)) as a cross-linker. PEI-C(60) (CO2 absorption of 0.14 g/g at 0.1 bar/90 °C) is compared to one of the best MOFs, Mg-MOF-74 (0.06 g/g at 0.1 bar/90 °C), and does not absorb any measurable amount of CH4 at 50 bar. Thus, PEI-C(60) can perform better than MOFs in the sweetening of natural gas.

SUBMITTER: Andreoli E

PROVIDER: S-EPMC4252903 | biostudies-other | 2014 Dec

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Cross-linking amine-rich compounds into high performing selective CO2 absorbents.

Andreoli Enrico E Dillon Eoghan P EP Cullum Laurie L Alemany Lawrence B LB Barron Andrew R AR

Scientific reports 20141203

Amine-based absorbents play a central role in CO2 sequestration and utilization. Amines react selectively with CO2, but a drawback is the unproductive weight of solvent or support in the absorbent. Efforts have focused on metal organic frameworks (MOFs) reaching extremely high CO2 capacity, but limited selectivity to N2 and CH4, and decreased uptake at higher temperatures. A desirable system would have selectivity (cf. amine) and high capacity (cf. MOF), but also increased adsorption at higher t ...[more]

PMID: 25467054

Similar Datasets

High-Selective CO2 Capture in Amine-Decorated Al-MOFs

Project description:Amine-functionalized metal-organic framework (MOF) material is a promising CO2 captor in the post-combustion capture process owing to its large CO2 working capacity as well as high CO2 selectivity and easy regeneration. In this study, an ethylenediamine (ED)-decorated Al-based MOFs (named ED@MOF-520) with a high specific area and permanent porosity are prepared and evaluated to study the adsorption and separation of CO2 from N2. The results show that ED@MOF-520 adsorbent displays a superior CO2 capture performance with a CO2/N2 separation factor of 50 at 273 K, 185% times increase in the CO2/N2 separation efficiency in comparison with blank MOF-520. Furthermore, ED@MOF-520 exhibits a moderate-strength interaction with 29 kJ mol−1 adsorption heat for CO2 uptake, which not only meets the requirement of CO2 adsorption but also has good cycle stability. This work provides a promising adsorbent with a high CO2/N2 separation factor to deal with carbon peak and carbon neutrality.

| S-EPMC9697124 | biostudies-literature

Boosted Cross-Linking and Characterization of High-Performing Self-Assembling Peptides.

Project description:Tissue engineering (TE) strategies require the design and characterization of novel biomaterials capable of mimicking the physiological microenvironments of the tissues to be regenerated. As such, implantable materials should be biomimetic, nanostructured and with mechanical properties approximating those of the target organ/tissue. Self-assembling peptides (SAPs) are biomimetic nanomaterials that can be readily synthesized and customized to match the requirements of some TE applications, but the weak interactions involved in the self-assembling phenomenon make them soft hydrogels unsuited for the regeneration of medium-to-hard tissues. In this work, we moved significant steps forward in the field of chemical cross-linked SAPs towards the goal of stiff peptidic materials suited for the regeneration of several tissues. Novel SAPs were designed and characterized to boost the 4-(N-Maleimidomethyl) cyclohexane-1-carboxylic acid 3-sulpho-N-hydroxysuccinimide ester (Sulfo-SMCC) mediated cross-linking reaction, where they reached G' values of ~500 kPa. An additional orthogonal cross-linking was also effective and allowed to top remarkable G' values of 840 kPa. We demonstrated that cross-linking fastened the pre-existing self-aggregated nanostructures, and at the same time, a strong presence of ß-structures is necessary for an effective cross-linking of (LKLK)3-based SAPs. Combining strong SAP design and orthogonal cross-linking reactions, we brought SAP stiffness closer to the MPa threshold, and as such, we opened the door of the regeneration of skin, muscle and lung to biomimetic SAP technology.

| S-EPMC8838902 | biostudies-literature

Collagen cross-linking compounds in human urine.

Project description:We report the isolation and chemical characterization of collagen cross-linking compounds, 3-hydroxypyridinium and dihydroxylysinonorleucine, from human urine.

| S-EPMC1163193 | biostudies-other

Selective cross-linking of coinciding protein assemblies by in-gel cross-linking mass spectrometry.

Project description:Cross-linking mass spectrometry has developed into an important method to study protein structures and interactions. The in-solution cross-linking workflows involve time and sample consuming steps and do not provide sensible solutions for differentiating cross-links obtained from co-occurring protein oligomers, complexes, or conformers. Here we developed a cross-linking workflow combining blue native PAGE with in-gel cross-linking mass spectrometry (IGX-MS). This workflow circumvents steps, such as buffer exchange and cross-linker concentration optimization. Additionally, IGX-MS enables the parallel analysis of co-occurring protein complexes using only small amounts of sample. Another benefit of IGX-MS, demonstrated by experiments on GroEL and purified bovine heart mitochondria, is the substantial reduction of undesired over-length cross-links compared to in-solution cross-linking. We next used IGX-MS to investigate the complement components C5, C6, and their hetero-dimeric C5b6 complex. The obtained cross-links were used to generate a refined structural model of the complement component C6, resembling C6 in its inactivated state. This finding shows that IGX-MS can provide new insights into the initial stages of the terminal complement pathway.

| S-EPMC7883291 | biostudies-literature

Selective cross-linking of coinciding protein assemblies by in-gel cross-linking mass-spectrometry

| S-SCDT-EMBOJ-2020-106174 | biostudies-other

Assembly and Covalent Cross-Linking of an Amine-Functionalised Metal-Organic Cage.

Project description:The incorporation of reactive functional groups onto the exterior of metal-organic cages (MOCs) opens up new opportunities to link their well-defined scaffolds into functional porous solids. Amine moieties offer access to a rich catalogue of covalent chemistry; however, they also tend to coordinate undesirably and interfere with MOC formation, particular in the case of Cu2 paddlewheel-based MOCs. We demonstrate that tuning the basicity of an aniline-functionalized ligand enables the self-assembly of a soluble, amine-functionalized Cu4L4 lantern cage (1). Importantly, we show control over the coordinative propensity of the exterior amine of the ligand, which enables us to isolate a crystalline, two-dimensional metal-organic framework composed entirely of MOC units (2). Furthermore, we show that the nucleophilicity of the exterior amine of 1 can be accessed in solution to generate a cross-linked cage polymer (3) via imine condensation.

| S-EPMC8185198 | biostudies-literature

Photo-Cross-Linking Polymersome Nanoreactors with Size-Selective Permeability.

Project description:The design of stable, inert, and permeable nanoreactors remains a challenge due to the additives required to create a cross-linked network, limiting their potential for catalysis. Polymersomes are nanovesicles self-assembled from amphiphilic block copolymers that can act as nanoreactors by encapsulating catalysts. A major restriction toward their use is their stability and reduced permeability. In order to overcome this, polymersome membranes can be cross-linked to retain their shape and function. Here, we report the synthesis of a PEG-b-P(S-co-4-VBA) polymer, which can self-assemble into polymersomes and subsequently be cross-linked using UV light. We demonstrate that these polymersomes are stable over a long period of time in various organic solvents, that incorporation of functional handles on their surface is possible, and that they are able to undergo reactions. Additionally, we show that co-assembly with up to 40% PEG-b-PS present results in the formation of pores in the membrane structure, which allows for the structure to be used as a nanoreactor. By encapsulating a platinum nanocatalyst, we are able to catalyze the depropargylation of a small coumarin substrate, which was able to enter and leave the porous nanoreactor.

| S-EPMC9281476 | biostudies-literature

Tailoring Amine-Functionalized Ti-MOFs via a Mixed Ligands Strategy for High-Efficiency CO2 Capture.

Project description:Amine-functionalized metal-organic frameworks (MOFs) are a promising strategy for the high-efficiency capture and separation of CO2. In this work, by tuning the ratio of 1,3,5-benzenetricarboxylic acid (H3BTC) to 5-aminoisophthalic acid (5-NH2-H2IPA), we designed and synthesized a series of amine-functionalized highly stable Ti-based MOFs (named MIP-207-NH2-n, in which n represents 15%, 25%, 50%, 60%, and 100%). The structural analysis shows that the original framework of MIP-207 in the MIP-207-NH2-n (n = 15%, 25%, and 50%) MOFs remains intact when the mole ratio of ligand H3BTC to 5-NH2-H2IPA is less than 1 to 1 in the resulting MOFs. By the introduction of amino groups, MIP-207-NH2-25% demonstrates outstanding CO2 capture performance up to 3.96 and 2.91 mmol g-1, 20.7% and 43.3% higher than those of unmodified MIP-207 at 0 and 25 °C, respectively. Furthermore, the breakthrough experiment indicates that the dynamic CO2 adsorption capacity and CO2/N2 separation factors of MIP-207-NH2-25% are increased by about 25% and 15%, respectively. This work provides an additional strategy to construct amine-functionalized MOFs with the maintenance of the original MOF structure and high performance of CO2 capture and separation.

| S-EPMC8709442 | biostudies-literature

High-Strength Albumin Hydrogels With Hybrid Cross-Linking.

Project description:Natural protein-based hydrogels possess excellent biocompatibility; however, most of them are weak or brittle. In the present work, high strength hybrid dual-crosslinking BSA gels (BSA DC gels), which have both chemical cross-linking and physical cross-linking, were fabricated by a facile photoreaction-heating process. BSA DC gels showed high transparency (light transmittance of ~90%) and high strength. At optimal conditions, BSA DC gel exhibited high compressive strength (?c,f) of 37.81 ± 2.61 MPa and tensile strength (?t,f) of 0.62 ± 0.078 MPa, showing it to be much stronger than physically cross-linked BSA gel (BSA PC gel) and chemically cross-linked BSA gel (BSA CC gel). More importantly, BSA DC gel displayed non-swelling properties while maintaining high strength in DI water, pH = 3.0, and pH = 10.0. Moreover, BSA DC gel also demonstrated large hysteresis, rapid self-recovery, and excellent fatigue resistance properties. It is believed that our BSA DC gel can potentially be applied in biomedical fields.

| S-EPMC7052378 | biostudies-literature

Furan-modified oligonucleotides for fast, high-yielding and site-selective DNA inter-strand cross-linking with non-modified complements.

Project description:Among the various types of DNA damage, inter-strand cross-links (ICL) represent one of the most cytotoxic lesions. Processes such as transcription and replication can be fully blocked by ICLs, as shown by the mechanism of action of some anticancer drugs. However, repair of ICLs can be a possible cause of resistance. To study the mechanisms of cross-link repair stable, site-specifically cross-linked duplexes are needed. We here report on the synthesis of site-specifically cross-linked DNA using an acyclic furan containing nucleoside. Selective in situ oxidation of the incorporated furan moiety generates a highly reactive oxo-enal that instantly reacts with the complementary base in a non-modified strand, yielding one specific stable cross-linked duplex species. Varying sequence context showed that a strong selectivity for cross-linking to either complementary A or complementary C is operating, without formation of cross-links to neighboring or distant bases. Reaction times are very short and high isolated yields are obtained using only one equivalent of modified strand. The formed covalent link is stable and the isolated cross-linked duplexes can be stored for several months without degradation. Structural characterization of the obtained ICL was possible by comparison to the natural mutagenic adducts of cis-2-butene-1,4-dial, a metabolite of furan primarily responsible for furan carcinogenicity.

| S-EPMC2655669 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data